Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 14 May 2022 16:44:37 +0100
From:   Jonathan Cameron <jic23@kernel.org>
To:     LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Cc:     lars@metafoo.de, mchehab+huawei@kernel.org, ardeleanalex@gmail.com,
        linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
        robh+dt@kernel.org, mike.looijmans@topic.nl,
        devicetree@vger.kernel.org
Subject: Re: [PATCH V2 5/6] iio: accel: bmi088: Add support for bmi090l
 accel
Message-ID: <20220514164437.08c970ed@jic23-huawei>
In-Reply-To: <20220510141753.3878390-6-Qing-wu.Li@leica-geosystems.com.cn>
References: <20220510141753.3878390-1-Qing-wu.Li@leica-geosystems.com.cn>
        <20220510141753.3878390-6-Qing-wu.Li@leica-geosystems.com.cn>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Tue, 10 May 2022 14:17:52 +0000
LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> wrote:

> Add supports for BMI090L, it's a high-performance Inertial
> Measurement Unit, with an accelerometer and gyroscope.
> The commit adds the accelerometer driver for the SPI interface.
> The gyroscope part is already supported by the BMG160 driver.
> Same as BMI088, BMI090L have the range of +/-3, 6, 12, and 24g.
> 
> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
> Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
> ---
>  drivers/iio/accel/bmi088-accel-core.c | 7 +++++++
>  drivers/iio/accel/bmi088-accel-spi.c  | 1 +
>  2 files changed, 8 insertions(+)
> 
> diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c
> index 13bb3d96a3a6..6d44e97b4906 100644
> --- a/drivers/iio/accel/bmi088-accel-core.c
> +++ b/drivers/iio/accel/bmi088-accel-core.c
> @@ -472,6 +472,13 @@ static const struct bmi088_accel_chip_info bmi088_accel_chip_info_tbl[] = {
>  		.num_channels = ARRAY_SIZE(bmi088_accel_channels),
>  		.scale_table = {{0, 598}, {0, 1196}, {0, 2393}, {0, 4785}},
>  	},
> +	[2] = {
> +		.name = "bmi090l-accel",
> +		.chip_id = 0x1A,

Either order by chip_id or by name. I don't mind which but we do want some
logical ordering in this table so we know where to put future entries.

Thanks,

Jonathan

> +		.channels = bmi088_accel_channels,
> +		.num_channels = ARRAY_SIZE(bmi088_accel_channels),
> +		.scale_table = {{0, 897}, {0, 1795}, {0, 3590}, {0, 7179}},
> +	},
>  };
>  
>  static const struct iio_info bmi088_accel_info = {
> diff --git a/drivers/iio/accel/bmi088-accel-spi.c b/drivers/iio/accel/bmi088-accel-spi.c
> index e7a1daab8f3c..58be73ebd2dd 100644
> --- a/drivers/iio/accel/bmi088-accel-spi.c
> +++ b/drivers/iio/accel/bmi088-accel-spi.c
> @@ -62,6 +62,7 @@ static int bmi088_accel_remove(struct spi_device *spi)
>  static const struct spi_device_id bmi088_accel_id[] = {
>  	{"bmi088-accel", },
>  	{"bmi085-accel", },
> +	{"bmi090l-accel", },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(spi, bmi088_accel_id);