Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Mon, 16 May 2022 13:21:59 +0200
From:   =?iso-8859-1?Q?Jos=E9_Exp=F3sito?= <jose.exposito89@gmail.com>
To:     Stefan Berzl <stefanberzl@gmail.com>
Cc:     jikos@kernel.org, benjamin.tissoires@redhat.com, spbnick@gmail.com,
        linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: Status on hid xppen patch
Message-ID: <20220516112159.GA74406@elementary>
References: <941a793a-d2f7-9c2c-59be-b3930e1acfec@gmail.com>
 <20220423172330.32585-1-jose.exposito89@gmail.com>
 <95576534-1f5e-c2e3-4f73-c1b0a8300b56@gmail.com>
 <20220424093239.GA4380@elementary>
 <20220512205952.GA8936@elementary>
 <ebb6d627-4974-beed-1dc6-60634ab2f034@gmail.com>
 <20220516090829.GA20623@elementary>
 <140fe69a-c37a-cce4-c7c1-0344de6f1bf1@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <140fe69a-c37a-cce4-c7c1-0344de6f1bf1@gmail.com>
Precedence: bulk

On Mon, May 16, 2022 at 12:45:48PM +0200, Stefan Berzl wrote:
> Yo Jos?,
> 
> > Also, I don't know if you have seen this error after connecting the
> > tablet:
> > 
> >   xhci_hcd 0000:2a:00.3: WARN urb submitted to disabled ep
> >   usb 3-2: reset full-speed USB device number 6 using xhci_hcd
> >   usb 3-2: reset full-speed USB device number 6 using xhci_hcd
> >   [...]
> > 
> > It happens with the Deco Mini 4, even when using the hid-generic
> > driver. I need to rebase my patches on 5.19 and test again, just to
> > make sure the problem is not somewhere else.
> 
> Can't say I have seen it. The only thing I can think of is that I was
> using the async urb functions and that delay did something about it.

Thanks, I'll give it a try. I hope is not some kind of time based
condition.

By the way, I only see the error when the tablet is connected. If I run
"usbhid-dump" or unload and load the driver, it works as expected.
I don't know if this could be related to the driver failing to process
the response to the magic data... Investigating.

Thanks,
Jose