Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Chris Packham <chris.packham@alliedtelesis.co.nz>
To:     davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
        pabeni@redhat.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, andrew@lunn.ch,
        gregory.clement@bootlin.com, sebastian.hesselbarth@gmail.com,
        kabel@kernel.org
Cc:     netdev@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH 1/2] arm64: dts: armada-3720-turris-mox: Correct reg property for mdio devices
Date:   Tue, 17 May 2022 10:48:00 +1200
Message-Id: <20220516224801.1656752-2-chris.packham@alliedtelesis.co.nz>
In-Reply-To: <20220516224801.1656752-1-chris.packham@alliedtelesis.co.nz>
References: <20220516224801.1656752-1-chris.packham@alliedtelesis.co.nz>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

MDIO devices have #address-cells =3D <1>, #size-cells =3D <0>. Now that w=
e
have a schema enforcing this for marvell,orion-mdio we can see that the
turris-mox has a unnecessary 2nd cell for the switch nodes reg property
of it's switch devices. Remove the unnecessary 2nd cell from the
switches reg property.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 .../boot/dts/marvell/armada-3720-turris-mox.dts      | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arc=
h/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 1cee26479bfe..98c9a3265446 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -303,7 +303,7 @@ phy1: ethernet-phy@1 {
 	/* switch nodes are enabled by U-Boot if modules are present */
 	switch0@10 {
 		compatible =3D "marvell,mv88e6190";
-		reg =3D <0x10 0>;
+		reg =3D <0x10>;
 		dsa,member =3D <0 0>;
 		interrupt-parent =3D <&moxtet>;
 		interrupts =3D <MOXTET_IRQ_PERIDOT(0)>;
@@ -428,7 +428,7 @@ port-sfp@a {
=20
 	switch0@2 {
 		compatible =3D "marvell,mv88e6085";
-		reg =3D <0x2 0>;
+		reg =3D <0x2>;
 		dsa,member =3D <0 0>;
 		interrupt-parent =3D <&moxtet>;
 		interrupts =3D <MOXTET_IRQ_TOPAZ>;
@@ -495,7 +495,7 @@ port@5 {
=20
 	switch1@11 {
 		compatible =3D "marvell,mv88e6190";
-		reg =3D <0x11 0>;
+		reg =3D <0x11>;
 		dsa,member =3D <0 1>;
 		interrupt-parent =3D <&moxtet>;
 		interrupts =3D <MOXTET_IRQ_PERIDOT(1)>;
@@ -620,7 +620,7 @@ port-sfp@a {
=20
 	switch1@2 {
 		compatible =3D "marvell,mv88e6085";
-		reg =3D <0x2 0>;
+		reg =3D <0x2>;
 		dsa,member =3D <0 1>;
 		interrupt-parent =3D <&moxtet>;
 		interrupts =3D <MOXTET_IRQ_TOPAZ>;
@@ -687,7 +687,7 @@ port@5 {
=20
 	switch2@12 {
 		compatible =3D "marvell,mv88e6190";
-		reg =3D <0x12 0>;
+		reg =3D <0x12>;
 		dsa,member =3D <0 2>;
 		interrupt-parent =3D <&moxtet>;
 		interrupts =3D <MOXTET_IRQ_PERIDOT(2)>;
@@ -803,7 +803,7 @@ port-sfp@a {
=20
 	switch2@2 {
 		compatible =3D "marvell,mv88e6085";
-		reg =3D <0x2 0>;
+		reg =3D <0x2>;
 		dsa,member =3D <0 2>;
 		interrupt-parent =3D <&moxtet>;
 		interrupts =3D <MOXTET_IRQ_TOPAZ>;
--=20
2.36.1