Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Mon, 16 May 2022 10:26:51 -0500
From:   Chris Morgan <macroalpha82@gmail.com>
To:     Peter Geis <pgwipeout@gmail.com>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>,
        Heiko Stuebner <heiko@sntech.de>, linux-clk@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 6/6] arm64: dts: rockchip: enable sfc controller on
 Quartz64 Model A
Message-ID: <20220516152651.GA18461@wintermute.localdomain>
References: <20220511150117.113070-1-pgwipeout@gmail.com>
 <20220511150117.113070-7-pgwipeout@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220511150117.113070-7-pgwipeout@gmail.com>
Precedence: bulk

On Wed, May 11, 2022 at 11:01:17AM -0400, Peter Geis wrote:
> Add the sfc controller binding for the Quartz64 Model A. This is not
> populated by default, so leave it disabled.
> 
> Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> ---
>  .../boot/dts/rockchip/rk3566-quartz64-a.dts      | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> index 71df64655de5..6ec349e7e521 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> @@ -603,6 +603,22 @@ &sdmmc1 {
>  	status = "okay";
>  };
>  
> +&sfc {
> +	pinctrl-0 = <&fspi_pins>;
> +	pinctrl-names = "default";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "disabled";
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-max-frequency = <24000000>;
> +		spi-rx-bus-width = <4>;
> +		spi-tx-bus-width = <1>;

This isn't really a concern, just a comment. Did you test this with the
spi-tx-bus-width of 4 by chance? While I did have to use 1 for my
implementation (the Odroid Go Advance) the Rockchip engineer I worked
with couldn't replicate the issue on his end and we ended up chalking
my issues up to an implementation specific problem. I'm only commenting
here because I don't want you to think that for this device the tx
always has to be 1, of course if your implementation does have issues
with a tx of 2 or 4 that's different...

Thank you.

> +	};
> +};
> +
>  /* spdif is exposed on con40 pin 18 */
>  &spdif {
>  	status = "okay";
> -- 
> 2.25.1
>