Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Robert Marko <robert.marko@sartura.hr>
To:     robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        andrew@lunn.ch, gregory.clement@bootlin.com,
        sebastian.hesselbarth@gmail.com, kostap@marvell.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
Cc:     Robert Marko <robert.marko@sartura.hr>,
        Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v4 07/10] arm64: dts: marvell: rename temp sensor nodes
Date:   Mon, 16 May 2022 14:48:25 +0200
Message-Id: <20220516124828.45144-7-robert.marko@sartura.hr>
In-Reply-To: <20220516124828.45144-1-robert.marko@sartura.hr>
References: <20220516124828.45144-1-robert.marko@sartura.hr>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Rename the temperature sensor nodes to use "temp-sensor" which matches
their device class instead of IC specific naming.

Remove the status = "okay" which is not required as its default anyway.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index b89c7455612d..f21a855fc608 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -152,14 +152,12 @@ &i2c1 {
 	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
-	nct375@48 {
-		status = "okay";
+	temp-sensor@48 {
 		compatible = "ti,tmp75c";
 		reg = <0x48>;
 	};
 
-	nct375@49 {
-		status = "okay";
+	temp-sensor@49 {
 		compatible = "ti,tmp75c";
 		reg = <0x49>;
 	};
-- 
2.36.1