Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 28 Nov 2001 18:55:25 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 28 Nov 2001 18:55:14 -0500 Received: from walden.phpwebhosting.com ([64.65.61.214]:19475 "HELO walden.phpwebhosting.com") by vger.kernel.org with SMTP id ; Wed, 28 Nov 2001 18:54:57 -0500 Message-Id: <5.1.0.14.0.20011128173852.00a28440@sunset.olemiss.edu> X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Wed, 28 Nov 2001 17:55:11 -0600 To: linux-kernel@vger.kernel.org From: Ben Pharr - Lists Subject: IDE SeekComplete Error Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I have been getting a DriveReady SeekComplete Error at bootup from my CD burner. Below are the excerpts from dmesg. I have a script that turns off DMA on the writer, but it hasn't been reached yet when this error occurs. This occurred on my first boot of 2.4.17-pre1, but I'm not positive it hasn't been happening with earlier kernels. I doesn't seem to be causing any problems. Ben Pharr Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALLlct15 20, ATA DISK drive hdc: SAMSUNG DVD-ROM SD-612, ATAPI CD/DVD-ROM drive hdd: SAMSUNG CD-R/RW SW-408B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63, UDMA(33) hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hda4 SCSI subsystem driver Revision: 1.00 hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdd: set_drive_speed_status: error=0x04 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: SAMSUNG Model: CD-R/RW SW-408B Rev: BS02 Type: CD-ROM ANSI SCSI revision: 02 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/