Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
Date:   Tue, 17 May 2022 12:43:26 +0200
From:   Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To:     Michal Simek <michal.simek@xilinx.com>
Cc:     Matthias Kaehlcke <mka@chromium.org>,
        Doug Anderson <dianders@chromium.org>,
        Alan Stern <stern@rowland.harvard.edu>,
        Rob Herring <robh+dt@kernel.org>,
        Frank Rowand <frowand.list@gmail.com>,
        Mathias Nyman <mathias.nyman@intel.com>,
        Felipe Balbi <balbi@kernel.org>,
        Linux USB List <linux-usb@vger.kernel.org>,
        Ravi Chandra Sadineni <ravisadineni@chromium.org>,
        Roger Quadros <rogerq@kernel.org>,
        LKML <linux-kernel@vger.kernel.org>,
        Bastien Nocera <hadess@hadess.net>,
        Stephen Boyd <swboyd@chromium.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Peter Chen <peter.chen@kernel.org>,
        Guo Zhengkui <guozhengkui@vivo.com>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Li Jun <jun.li@nxp.com>, Peter Chen <peter.chen@nxp.com>,
        Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Subject: Re: [PATCH v21 0/3] usb: misc: Add onboard_usb_hub driver
Message-ID: <YoN8Ti3xk4ElTiLP@kroah.com>
References: <20220217184254.4141705-1-mka@chromium.org>
 <CAD=FV=XswQj+L6rRuWH-PdoGp9vVsWKTwz1bFM_fagy55tKqEg@mail.gmail.com>
 <YmGetA6Huz4Sj/RL@google.com>
 <YmffM2XuCiOghOLU@kroah.com>
 <894ea48c-7962-320e-e177-9652701c72fe@xilinx.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <894ea48c-7962-320e-e177-9652701c72fe@xilinx.com>
Precedence: bulk

On Tue, May 17, 2022 at 12:36:03PM +0200, Michal Simek wrote:
> Hi Greg,
> 
> On 4/26/22 14:01, Greg Kroah-Hartman wrote:
> > On Thu, Apr 21, 2022 at 11:13:08AM -0700, Matthias Kaehlcke wrote:
> > > Hi,
> > > 
> > > On Thu, Apr 07, 2022 at 12:41:22PM -0700, Doug Anderson wrote:
> > > > Hi,
> > > > 
> > > > On Thu, Feb 17, 2022 at 10:43 AM Matthias Kaehlcke <mka@chromium.org> wrote:
> > > > > 
> > > > > This series adds:
> > > > > - the onboard_usb_hub_driver
> > > > > - glue in the generic HCD code to create and destroy the
> > > > >    onboard_usb_hub platform devices if needed
> > > > > - device tree changes that add RTS5411 entries for the QCA SC7180
> > > > >    based boards trogdor and lazor
> > > > > - a couple of stubs for platform device functions to avoid
> > > > >    unresolved symbols with certain kernel configs
> > > > > 
> > > > > The main issue the driver addresses is that a USB hub needs to be
> > > > > powered before it can be discovered. For discrete onboard hubs (an
> > > > > example for such a hub is the Realtek RTS5411) this is often solved
> > > > > by supplying the hub with an 'always-on' regulator, which is kind
> > > > > of a hack. Some onboard hubs may require further initialization
> > > > > steps, like changing the state of a GPIO or enabling a clock, which
> > > > > requires even more hacks. This driver creates a platform device
> > > > > representing the hub which performs the necessary initialization.
> > > > > Currently it only supports switching on a single regulator, support
> > > > > for multiple regulators or other actions can be added as needed.
> > > > > Different initialization sequences can be supported based on the
> > > > > compatible string.
> > > > > 
> > > > > Besides performing the initialization the driver can be configured
> > > > > to power the hub off during system suspend. This can help to extend
> > > > > battery life on battery powered devices which have no requirements
> > > > > to keep the hub powered during suspend. The driver can also be
> > > > > configured to leave the hub powered when a wakeup capable USB device
> > > > > is connected when suspending, and power it off otherwise.
> > > > > 
> > > > > Changes in v21:
> > > > > - dropped patch 'driver core: Export device_is_bound()'
> > > > > - refactored _find_onboard_hub()
> > > > > - removed 'onboard_hub_dev' symlinks from USB devices
> > > > > - dropped patch 'arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub'
> > > > >    (will be sent separately)
> > > > > - rebased series on v5.17-rc4
> > > > > 
> > > > > Changes in v20:
> > > > > - addressed review comments from Stephen
> > > > > - changed DT node names for hubs
> > > > > 
> > > > > Changes in v19:
> > > > > - added VID:PID pairs and compatible strings for RTS5414 hub
> > > > > - updated comments with RTS5411 USB versions to reflect those
> > > > >    reported/supported by the hub
> > > > > - rebased series on v5.16
> > > > > 
> > > > > Changes in v18:
> > > > > - introduced hidden Kconfig option to align module vs. builtin
> > > > >    choice with CONFIG_USB (thanks Doug!)
> > > > > - added patch 'driver core: Export device_is_bound()'
> > > > > - also adjust device tree of pompom rev1
> > > > > - dropped the following patches, which aren't needed anymore by this
> > > > >    series (though they might still be useful on their own):
> > > > >    - usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'
> > > > >    - arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM
> > > > >    - ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed
> > > > > 
> > > > > Changes in v17:
> > > > > - rebased on top of v5.16-rc1
> > > > > - moved creation of onboard_hub platform devices from xhci_platform
> > > > >    to the generic HCD code
> > > > > - addressed review comments for the onboard_hub driver
> > > > > - moved Kconfig/defconfig changes to the end of the series. The
> > > > >    onboard_hub driver doesn't depend on XHCI_PLATFORM anymore,
> > > > >    hence these changes aren't really required for the driver, but
> > > > >    they still seem to be a worthwhile improvement
> > > > > 
> > > > > Changes in v16:
> > > > > - added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM
> > > > >    where needed' to keep arm32 defconfigs effectively unchanged
> > > > > 
> > > > > Changes in v15:
> > > > > - adjusted dependencies of USB_DWC3_CORE to make sure it can only
> > > > >    be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET
> > > > >    or USB_DWC3_DUAL_ROLE is selectable
> > > > > 
> > > > > Changes in v14:
> > > > > - rebased on top of v5.14-rc1
> > > > > - dropped DT binding patch which landed in v5.13
> > > > > 
> > > > > Changes in v13:
> > > > > - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with
> > > > >    'depends on'" to the series to avoid Kconfig conflicts
> > > > > - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM"
> > > > >    to the series to keep effective defconfig unchanged
> > > > > 
> > > > > Changes in v12:
> > > > > - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE)
> > > > >    in onboard_hub.h to also check for the driver built as module
> > > > > - onboard_hub_driver: include onboard_hub.h again to make sure there
> > > > >    are prototype declarations for the public functions
> > > > > 
> > > > > Changes in v11:
> > > > > - support multiple onboard hubs connected to the same parent
> > > > > - don't include ‘onboard_hub.h’ from the onboard hub driver
> > > > > 
> > > > > Changes in v10:
> > > > > - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m
> > > > > - keep 'regulator-boot-on' property for pp3300_hub
> > > > > 
> > > > > Changes in v9:
> > > > > - added dependency on ONBOARD_USB_HUB (or !ONBOARD_USB_HUB) to
> > > > >    USB_PLATFORM_XHCI
> > > > > 
> > > > > Changes in v7:
> > > > > - updated DT binding
> > > > > - series rebased on qcom/arm64-for-5.13
> > > > > 
> > > > > Changes in v6:
> > > > > - updated summary
> > > > > 
> > > > > Changes in v5:
> > > > > - cover letter added
> > > > > 
> > > > > Matthias Kaehlcke (3):
> > > > >    of/platform: Add stubs for of_platform_device_create/destroy()
> > > > >    usb: misc: Add onboard_usb_hub driver
> > > > >    usb: core: hcd: Create platform devices for onboard hubs in probe()
> > > > > 
> > > > >   .../sysfs-bus-platform-onboard-usb-hub        |   8 +
> > > > >   MAINTAINERS                                   |   7 +
> > > > >   drivers/usb/core/hcd.c                        |   6 +
> > > > >   drivers/usb/misc/Kconfig                      |  23 +
> > > > >   drivers/usb/misc/Makefile                     |   1 +
> > > > >   drivers/usb/misc/onboard_usb_hub.c            | 510 ++++++++++++++++++
> > > > >   include/linux/of_platform.h                   |  22 +-
> > > > >   include/linux/usb/hcd.h                       |   1 +
> > > > >   include/linux/usb/onboard_hub.h               |  18 +
> > > > >   9 files changed, 592 insertions(+), 4 deletions(-)
> > > > >   create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
> > > > >   create mode 100644 drivers/usb/misc/onboard_usb_hub.c
> > > > >   create mode 100644 include/linux/usb/onboard_hub.h
> > > > 
> > > > With v5.18-rc1 out the door, I wonder if it's a good time to look at
> > > > this series again. Are there any hidden blockers that it's waiting
> > > > for?
> > > 
> > > Greg, please let me know if any further changes are needed or if this
> > > series can be landed.
> > 
> > After 21 different versions, there's nothing left for me to object to,
> > so I'll go queue it up.  Thanks for sticking with it.
> 
> I just checked linux-next and this series is still not there. Are you going
> to merge it or are you waiting for v22?

It was merged, and I had to revert it based on reports of problems with
it.  See the thread here:
	https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au
for details.

thanks,

greg k-h