Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
Date:   Wed, 18 May 2022 14:01:39 -0500
From:   Rob Herring <robh@kernel.org>
To:     Max Krummenacher <max.oss.09@gmail.com>
Cc:     max.krummenacher@toradex.com, Fabio Estevam <festevam@gmail.com>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>,
        NXP Linux Team <linux-imx@nxp.com>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 02/17] Revert "ARM: dts: imx6qdl-apalis: Avoid
 underscore in node name"
Message-ID: <20220518190139.GB3685644-robh@kernel.org>
References: <20220516115846.58328-1-max.oss.09@gmail.com>
 <20220516115846.58328-3-max.oss.09@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220516115846.58328-3-max.oss.09@gmail.com>
Precedence: bulk

On Mon, May 16, 2022 at 01:58:30PM +0200, Max Krummenacher wrote:
> From: Max Krummenacher <max.krummenacher@toradex.com>
> 
> The STMPE MFD device binding requires the child node to have a fixed
> name, i.e. with '_', not '-'. Otherwise the stmpe_adc, stmpe_touchscreen
> drivers will not be probed.
> 
> Fixes: 56086b5e804f ("ARM: dts: imx6qdl-apalis: Avoid underscore in node name")
> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
> ---
> 
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index bd763bae596b..da919d0544a8 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -315,7 +315,7 @@
>  		/* ADC conversion time: 80 clocks */
>  		st,sample-time = <4>;
>  
> -		stmpe_touchscreen: stmpe-touchscreen {
> +		stmpe_touchscreen: stmpe_touchscreen {

In any case, the correct name would have been 'touchscreen' and 'adc'.

>  			compatible = "st,stmpe-ts";
>  			/* 8 sample average control */
>  			st,ave-ctrl = <3>;
> @@ -332,7 +332,7 @@
>  			st,touch-det-delay = <5>;
>  		};
>  
> -		stmpe_adc: stmpe-adc {
> +		stmpe_adc: stmpe_adc {
>  			compatible = "st,stmpe-adc";
>  			/* forbid to use ADC channels 3-0 (touch) */
>  			st,norequest-mask = <0x0F>;
> -- 
> 2.20.1
>