Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates
 149.199.62.198 as permitted sender) receiver=protection.outlook.com;
 client-ip=149.199.62.198; helo=xsj-pvapexch01.xlnx.xilinx.com; pr=C
Envelope-to: bjorn.andersson@linaro.org,
 mathieu.poirier@linaro.org,
 robh+dt@kernel.org,
 krzk+dt@kernel.org,
 linux-remoteproc@vger.kernel.org,
 devicetree@vger.kernel.org,
 linux-kernel@vger.kernel.org,
 linux-arm-kernel@lists.infradead.org
From:   Tanmay Shah <tanmay.shah@xilinx.com>
To:     <bjorn.andersson@linaro.org>, <mathieu.poirier@linaro.org>,
        <robh+dt@kernel.org>, <krzk+dt@kernel.org>,
        <michal.simek@xilinx.com>
CC:     <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        Tanmay Shah <tanmay.shah@xilinx.com>
Subject: [PATCH v5 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
Date:   Wed, 18 May 2022 12:44:23 -0700
Message-ID: <20220518194426.3784095-2-tanmay.shah@xilinx.com>
In-Reply-To: <20220518194426.3784095-1-tanmay.shah@xilinx.com>
References: <20220518194426.3784095-1-tanmay.shah@xilinx.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 18 May 2022 19:46:24.7808
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 41cfe5bb-b343-4f56-dda5-08da39071788
X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.62.198];Helo=[xsj-pvapexch01.xlnx.xilinx.com]
X-MS-Exchange-CrossTenant-AuthSource: DM3NAM02FT035.eop-nam02.prod.protection.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: MN2PR02MB6000
X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,DKIM_SIGNED,
	DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,RDNS_NONE,
	SPF_HELO_NONE,T_SCC_BODY_TEXT_LINE autolearn=no autolearn_force=no
	version=3.4.6
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on
	lindbergh.monkeyblade.net
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem
(cluster).

Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
---

Changes in v5:
- Add constraints of the possible values of xlnx,cluster-mode property
- fix description of power-domains property for r5 core
- Remove reg, address-cells and size-cells properties as it is not required
- Fix description of mboxes property
- Add description of each memory-region and remove old .txt binding link
  reference in the description

Changes in v4:
  - Add memory-region, mboxes and mbox-names properties in example

Changes in v3:
  - None

 .../bindings/remoteproc/xlnx,r5f-rproc.yaml   | 128 ++++++++++++++++++
 include/dt-bindings/power/xlnx-zynqmp-power.h |   6 +
 2 files changed, 134 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
new file mode 100644
index 000000000000..f1c58ade1dd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx R5F processor subsystem
+
+maintainers:
+  - Ben Levinsky <ben.levinsky@xilinx.com>
+  - Tanmay Shah <tanmay.shah@xilinx.com>
+
+description: |
+  The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
+  real-time processing based on the Cortex-R5F processor core from ARM.
+  The Cortex-R5F processor implements the Arm v7-R architecture and includes a
+  floating-point unit that implements the Arm VFPv3 instruction set.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-r5fss
+
+  xlnx,cluster-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    description: |
+      The RPU MPCore can operate in split mode(Dual-processor performance), Safety
+      lock-step mode(Both RPU cores execute the same code in lock-step,
+      clock-for-clock) or Single CPU mode (RPU core 0 can be held in reset while
+      core 1 runs normally). The processor does not support dynamic configuration.
+      Switching between modes is only permitted immediately after a processor reset.
+      If set to  1 then lockstep mode and if 0 then split mode.
+      If set to  2 then single CPU mode. When not defined, default will be lockstep mode.
+
+patternProperties:
+  "^r5f-[a-f0-9]+$":
+    type: object
+    description: |
+      The RPU is located in the Low Power Domain of the Processor Subsystem.
+      Each processor includes separate L1 instruction and data caches and
+      tightly coupled memories (TCM). System memory is cacheable, but the TCM
+      memory space is non-cacheable.
+
+      Each RPU contains one 64KB memory and two 32KB memories that
+      are accessed via the TCM A and B port interfaces, for a total of 128KB
+      per processor. In lock-step mode, the processor has access to 256KB of
+      TCM memory.
+
+    properties:
+      compatible:
+        const: xlnx,zynqmp-r5f
+
+      power-domains:
+        description: RPU core PM domain specifier
+        maxItems: 1
+
+      mboxes:
+        items:
+          - description: mailbox channel to send data to RPU
+          - description: mailbox channel to receive data from RPU
+        minItems: 1
+
+      mbox-names:
+        items:
+          - const: tx
+          - const: rx
+        minItems: 1
+
+      sram:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        minItems: 1
+        description: |
+          phandles to one or more reserved on-chip SRAM regions. Other than TCM,
+          the RPU can execute instructions and access data from, the OCM memory,
+          the main DDR memory, and other system memories.
+
+          The regions should be defined as child nodes of the respective SRAM
+          node, and should be defined as per the generic bindings in,
+          Documentation/devicetree/bindings/sram/sram.yaml
+
+      memory-region:
+        description: |
+          List of phandles to the reserved memory regions associated with the
+          remoteproc device. This is variable and describes the memories shared with
+          the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
+          vrings, ...). This reserved memory region will be allocated on DDR memory.
+        minItems: 1
+        items:
+          - description: region used for RPU firmware image section
+          - description: vdev buffer
+          - description: vring0
+          - description: vring1
+        additionalItems: true
+
+    required:
+      - compatible
+      - power-domains
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    r5fss: r5fss {
+        compatible = "xlnx,zynqmp-r5fss";
+        xlnx,cluster-mode = <1>;
+
+        r5f-0 {
+            compatible = "xlnx,zynqmp-r5f";
+            power-domains = <&zynqmp_firmware 0x7>;
+            memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+            mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+            mbox-names = "tx", "rx";
+        };
+
+        r5f-1 {
+            compatible = "xlnx,zynqmp-r5f";
+            power-domains = <&zynqmp_firmware 0x8>;
+            memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+            mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+            mbox-names = "tx", "rx";
+        };
+    };
+...
diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
index 0d9a412fd5e0..618024cbb20d 100644
--- a/include/dt-bindings/power/xlnx-zynqmp-power.h
+++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
@@ -6,6 +6,12 @@
 #ifndef _DT_BINDINGS_ZYNQMP_POWER_H
 #define _DT_BINDINGS_ZYNQMP_POWER_H
 
+#define		PD_RPU_0	7
+#define		PD_RPU_1	8
+#define		PD_R5_0_ATCM	15
+#define		PD_R5_0_BTCM	16
+#define		PD_R5_1_ATCM	17
+#define		PD_R5_1_BTCM	18
 #define		PD_USB_0	22
 #define		PD_USB_1	23
 #define		PD_TTC_0	24
-- 
2.25.1