Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Stafford Horne <shorne@gmail.com>
To:     LKML <linux-kernel@vger.kernel.org>
Cc:     Openrisc <openrisc@lists.librecores.org>,
        Stafford Horne <shorne@gmail.com>,
        Jonas Bonn <jonas@southpole.se>,
        Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>,
        Randy Dunlap <rdunlap@infradead.org>
Subject: [PATCH v3 03/13] openrisc: Add support for liteuart emergency printing
Date:   Sat, 21 May 2022 22:13:13 +0900
Message-Id: <20220521131323.631209-4-shorne@gmail.com>
In-Reply-To: <20220521131323.631209-1-shorne@gmail.com>
References: <20220521131323.631209-1-shorne@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This patch adds support for sending emergency print output, such as
unhandled exception details, to a liteuart serial device.  This is the
default device available on litex platforms.

If a developer want to use this they should update UART_BASE_ADD
to the address of liteuart.

Signed-off-by: Stafford Horne <shorne@gmail.com>
---
 arch/openrisc/kernel/head.S | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S
index 7bfa6e4b60c5..21db50563f97 100644
--- a/arch/openrisc/kernel/head.S
+++ b/arch/openrisc/kernel/head.S
@@ -1555,7 +1555,18 @@ ENTRY(_emergency_putc)
 	l.movhi r4,hi(UART_BASE_ADD)
 	l.ori	r4,r4,lo(UART_BASE_ADD)
 
-#if defined(CONFIG_SERIAL_8250)
+#if defined(CONFIG_SERIAL_LITEUART)
+	/* Check OFF_TXFULL status */
+1:      l.lwz	r5,4(r4)
+	l.andi	r5,r5,0xff
+	l.sfnei	r5,0
+	l.bf	1b
+	 l.nop
+
+	/* Write character */
+	l.andi	r7,r7,0xff
+	l.sw	0(r4),r7
+#elif defined(CONFIG_SERIAL_8250)
 	/* Check UART LSR THRE (hold) bit */
 	l.addi  r6,r0,0x20
 1:      l.lbz   r5,5(r4)
-- 
2.31.1