Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Juerg Haefliger <juerg.haefliger@canonical.com>
To:     krzysztof.kozlowski@linaro.org, alim.akhtar@samsung.com,
        linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org
Cc:     linux-kernel@vger.kernel.org,
        Juerg Haefliger <juergh@canonical.com>
Subject: [PATCH 3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation
Date:   Mon, 23 May 2022 08:42:52 +0200
Message-Id: <20220523064252.11938-4-juergh@canonical.com>
In-Reply-To: <20220523064252.11938-1-juergh@canonical.com>
References: <20220523064252.11938-1-juergh@canonical.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
---
 arch/arm/mach-s3c/Kconfig.s3c64xx | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index af01675d8769..bbaa8ff3367b 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -99,7 +99,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
 config S3C64XX_SETUP_SPI
 	bool
 	help
-	 Common setup code for SPI GPIO configurations
+	  Common setup code for SPI GPIO configurations
 
 config S3C64XX_SETUP_USB_PHY
 	bool
@@ -109,7 +109,7 @@ config S3C64XX_SETUP_USB_PHY
 # S36400 Macchine support
 
 config MACH_SMDK6400
-       bool "SMDK6400"
+	bool "SMDK6400"
 	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
@@ -200,7 +200,7 @@ config SMDK6410_SD_CH0
 	bool "Use channel 0 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
+	  Select CON7 (channel 0) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -209,7 +209,7 @@ config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
+	  Select CON6 (channel 1) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -255,7 +255,7 @@ config MACH_NCP
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	help
-          Machine support for the Samsung NCP
+	  Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
@@ -287,21 +287,21 @@ config MACH_SMARTQ
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
 	help
-	    Shared machine support for SmartQ 5/7
+	  Shared machine support for SmartQ 5/7
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 5
+	  Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 7
+	  Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
-- 
2.32.0