Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
MIME-Version: 1.0
References: <20220519075117.1003520-1-tommaso.merciai@amarulasolutions.com> <20220519075117.1003520-5-tommaso.merciai@amarulasolutions.com>
In-Reply-To: <20220519075117.1003520-5-tommaso.merciai@amarulasolutions.com>
From:   Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Date:   Mon, 23 May 2022 10:16:36 +0200
Message-ID: <CAOf5uw=Wf0jM_rpY=eLs+phnwEH=5BxZdD-XoHTPdd9SFtGUsQ@mail.gmail.com>
Subject: Re: [PATCH 4/4] arm64: dts: rockchip: px30: use rk gpio naming
 convention into reset-gpios
To:     Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Cc:     linuxfancy@googlegroups.com, linux-amarula@amarulasolutions.com,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Heiko Stuebner <heiko@sntech.de>,
        Shunqian Zheng <zhengsq@rock-chips.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-media@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi

On Thu, May 19, 2022 at 9:51 AM Tommaso Merciai
<tommaso.merciai@amarulasolutions.com> wrote:
>
> Use rk gpio naming convention into reset-gpios of ov5695 camera
>
> Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> Tested-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> ---
>  arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
> index 0d05a1b098bc..07008d84434c 100644
> --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
> +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
> @@ -450,8 +450,8 @@ ov5695: ov5695@36 {
>                 dvdd-supply = <&vcc1v5_dvp>;
>                 dovdd-supply = <&vcc1v8_dvp>;
>                 pinctrl-names = "default";
> -               reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
>                 pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
> +               reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
>

Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>

>                 port {
>                         ucam_out: endpoint {
> --
> 2.25.1
>


-- 
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael@amarulasolutions.com
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info@amarulasolutions.com
www.amarulasolutions.com