Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
Date:   Mon, 23 May 2022 11:19:17 +0200
From:   Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To:     =?utf-8?B?5ZGo55Cw5p2wIChaaG91IFlhbmppZSk=?= 
        <zhouyanjie@wanyeetech.com>
Cc:     paul@crapouillou.net, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
        dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com,
        rick.tyliu@ingenic.com
Subject: Re: [PATCH 0/3] Refresh device tree and defconfig for Ingenic SoCs
 and boards.
Message-ID: <20220523091916.GF5069@alpha.franken.de>
References: <1652384021-46309-1-git-send-email-zhouyanjie@wanyeetech.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <1652384021-46309-1-git-send-email-zhouyanjie@wanyeetech.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Precedence: bulk

On Fri, May 13, 2022 at 03:33:38AM +0800, 周琰杰 (Zhou Yanjie) wrote:
> 1.Add PWM node for X1830 SoC from Ingenic.
> 2.Add SSI nodes for X1000 SoC and X1830 SoC from Ingenic.
> 3.Refresh SSI related nodes in CU1000-Neo and CU1830-Neo.
> 4.The X1830 SoC used by the CU1830-Neo and the X1000 SoC
>   used by the CU1000-Neo are both single-core processors,
>   therefore the "OST_CLK_PERCPU_TIMER" ABI should not be
>   used in the OST nodes of the CU1830-Neo and CU1000-Neo,
>   it is just a coincidence that there is no problem now.
>   So replace the misused "OST_CLK_PERCPU_TIMER" ABI with
>   the correct "OST_CLK_EVENT_TIMER" ABI.
> 5.Refresh the defconfig files of the CU1000-Neo board and
>   the CU1830-Neo board, remove the selection of SPI-GPIO,
>   and add the selection of SSI.
> 
> 周琰杰 (Zhou Yanjie) (3):
>   MIPS: Ingenic: Add PWM nodes for X1830.
>   MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
>   MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
> 
>  arch/mips/boot/dts/ingenic/cu1000-neo.dts | 77 ++++++++++++++++---------------
>  arch/mips/boot/dts/ingenic/cu1830-neo.dts | 76 +++++++++++++++---------------
>  arch/mips/boot/dts/ingenic/x1000.dtsi     | 20 ++++++++
>  arch/mips/boot/dts/ingenic/x1830.dtsi     | 53 +++++++++++++++++++++
>  arch/mips/configs/cu1000-neo_defconfig    |  2 +-
>  arch/mips/configs/cu1830-neo_defconfig    |  2 +-
>  6 files changed, 154 insertions(+), 76 deletions(-)
> 
> -- 
> 2.7.4

seried applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]