Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
Date:   Mon, 23 May 2022 19:24:08 +0300
From:   Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To:     Henning Schild <henning.schild@siemens.com>
Cc:     Mark Gross <markgross@kernel.org>,
        Wim Van Sebroeck <wim@linux-watchdog.org>,
        Guenter Roeck <linux@roeck-us.net>,
        linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
        platform-driver-x86@vger.kernel.org,
        linux-watchdog@vger.kernel.org, Enrico Weigelt <lkml@metux.net>,
        Gerd Haeussler <gerd.haeussler.ext@siemens.com>
Subject: Re: [PATCH v3 0/4] simatic-ipc additions to p2sb apl lake gpio
Message-ID: <You1KI78zbXmApm+@smile.fi.intel.com>
References: <20220513083652.974-1-henning.schild@siemens.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220513083652.974-1-henning.schild@siemens.com>
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
Precedence: bulk

On Fri, May 13, 2022 at 10:36:48AM +0200, Henning Schild wrote:
> changed since v2:
>  - put GPIO led module under same config switch
>  - some style changes from review
>  - init gpios with gpiod_get_index and drop gpiod_set_value
>  - drop bogus "if" from watchdog Kconfig
> 
> changed since v1:
>  - rebased
>  - split p1 into p1-3
> 
> This switches the simatic-ipc modules to using the upcoming p2sb 
> interface introduced by Andy with 
> "platform/x86: introduce p2sb_bar() helper".
> The series relies on these p2sb changes already applied and Andy will
> likely take them into his series at some point.
> 
> It also switches to one apollo lake device to using gpio leds.

Hmm... This series misses LEDS maintainer. Okay, I will include them when
sending v6 after v5.19-rc1.

-- 
With Best Regards,
Andy Shevchenko