Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Markuss Broks <markuss.broks@gmail.com>
To:     linux-kernel@vger.kernel.org, jic23@kernel.org
Cc:     ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        Markuss Broks <markuss.broks@gmail.com>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Marijn Suijten <marijn.suijten@somainline.org>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@somainline.org>,
        Song Qiang <songqiang1304521@gmail.com>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>, linux-iio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: [PATCH 4/5] proximity: vl53l0x: Handle the reset GPIO
Date:   Mon, 23 May 2022 20:53:43 +0300
Message-Id: <20220523175344.5845-5-markuss.broks@gmail.com>
In-Reply-To: <20220523175344.5845-1-markuss.broks@gmail.com>
References: <20220523175344.5845-1-markuss.broks@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Handle the GPIO connected to the XSHUT/RST_N pin of VL53L0X.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
 drivers/iio/proximity/vl53l0x-i2c.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/iio/proximity/vl53l0x-i2c.c b/drivers/iio/proximity/vl53l0x-i2c.c
index 8581a873919f..36c48a824725 100644
--- a/drivers/iio/proximity/vl53l0x-i2c.c
+++ b/drivers/iio/proximity/vl53l0x-i2c.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -44,6 +45,7 @@ struct vl53l0x_data {
 	struct i2c_client *client;
 	struct completion completion;
 	struct regulator *vdd_supply;
+	struct gpio_desc *reset_gpio;
 };
 
 static irqreturn_t vl53l0x_handle_irq(int irq, void *priv)
@@ -197,6 +199,8 @@ static void vl53l0x_power_off(void *_data)
 {
 	struct vl53l0x_data *data = _data;
 
+	gpiod_set_value_cansleep(data->reset_gpio, 1);
+
 	regulator_disable(data->vdd_supply);
 }
 
@@ -208,6 +212,8 @@ static int vl53l0x_power_on(struct vl53l0x_data *data)
 	if (ret)
 		return ret;
 
+	gpiod_set_value_cansleep(data->reset_gpio, 0);
+
 	usleep_range(3200, 5000);
 
 	return 0;
@@ -237,6 +243,11 @@ static int vl53l0x_probe(struct i2c_client *client)
 		return dev_err_probe(&client->dev, PTR_ERR(data->vdd_supply),
 				     "Unable to get VDD regulator\n");
 
+	data->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->reset_gpio))
+		return dev_err_probe(&client->dev, PTR_ERR(data->reset_gpio),
+				     "Cannot get reset GPIO\n");
+
 	error = vl53l0x_power_on(data);
 	if (error)
 		return dev_err_probe(&client->dev, error,
-- 
2.36.1