Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Juerg Haefliger <juerg.haefliger@canonical.com>
To:     richard@nod.at, anton.ivanov@cambridgegreys.com,
        johannes@sipsolutions.net, linux-um@lists.infradead.org
Cc:     linux-kernel@vger.kernel.org,
        Juerg Haefliger <juerg.haefliger@canonical.com>
Subject: [PATCH 2/2] um/drivers: Kconfig: Fix indentation
Date:   Wed, 25 May 2022 14:50:01 +0200
Message-Id: <20220525125001.47009-3-juerg.haefliger@canonical.com>
In-Reply-To: <20220525125001.47009-1-juerg.haefliger@canonical.com>
References: <20220525125001.47009-1-juerg.haefliger@canonical.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
---
 arch/um/drivers/Kconfig | 54 ++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig
index f145842c40b9..27e09e421d50 100644
--- a/arch/um/drivers/Kconfig
+++ b/arch/um/drivers/Kconfig
@@ -236,37 +236,37 @@ config UML_NET_VECTOR
 	depends on UML_NET
 	select MAY_HAVE_RUNTIME_DEPS
 	help
-	This User-Mode Linux network driver uses multi-message send
-	and receive functions. The host running the UML guest must have
-	a linux kernel version above 3.0 and a libc version > 2.13.
-	This driver provides tap, raw, gre and l2tpv3 network transports
-	with up to 4 times higher network throughput than the UML network
-	drivers.
+	  This User-Mode Linux network driver uses multi-message send
+	  and receive functions. The host running the UML guest must have
+	  a linux kernel version above 3.0 and a libc version > 2.13.
+	  This driver provides tap, raw, gre and l2tpv3 network transports
+	  with up to 4 times higher network throughput than the UML network
+	  drivers.
 
 config UML_NET_VDE
 	bool "VDE transport (obsolete)"
 	depends on UML_NET
 	select MAY_HAVE_RUNTIME_DEPS
 	help
-	This User-Mode Linux network transport allows one or more running
-	UMLs on a single host to communicate with each other and also
-	with the rest of the world using Virtual Distributed Ethernet,
-	an improved fork of uml_switch.
+	  This User-Mode Linux network transport allows one or more running
+	  UMLs on a single host to communicate with each other and also
+	  with the rest of the world using Virtual Distributed Ethernet,
+	  an improved fork of uml_switch.
 
-	You must have libvdeplug installed in order to build the vde
-	transport into UML.
+	  You must have libvdeplug installed in order to build the vde
+	  transport into UML.
 
-	To use this form of networking, you will need to run vde_switch
-	on the host.
+	  To use this form of networking, you will need to run vde_switch
+	  on the host.
 
-	For more information, see <http://wiki.virtualsquare.org/>
-	That site has a good overview of what VDE is and also examples
-	of the UML command line to use to enable VDE networking.
+	  For more information, see <http://wiki.virtualsquare.org/>
+	  That site has a good overview of what VDE is and also examples
+	  of the UML command line to use to enable VDE networking.
 
-	NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
-	migrate to UML_NET_VECTOR.
+	  NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+	  migrate to UML_NET_VECTOR.
 
-	If unsure, say N.
+	  If unsure, say N.
 
 config UML_NET_MCAST
 	bool "Multicast transport (obsolete)"
@@ -296,19 +296,19 @@ config UML_NET_PCAP
 	depends on UML_NET
 	select MAY_HAVE_RUNTIME_DEPS
 	help
-	The pcap transport makes a pcap packet stream on the host look
-	like an ethernet device inside UML.  This is useful for making
-	UML act as a network monitor for the host.  You must have libcap
-	installed in order to build the pcap transport into UML.
+	  The pcap transport makes a pcap packet stream on the host look
+	  like an ethernet device inside UML.  This is useful for making
+	  UML act as a network monitor for the host.  You must have libcap
+	  installed in order to build the pcap transport into UML.
 
 	  For more information, see
 	  <http://user-mode-linux.sourceforge.net/old/networking.html>  That site
 	  has examples of the UML command line to use to enable this option.
 
-	NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
-	migrate to UML_NET_VECTOR.
+	  NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please
+	  migrate to UML_NET_VECTOR.
 
-	If unsure, say N.
+	  If unsure, say N.
 
 config UML_NET_SLIRP
 	bool "SLiRP transport (obsolete)"
-- 
2.32.0