Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Marco Felsch <m.felsch@pengutronix.de>
To:     p.zabel@pengutronix.de, robh+dt@kernel.org, krzk+dt@kernel.org
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        kernel@pengutronix.de, Marco Felsch <m.felsch@pengutronix.de>
Subject: [PATCH v2 1/2] dt-bindings: reset: Add TPS380x documentation
Date:   Mon, 30 May 2022 11:22:25 +0200
Message-Id: <20220530092226.748644-1-m.felsch@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add device-tree binding documentation for the tps380x reset driver. The
binding uses enum to make it easy to add more devices from that family.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changelog:
v2:
- added Krzysztof rb

 .../bindings/reset/ti,tps380x-reset.yaml      | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml

diff --git a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
new file mode 100644
index 000000000000..afc835eda0ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS380x reset controller node bindings
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |
+  The TPS380x family [1] of supervisory circuits monitor supply voltages to
+  provide circuit initialization and timing supervision. The devices assert a
+  RESET signal if the voltage drops below a preset threshold or upon a manual
+  reset input (MR). The RESET output remains asserted for the factory
+  programmed delay after the voltage return above its threshold or after the
+  manual reset input is released.
+
+  [1] https://www.ti.com/product/TPS3801
+
+properties:
+  compatible:
+    enum:
+      - ti,tps3801
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the MR pin.
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reset-gpios
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    reset: reset-controller {
+        compatible = "ti,tps3801";
+        #reset-cells = <0>;
+        reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+    };
+...
-- 
2.30.2