Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rahul T R <r-ravikumar@ti.com>
To:     <robh+dt@kernel.org>, <nm@ti.com>, <vigneshr@ti.com>,
        <kishon@ti.com>, <krzysztof.kozlowski+dt@linaro.org>
CC:     <lee.jones@linaro.org>, <rogerq@kernel.org>,
        <devicetree@vger.kernel.org>, <kristo@kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <s-anna@ti.com>,
        Rahul T R <r-ravikumar@ti.com>
Subject: [PATCH v4 0/3] Enable RPi header on j721e sk
Date:   Mon, 30 May 2022 15:40:28 +0530
Message-ID: <20220530101031.11357-1-r-ravikumar@ti.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

The following series of patches enables RPi header
on j721e sk. It is a 40 pin io expasion header which
brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v4:
   - Correct the node name in dt binding example

v3:
   - Change node name from clock to clock-controller
   - Add correct description for clock-controller node

v2:
   - Add full path for clock property $ref
   - Remove the discription for clock pattern property,
     since $ref is added
   - Remove the label in the example
   - Fix the indentation in the example

Rahul T R (1):
  dt-bindings: mfd: ti,j721e-system-controller: Add clock property

Sinthu Raja (1):
  arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

Vijay Pothukuchi (1):
  arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs

 .../mfd/ti,j721e-system-controller.yaml       |  12 +++
 .../dts/ti/k3-j721e-common-proc-board.dts     |  24 +++++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  62 ++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 101 +++++++++++++++++-
 4 files changed, 193 insertions(+), 6 deletions(-)

-- 
2.17.1