Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Siddharth Vadapalli <s-vadapalli@ti.com>
To:     <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
        <pabeni@redhat.com>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <linux@armlinux.org.uk>,
        <vladimir.oltean@nxp.com>, <grygorii.strashko@ti.com>,
        <vigneshr@ti.com>, <nsekhar@ti.com>
CC:     <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <kishon@ti.com>,
        Siddharth Vadapalli <s-vadapalli@ti.com>
Subject: [PATCH v2 3/3] net: ethernet: ti: am65-cpsw: Move phy_set_mode_ext() to correct location
Date:   Thu, 2 Jun 2022 17:15:58 +0530
Message-ID: <20220602114558.6204-4-s-vadapalli@ti.com>
In-Reply-To: <20220602114558.6204-1-s-vadapalli@ti.com>
References: <20220602114558.6204-1-s-vadapalli@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

In TI's J7200 SoC CPSW5G ports, each of the 4 ports can be configured
as a QSGMII main or QSGMII-SUB port. This configuration is performed
by phy-gmii-sel driver on invoking the phy_set_mode_ext() function.

It is necessary for the QSGMII main port to be configured before any of
the QSGMII-SUB interfaces are brought up. Currently, the QSGMII-SUB
interfaces come up before the QSGMII main port is configured.

Fix this by moving the call to phy_set_mode_ext() from
am65_cpsw_nuss_ndo_slave_open() to am65_cpsw_nuss_init_slave_ports(),
thereby ensuring that the QSGMII main port is configured before any of
the QSGMII-SUB ports are brought up.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 8a8dabf824f1..877880ec5f5b 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -593,11 +593,6 @@ static int am65_cpsw_nuss_ndo_slave_open(struct net_device *ndev)
 	/* mac_sl should be configured via phy-link interface */
 	am65_cpsw_sl_ctl_reset(port);
 
-	ret = phy_set_mode_ext(port->slave.ifphy, PHY_MODE_ETHERNET,
-			       port->slave.phy_if);
-	if (ret)
-		goto error_cleanup;
-
 	ret = phylink_of_phy_connect(port->slave.phylink, port->slave.phy_node, 0);
 	if (ret)
 		goto error_cleanup;
@@ -1897,6 +1892,10 @@ static int am65_cpsw_nuss_init_slave_ports(struct am65_cpsw_common *common)
 			goto of_node_put;
 		}
 
+		ret = phy_set_mode_ext(port->slave.ifphy, PHY_MODE_ETHERNET, port->slave.phy_if);
+		if (ret)
+			goto of_node_put;
+
 		ret = of_get_mac_address(port_np, port->slave.mac_addr);
 		if (ret) {
 			am65_cpsw_am654_get_efuse_macid(port_np,
-- 
2.36.1