Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   =?UTF-8?q?Pawe=C5=82=20Anikiel?= <pan@semihalf.com>
To:     robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        dinguyen@kernel.org
Cc:     linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, amstan@chromium.org,
        upstream@semihalf.com,
        =?UTF-8?q?Pawe=C5=82=20Anikiel?= <pan@semihalf.com>
Subject: [PATCH v3 1/5] ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi
Date:   Fri,  3 Jun 2022 08:58:12 +0200
Message-Id: <20220603065816.87952-2-pan@semihalf.com>
In-Reply-To: <20220603065816.87952-1-pan@semihalf.com>
References: <20220603065816.87952-1-pan@semihalf.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

The Mercury+ AA1 is not a standalone board, rather it's a module
with an Arria 10 SoC. Remove status = "okay" and i2c aliases, as they
are routed to the base board and should be enabled from there.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
---
 arch/arm/boot/dts/Makefile                    |  1 -
 ...1.dts => socfpga_arria10_mercury_aa1.dtsi} | 28 -------------------
 2 files changed, 29 deletions(-)
 rename arch/arm/boot/dts/{socfpga_arria10_mercury_aa1.dts => socfpga_arria10_mercury_aa1.dtsi} (84%)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index edfbedaa6168..023c8b4ba45c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1146,7 +1146,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_mercury_aa1.dtb \
 	socfpga_arria10_socdk_nand.dtb \
 	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
similarity index 84%
rename from arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
rename to arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
index a75c059b6727..4b21351f2694 100644
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
 
 #include "socfpga_arria10.dtsi"
 
@@ -11,8 +10,6 @@ / {
 	aliases {
 		ethernet0 = &gmac0;
 		serial1 = &uart1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
 	};
 
 	memory@0 {
@@ -43,7 +40,6 @@ &gmac0 {
 	phy-addr = <0xffffffff>; /* probe for phy addr */
 
 	max-frame-size = <3800>;
-	status = "okay";
 
 	phy-handle = <&phy3>;
 
@@ -69,22 +65,8 @@ phy3: ethernet-phy@3 {
 	};
 };
 
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
 &i2c1 {
-	status = "okay";
 	isl12022: isl12022@6f {
-		status = "okay";
 		compatible = "isil,isl12022";
 		reg = <0x6f>;
 	};
@@ -92,7 +74,6 @@ isl12022: isl12022@6f {
 
 /* Following mappings are taken from arria10 socdk dts */
 &mmc {
-	status = "okay";
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
@@ -101,12 +82,3 @@ &mmc {
 &osc1 {
 	clock-frequency = <33330000>;
 };
-
-&uart1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-- 
2.36.1.255.ge46751e96f-goog