Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Luca Weiss <luca.weiss@fairphone.com>
To:     linux-arm-msm@vger.kernel.org
Cc:     ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        Luca Weiss <luca.weiss@fairphone.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: qcom: sm8250: use constants for audio clocks
Date:   Fri,  3 Jun 2022 11:47:10 +0200
Message-Id: <20220603094710.64591-2-luca.weiss@fairphone.com>
In-Reply-To: <20220603094710.64591-1-luca.weiss@fairphone.com>
References: <20220603094710.64591-1-luca.weiss@fairphone.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The use of these constants was removed during merging, probably because
the patches adding those defines and the dts patches were merged through
different trees.

Re-add them to make it clear which clocks are getting used.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index dc2562070336..fb7a82c3704f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -8,6 +8,8 @@
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
+#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -2188,11 +2190,11 @@ tcsr_mutex: hwlock@1f40000 {
 		wsamacro: codec@3240000 {
 			compatible = "qcom,sm8250-lpass-wsa-macro";
 			reg = <0 0x03240000 0 0x1000>;
-			clocks = <&audiocc 1>,
-				 <&audiocc 0>,
+			clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
+				 <&audiocc LPASS_CDC_WSA_NPL>,
 				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-				 <&aoncc 0>,
+				 <&aoncc LPASS_CDC_VA_MCLK>,
 				 <&vamacro>;
 
 			clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
@@ -2239,7 +2241,7 @@ audiocc: clock-controller@3300000 {
 		vamacro: codec@3370000 {
 			compatible = "qcom,sm8250-lpass-va-macro";
 			reg = <0 0x03370000 0 0x1000>;
-			clocks = <&aoncc 0>,
+			clocks = <&aoncc LPASS_CDC_VA_MCLK>,
 				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 
-- 
2.36.1