Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1763225AbXERTRA (ORCPT ); Fri, 18 May 2007 15:17:00 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755219AbXERTQx (ORCPT ); Fri, 18 May 2007 15:16:53 -0400 Received: from ik-out-1112.google.com ([66.249.90.178]:52732 "EHLO ik-out-1112.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752893AbXERTQu convert rfc822-to-8bit (ORCPT ); Fri, 18 May 2007 15:16:50 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:date:from:to:cc:subject:message-id:references:mime-version:content-type:content-disposition:content-transfer-encoding:in-reply-to:user-agent; b=mt6EVomv1viuGOSOcuUw5hC8yJg4razT4ICSgM2c+P08Cr6C1lyFYOelGlXUDiRaR5CKHCJRqbh2hksU5u1gegnN8Q5AbzB8iz1F6ngmJjHYzmNcNxNan6ObZZg8mOpiUb7nkDu9TgVw83b2Yh4ihkGJ487yu+fEs+sXEl4bGcM= Date: Fri, 18 May 2007 21:16:45 +0200 From: Luca Tettamanti To: Herbert Xu Cc: linux-kernel@vger.kernel.org, Andrew Morton Subject: Re: 2.6.21-mm1 and now 2.6.21-git: SLUB Crashes on boot - crypto? Message-ID: <20070518191645.GA10815@dreamland.darkstar.lan> References: <20070514173823.GA7137@dreamland.darkstar.lan> <20070515014344.GA8850@gondor.apana.org.au> <20070515185212.GA18783@dreamland.darkstar.lan> <20070518031931.GA13048@gondor.apana.org.au> <68676e00705180509s64b737e2k37c5b2e713c96932@mail.gmail.com> <20070518131455.GA20918@gondor.apana.org.au> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF8 Content-Disposition: inline Content-Transfer-Encoding: 8BIT In-Reply-To: <20070518131455.GA20918@gondor.apana.org.au> User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 41604 Lines: 837 Il Fri, May 18, 2007 at 11:14:55PM +1000, Herbert Xu ha scritto: > On Fri, May 18, 2007 at 02:09:54PM +0200, Luca wrote: > > > > Well, pretty sure. The OOPS says 2.6.22-rc1-libata-g705962cc-dirty, > > git agrees and I've done a full rebuild. The .config is generated > > using 'make oldconfig' using the 2.6.21 as baseline, maybe ALGAPI is > > coming from there? > > Sorry, my mistake. That bug only happens if you have padlock turned on. > > Anyway, if possible could you post the complete dmesg when it crashes? > I'd like to see what has happened up to the point where it crashes. Output from serial console is enlightening (sort of...): Loading IPsec SA/SP database from /etc/ipsec-tools.conf: BUG: unable to handle kernel paging request at virtual address 6b6b6ceb printing eip: b0141aef [oops] Problem is that: - /etc/ipsec-tools.conf is empty (everything is commented out), it's a leftover of previous experiments. - AH and ESP are disabled in the kernel since I don't use them anymore. Removing setkey script from init.d makes the OOPS disappear though; nothing happens if I manually run setkey after the boot... This is the full log: Linux version 2.6.22-rc1-libata-g705962cc-dirty (kronos@dreamland.darkstar.lan) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #63 SMP PREEMPT Thu May 17 00:22:29 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 (usable) BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff90000 (usable) BIOS-e820: 000000003ff90000 - 000000003ff9e000 (ACPI data) BIOS-e820: 000000003ff9e000 - 000000003ffe0000 (ACPI NVS) BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1023MB LOWMEM available. found SMP MP-table at 000ff780 Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 262032 early_node_map[1] active PFN ranges 0: 0 -> 262032 DMI 2.4 present. ACPI: RSDP 000FA980, 0024 (r2 ACPIAM) ACPI: XSDT 3FF90100, 0054 (r1 KOZIRO FRONTIER 12000611 MSFT 97) ACPI: FACP 3FF90290, 00F4 (r3 MSTEST OEMFACP 12000611 MSFT 97) ACPI: DSDT 3FF905C0, 8F8C (r1 A0637 A0637000 0 INTL 20060113) ACPI: FACS 3FF9E000, 0040 ACPI: APIC 3FF90390, 006C (r1 MSTEST OEMAPIC 12000611 MSFT 97) ACPI: MCFG 3FF90400, 003C (r1 MSTEST OEMMCFG 12000611 MSFT 97) ACPI: SLIC 3FF90440, 0176 (r1 KOZIRO FRONTIER 12000611 MSFT 97) ACPI: OEMB 3FF9E040, 007B (r1 MSTEST AMI_OEM 12000611 MSFT 97) ACPI: HPET 3FF99550, 0038 (r1 MSTEST OEMHPET 12000611 MSFT 97) ACPI: PM-Timer IO Port: 0x808 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a202 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) Built 1 zonelists. Total pages: 259985 Kernel command line: BOOT_IMAGE=linux-2.6.22r1 ro video=radeonfb:1024x768-8@60 lapic apic=verbose root=/dev/mapper/mainVol-root console=tty0 console=ttyS0,57600n8 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=b042e000 soft=b042c000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2135.141 MHz processor. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 992 kB per task-struct memory footprint: 1200 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1029676k/1048128k available (2016k kernel code, 17880k reserved, 981k data, 212k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB) vmalloc : 0xf0800000 - 0xfffb5000 ( 247 MB) lowmem : 0xb0000000 - 0xeff90000 (1023 MB) .init : 0xb03f2000 - 0xb0427000 ( 212 kB) .data : 0xb02f8234 - 0xb03ed894 ( 981 kB) .text : 0xb0100000 - 0xb02f8234 (2016 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 4273.69 BogoMIPS (lpj=8547386) Mount-cache hash table entries: 512 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. lockdep: not fixing up alternatives. ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 1008 Objects with 75 Devices 286 Methods 36 Regions tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [02] enable : Transition to ACPI mode successful CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 enabled ExtINT on CPU#0 lockdep: not fixing up alternatives. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=b042f000 soft=b042d000 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. 4270.07 BogoMIPS (lpj=8540143) monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 Total of 2 processors activated (8543.76 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1667977 ... PM timer delta = 357950 ... PM timer result ok ..... delta 1667977 ..... mult: 71634589 ..... calibration result: 1067505 ..... CPU clock speed is 2135.0049 MHz. ..... host bus clock speed is 266.3505 MHz. checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=36 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 2 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:..................................................................................................................................................................................................................................... Initialized 35/36 Regions 44/44 Fields 51/51 Buffers 99/100 Packages (1017 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 1 _STA executions (examined 81 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Firmware left 0000:05:01.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 17 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report testing the IO APIC....................... .................................... done. ACPI: RTC can wake from S4 pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved pnp: 00:08: ioport range 0x290-0x297 has been reserved pnp: 00:09: iomem range 0xffafe000-0xffb0cbff could not be reserved pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved pnp: 00:0f: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved pnp: 00:10: iomem range 0xc0000-0xcffff could not be reserved pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:10: iomem range 0x100000-0x3fffffff could not be reserved Time: tsc clocksource has been installed. Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 PCI: Bridge: 0000:00:01.0 IO window: 7000-9fff MEM window: ff200000-ff2fffff PREFETCH window: bfd00000-dfcfffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: dfd00000-dfdfffff PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: ff400000-ff4fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: a000-afff MEM window: ff300000-ff3fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: b000-cfff MEM window: ff500000-ff9fffff PREFETCH window: dfe00000-dfefffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 65536 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2814k freed Machine check exception polling timer started. Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability radeonfb_pci_register BEGIN ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb (0000:01:00.0): Found 131072k of DDR 256 bits wide videoram radeonfb (0000:01:00.0): mapped 16384k videoram radeonfb: Found Intel x86 BIOS ROM Image Retrieved PLL infos from ATOM BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=540.00 Mhz, System=520.00 MHz PLL min 20000 max 50000 TMDS PLL from BIOS: 16500 b011c index 3 port 2 conn 2 dac -1 ddc 0 tmds 0 index 4 port 2 conn 2 dac 1 ddc 0 tmds -1 index 7 port 1 conn 2 dac -1 ddc 1 tmds 1 Starting monitor auto detection... i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. radeonfb: I2C (port 1) ... not found radeonfb: I2C (port 0) ... found CRT display * Connector 1 is DVI-I. Head -1, Monitor: None ddc port: 1, dac: -1, tmds: 1 * Connector 2 is DVI-I. Head 0, Monitor: CRT (EDID probed) ddc port: 0, dac: 1, tmds: 0 hStart = 1048, hEnd = 1184, hTotal = 1344 vStart = 771, vEnd = 777, vTotal = 806 h_total_disp = 0x7f00a7 hsync_strt_wid = 0x910422 v_total_disp = 0x2ff0325 vsync_strt_wid = 0x860302 pixclock = 15384 freq = 6500 freq = 6500, PLL min = 20000, PLL max = 50000 ref_div = 12, ref_clk = 2700, output_freq = 26000 ref_div = 12, ref_clk = 2700, output_freq = 26000 post div = 0x2 fb_div = 0x74 ppll_div_3 = 0x20074 Console: switching to colour frame buffer device 128x48 radeonfb (0000:01:00.0): ATI Radeon ]R radeonfb_pci_register END ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFF0 [20070126] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded netconsole: not configured, aborting ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 cmd 0xf080c900 ctl 0x00000000 bmdma 0x00000000 irq 0 ata2: SATA max UDMA/133 cmd 0xf080c980 ctl 0x00000000 bmdma 0x00000000 irq 0 ata3: SATA max UDMA/133 cmd 0xf080ca00 ctl 0x00000000 bmdma 0x00000000 irq 0 ata4: SATA max UDMA/133 cmd 0xf080ca80 ctl 0x00000000 bmdma 0x00000000 irq 0 ata5: SATA max UDMA/133 cmd 0xf080cb00 ctl 0x00000000 bmdma 0x00000000 irq 0 ata6: SATA max UDMA/133 cmd 0xf080cb80 ctl 0x00000000 bmdma 0x00000000 irq 0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 ata1.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133 ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: [LDM] sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part scsi6 : ahci scsi7 : ahci ata7: SATA max UDMA/133 cmd 0xf081c100 ctl 0x00000000 bmdma 0x00000000 irq 0 ata8: SATA max UDMA/133 cmd 0xf081c180 ctl 0x00000000 bmdma 0x00000000 irq 0 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) PCI: Enabling device 0000:02:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 18 scsi8 : pata_jmicron scsi9 : pata_jmicron ata9: PATA max UDMA/100 cmd 0x0001ac00 ctl 0x0001a882 bmdma 0x0001a400 irq 0 ata10: PATA max UDMA/100 cmd 0x0001a800 ctl 0x0001a482 bmdma 0x0001a408 irq 0 ata9.00: ATAPI, max UDMA/33 ata9.01: ATAPI, max UDMA/33 ata9.00: configured for UDMA/33 ata9.01: configured for UDMA/33 ATA: abnormal status 0x7F on port 0x0001a807 scsi 8:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 78x/78x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 8:0:0:0: Attached scsi generic sg1 type 5 scsi 8:0:1:0: CD-ROM WAITEC ALADAR/1 B1.5 PQ: 0 ANSI: 5 sr1: scsi3-mmc drive: 16x/40x writer cd/rw xa/form2 cdda tray sr 8:0:1:0: Attached scsi generic sg2 type 5 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode Freeing unused kernel memory: 212k freed Write protecting the kernel read-only data: 778k Loading, please wait... Begin: Loading essential drivers... ... SGI XFS with ACLs, large block numbers, no debug enabled sata_uli 0000:05:02.0: version 1.1 ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) -> IRQ 19 scsi10 : sata_uli scsi11 : sata_uli ata11: SATA max UDMA/133 cmd 0x0001c000 ctl 0x0001bc02 bmdma 0x0001b480 irq 0 ata12: SATA max UDMA/133 cmd 0x0001b880 ctl 0x0001b802 bmdma 0x0001b488 irq 0 ata11: SATA link down (SStatus 0 SControl 310) input: ImPS/2 Generic Wheel Mouse as /class/input/input1 ata12: SATA link down (SStatus 0 SControl 310) ACPI: PCI Interrupt 0000:05:02.1[A] -> GSI 23 (level, low) -> IRQ 19 scsi12 : pata_ali scsi13 : pata_ali ata13: PATA max UDMA/133 cmd 0x0001c880 ctl 0x0001c802 bmdma 0x0001c080 irq 0 ata14: PATA max UDMA/133 cmd 0x0001c480 ctl 0x0001c402 bmdma 0x0001c088 irq 0 ata13: device not ready (errno=-19), forcing hardreset ata13: BUG: prereset() requested invalid reset type ata14.00: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728 ata14.00: ATA-7: Maxtor 6Y120L0, YAR41VW0, max UDMA/133 ata14.00: 240121728 sectors, multi 16: LBA ata14.01: ata_hpa_resize 1: sectors = 20044080, hpa_sectors = 20044080 ata14.01: ATA-4: QUANTUM FIREBALLlct10 10, A03.0900, max UDMA/66 ata14.01: 20044080 sectors, multi 16: LBA ata14.01: limited to UDMA/33 due to 40-wire cable ata14.00: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728 ata14.00: configured for UDMA/133 ata14.01: ata_hpa_resize 1: sectors = 20044080, hpa_sectors = 20044080 ata14.01: configured for UDMA/33 scsi 13:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5 sd 13:0:0:0: [sdb] 240121728 512-byte hardware sectors (122942 MB) sd 13:0:0:0: [sdb] Write Protect is off sd 13:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 13:0:0:0: [sdb] 240121728 512-byte hardware sectors (122942 MB) sd 13:0:0:0: [sdb] Write Protect is off sd 13:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 13:0:0:0: [sdb] Attached SCSI disk sd 13:0:0:0: Attached scsi generic sg3 type 0 scsi 13:0:1:0: Direct-Access ATA QUANTUM FIREBALL A03. PQ: 0 ANSI: 5 sd 13:0:1:0: [sdc] 20044080 512-byte hardware sectors (10263 MB) sd 13:0:1:0: [sdc] Write Protect is off sd 13:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 13:0:1:0: [sdc] 20044080 512-byte hardware sectors (10263 MB) sd 13:0:1:0: [sdc] Write Protect is off sd 13:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sd 13:0:1:0: [sdc] Attached SCSI disk sd 13:0:1:0: Attached scsi generic sg4 type 0 Done. Begin: Running /scripts/init-premount ... ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - 1F, should be 12 [20070126] ACPI: SSDT 3FF9E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) Parsing all Control Methods: Table [SSDT](id 0052) - 9 Objects with 0 Devices 3 Methods 0 Regions ACPI: SSDT 3FF9E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) Parsing all Control Methods: Table [SSDT](id 0055) - 7 Objects with 0 Devices 4 Methods 0 Regions ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com 4 logical volume(s) in volume group "mainVol" now active Done. Begin: Running /scripts/local-premount ... resume: libgcrypt version: 1.2.3 resume: Could not read the image Done. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with journal data mode. Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. INIT: version 2.86 booting Setting hostname to 'dreamland.darkstar.lan'...done. Files under mount point '/lib/init/rw' will be hidden. Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17 Linux agpgart interface v0.102 (c) Dave Jones PCI: Setting latency timer of device 0000:03:00.0 to 64 agpgart: Detected an Intel 965G Chipset. agpgart: AGP aperture is 256M @ 0x0 atl1 0000:03:00.0: version 2.0.7 parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] USB Universal Host Controller Interface driver v3.0 e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation PCI: Enabling device 0000:00:1f.3 (0001 -> 0003) ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000dc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 20, io mem 0xffaff400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffaff000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 22 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[22] MMIO=[ff7ef800-ff7effff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 21 e100: eth0: e100_probe: addr 0xdfeff000, irq 21, MAC addr 00:50:8B:5C:21:8B done. Setting parameters of disc: /dev/sda failed! Activating swap:swapon on /dev/sAdding 787176k swap on /dev/sdc2. Priority:9 extents:1 across:787176k dc2 . Will now check root file system:fsck 1.40-WIP (14-Nov-2006) Setting the system clock.. System Clock set. Local time: Fri May 18 19:20:26 CEST 2007. Cleaning up ifupdown.... Loading kernel module ipv6. NET: Registered protocol family 10 Loading kernel module i2c-isa. Loading kernel module acpi-cpufreq. processor_perflib-0519 [00] processor_get_psd : Invalid _PSD data processor_perflib-0519 [00] processor_get_psd : Invalid _PSD data Loading kernel module cpufreq_ondemand. Loading device-mapper support. Loading device-mapper support. Setting up LVM Volume Groups... Reading all physical volumes. This may take a while... Found volume group "storage" using metadata type lvm2 Found volume group "mainVol" using metadata type lvm2 1 logical volume(s) in volume group "storage" now active 4 logical volume(s) in volume group "mainVol" now active Will now check all file systems. fsck 1.40-WIP (14-Nov-2006) Checking all file systems. [/sbin/fsck.ext3 (1) -- /usr] fsck.ext3 -a -C0 /dev/mainVol/usr usr: clean, 177358/4587520 files, 8695364/9175040 blocks (check in 2 mounts) [/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a -C0 /dev/mainVol/home home: clean, 313656/8945664 files, 17534356/17886208 blocks (check in 3 mounts) [/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a -C0 /dev/mainVol/var var: clean, 101247/1310720 files, 1595929/2621440 blocks [/sbin/fsck.xfs (1) -- /mnt/media] fsck.xfs -a /dev/storage/media /sbin/fsck.xfs: XFS file system. Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable. Setting kernel variables...done. Starting filesystem in userspace: fusefuse init (API version 7.8) . Will now mount local filesystems:mount: special device /dev/hdd1 does not exist Installing knfsd (copyright (C) 1996 okir@monad.swb.de). kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Filesystem "dm-4": Disabling barriers, not supported by the underlying device XFS mounting filesystem dm-4 Ending clean XFS mount for filesystem: dm-4 failed! Will now activate swapfile swap:done. Discovering hardware: e100 ohci1394 Skipping Module e100. It's already loaded. Skipping Module ohci1394. It's already loaded. Cleaning /tmp...done. Cleaning /var/run...done. Cleaning /var/lock...done. Loading IPsec SA/SP database from /etc/ipsec-tools.conf: BUG: unable to handle kernel paging request at virtual address 6b6b6ceb printing eip: b0141aef *pde = 00000000 Oops: 0002 [#1] PREEMPT SMP Modules linked in: sha1 md5 hmac crypto_hash cryptomgr crypto_algapi nfsd exportfs lockd sunrpc vfat fat nls_base fuse cpufreq_ondemand acpi_cpufreq freq_table i2c_isa ipv6 snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm ohci1394 e100 ieee1394 snd_timer ehci_hcd uhci_hcd parport_pc parport i2c_i801 intel_agp agpgart atl1 mii usbcore snd soundcore snd_page_alloc dm_snapshot dm_mod thermal processor fan pata_ali sata_uli reiserfs xfs CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010256 (2.6.22-rc1-libata-g705962cc-dirty #63) EIP is at module_put+0x1c/0x57 eax: 00000000 ebx: 6b6b6b6b ecx: 00000001 edx: e8c2d000 esi: 00000000 edi: e93c0920 ebp: 00000000 esp: e8c2dfa8 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process cryptomgr (pid: 4575, ti=e8c2d000 task=efd24070 task.ti=e8c2d000) Stack: e93c0920 00000000 e93c0920 f19ac235 00000282 e8aa2bc0 00000000 e93c0920 f19ac1b3 00000000 00000000 b0131351 0000007b b0131316 00000000 b0104b3b e8aa2bb4 00000000 00000000 00000000 00000000 00000000 Call Trace: [] cryptomgr_probe+0x82/0x99 [cryptomgr] [] cryptomgr_probe+0x0/0x99 [cryptomgr] [] kthread+0x3b/0x62 [] kthread+0x0/0x62 [] kernel_thread_helper+0x7/0x10 ======================= Code: e8 fa 70 08 00 83 c4 0c 89 d8 5b 5e 5f 5d c3 53 89 c3 83 ec 08 85 c0 74 49 b8 01 00 00 00 e8 ba a4 fd ff e8 34 70 09 00 c1 e0 07 8c 18 80 01 00 00 83 3b 02 75 0b 8b 83 88 02 00 00 e8 18 9e EIP: [] module_put+0x1c/0x57 SS:ESP 0068:e8c2dfa8 note: cryptomgr[4575] exited with preempt_count 1 BUG: unable to handle kernel paging request at virtual address 6b6b6d6b printing eip: b0141aef *pde = 00000000 Oops: 0002 [#2] PREEMPT SMP Modules linked in: des cbc blkcipher sha1 md5 hmac crypto_hash cryptomgr crypto_algapi nfsd exportfs lockd sunrpc vfat fat nls_base fuse cpufreq_ondemand acpi_cpufreq freq_table i2c_isa ipv6 snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm ohci1394 e100 ieee1394 snd_timer ehci_hcd uhci_hcd parport_pc parport i2c_i801 intel_agp agpgart atl1 mii usbcore snd soundcore snd_page_alloc dm_snapshot dm_mod thermal processor fan pata_ali sata_uli reiserfs xfs CPU: 1 EIP: 0060:[] Not tainted VLI EFLAGS: 00010212 (2.6.22-rc1-libata-g705962cc-dirty #63) EIP is at module_put+0x1c/0x57 eax: 00000080 ebx: 6b6b6b6b ecx: 00000001 edx: ee7c4000 esi: f1b3fb60 edi: ee600e98 ebp: fffffffe esp: ee7c4fa8 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process cryptomgr (pid: 4614, ti=ee7c4000 task=ee22eaf0 task.ti=ee7c4000) Stack: fffffffe f1b3fb60 fffffffe f19ac235 00000282 e8aa2bc0 00000000 ee600e98 f19ac1b3 00000000 00000000 b0131351 0000007b b0131316 00000000 b0104b3b e8aa2bb4 00000000 00000000 00000000 00000000 00000000 Call Trace: [] cryptomgr_probe+0x82/0x99 [cryptomgr] [] cryptomgr_probe+0x0/0x99 [cryptomgr] [] kthread+0x3b/0x62 [] kthread+0x0/0x62 [] kernel_thread_helper+0x7/0x10 ======================= Code: e8 fa 70 08 00 83 c4 0c 89 d8 5b 5e 5f 5d c3 53 89 c3 83 ec 08 85 c0 74 49 b8 01 00 00 00 e8 ba a4 fd ff e8 34 70 09 00 c1 e0 07 8c 18 80 01 00 00 83 3b 02 75 0b 8b 83 88 02 00 00 e8 18 9e EIP: [] module_put+0x1c/0x57 SS:ESP 0068:ee7c4fa8 note: cryptomgr[4614] exited with preempt_count 1 BUG: unable to handle kernel paging request at virtual address 6b6b6d6b printing eip: b0141aef *pde = 00000000 Oops: 0002 [#3] PREEMPT SMP Modules linked in: des cbc blkcipher sha1 md5 hmac crypto_hash cryptomgr crypto_algapi nfsd exportfs lockd sunrpc vfat fat nls_base fuse cpufreq_ondemand acpi_cpufreq freq_table i2c_isa ipv6 snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm ohci1394 e100 ieee1394 snd_timer ehci_hcd uhci_hcd parport_pc parport i2c_i801 intel_agp agpgart atl1 mii usbcore snd soundcore snd_page_alloc dm_snapshot dm_mod thermal processor fan pata_ali sata_uli reiserfs xfs CPU: 1 EIP: 0060:[] Not tainted VLI EFLAGS: 00010212 (2.6.22-rc1-libata-g705962cc-dirty #63) EIP is at module_put+0x1c/0x57 eax: 00000080 ebx: 6b6b6b6b ecx: 00000001 edx: e9187000 esi: f1b3fb60 edi: ee600808 ebp: fffffffe esp: e9187fa8 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process cryptomgr (pid: 4637, ti=e9187000 task=edfd8070 task.ti=e9187000) Stack: fffffffe f1b3fb60 fffffffe f19ac235 00000282 e8aa2bc0 00000000 ee600808 f19ac1b3 00000000 00000000 b0131351 0000007b b0131316 00000000 b0104b3b e8aa2bb4 00000000 00000000 00000000 00000000 00000000 Call Trace: [] cryptomgr_probe+0x82/0x99 [cryptomgr] [] cryptomgr_probe+0x0/0x99 [cryptomgr] [] kthread+0x3b/0x62 [] kthread+0x0/0x62 [] kernel_thread_helper+0x7/0x10 ======================= Code: e8 fa 70 08 00 83 c4 0c 89 d8 5b 5e 5f 5d c3 53 89 c3 83 ec 08 85 c0 74 49 b8 01 00 00 00 e8 ba a4 fd ff e8 34 70 09 00 c1 e0 07 8c 18 80 01 00 00 83 3b 02 75 0b 8b 83 88 02 00 00 e8 18 9e EIP: [] module_put+0x1c/0x57 SS:ESP 0068:e9187fa8 note: cryptomgr[4637] exited with preempt_count 1 done. Setting up resolvconf...done. Setting up networking.... Configuring network interfaces...e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex CBQ: class 00010001 has bad quantum==0, repaired. u32 classifier input device check on Actions configured Reloading Squid configuration files. done. done. Starting portmap daemon.... Setting sensors limits: done. Setting console screen modes and fonts. Setting up ALSA...done. Initializing random number generator...done. Setting up X server socket directory /tmp/.X11-unix.... Setting up ICE socket directory /tmp/.ICE-unix.... INIT: Entering runlevel: 2 Starting system log daemon.... Starting kernel log daemon.... Starting domain name service...: bind. Starting portmap daemon...Already running.. Starting SpamAssassin Mail Filter Daemon: spamd. Loading ACPI modules...Module already loaded: processor Loaded module: button Module already loaded: fan Module already loaded: thermal . Starting Advanced Configuration and Power Interface daemon.... CPUFreq Utilities: Setting ondemand CPUFreq governor... CPU0 CPU1 done. Starting Common Unix Printing System: cupsd. Starting Dynamic DNS service update utility: ddclient. Starting mouse interface server: gpm. icecast2 daemon disabled - read /etc/default/icecast2. Starting internet superserver: inetd. Starting news server: done. Starting SMP IRQ Balancer: irqbalance. Exporting directories for NFS kernel daemon.... Starting NFS kernel daemon: nfsd mountd. Starting internet superserver: inetdStarting Postfix Mail Transport Agent: postfix. Starting radvd: radvd. Starting Samba daemons: nmbd smbd. * Not starting S.M.A.R.T. daemon smartd, disabled via /etc/default/smartmontools Starting OpenBSD Secure Shell server: sshd. Starting the system activity data collector: sadc. Starting User-mode networking switch: uml_switch. Starting the Winbind daemon: winbind. Starting NFS common utilities: statd idmapd. Starting Squid HTTP proxy: squid. Configuring kernel parameters... done Starting anac(h)ronistic cron: anacron. Starting deferred execution scheduler: atd. Starting periodic command scheduler.... Enabling additional executable binary formats: binfmt-support. Starting web server (apache2).... Running local boot scripts (/etc/rc.local). Luca -- Sbagliare ? umano, ma per incasinare davvero le cose serve un computer. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/