Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Puranjay Mohan <p-mohan@ti.com>
To:     <linux-kernel@vger.kernel.org>
CC:     <bjorn.andersson@linaro.org>, <mathieu.poirier@linaro.org>,
        <krzysztof.kozlowski+dt@linaro.org>,
        <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <nm@ti.com>, <ssantosh@kernel.org>, <s-anna@ti.com>,
        <p-mohan@ti.com>, <linux-arm-kernel@lists.infradead.org>,
        <rogerq@kernel.org>, <grygorii.strashko@ti.com>, <vigneshr@ti.com>,
        <kishon@ti.com>, <robh@kernel.org>
Subject: [PATCH v4 3/6] remoteproc: pru: Make sysfs entries read-only for PRU client driven boots
Date:   Fri, 3 Jun 2022 17:45:17 +0530
Message-ID: <20220603121520.13730-4-p-mohan@ti.com>
In-Reply-To: <20220603121520.13730-1-p-mohan@ti.com>
References: <20220603121520.13730-1-p-mohan@ti.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

From: Suman Anna <s-anna@ti.com>

The PRU remoteproc driver is not configured for 'auto-boot' by default,
and allows to be booted either by in-kernel PRU client drivers or by
userspace using the generic remoteproc sysfs interfaces. The sysfs
interfaces should not be permitted to change the remoteproc firmwares
or states when a PRU is being managed by an in-kernel client driver.
Use the newly introduced remoteproc generic 'sysfs_read_only' flag to
provide these restrictions by setting and clearing it appropriately
during the PRU acquire and release steps.

Signed-off-by: Suman Anna <s-anna@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
---
 drivers/remoteproc/pru_rproc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 7a35b400287a..9fed3e0372d3 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -231,6 +231,7 @@ struct rproc *pru_rproc_get(struct device_node *np, int index,
 	}
 
 	pru->client_np = np;
+	rproc->sysfs_read_only = true;
 
 	mutex_unlock(&pru->lock);
 
@@ -265,6 +266,7 @@ void pru_rproc_put(struct rproc *rproc)
 	}
 
 	pru->client_np = NULL;
+	rproc->sysfs_read_only = false;
 	mutex_unlock(&pru->lock);
 
 	put_device(&rproc->dev);
-- 
2.17.1