Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Uladzislau Rezki <urezki@gmail.com>
Date:   Sun, 5 Jun 2022 11:10:31 +0200
To:     "Paul E. McKenney" <paulmck@kernel.org>
Cc:     "Uladzislau Rezki (Sony)" <urezki@gmail.com>,
        LKML <linux-kernel@vger.kernel.org>, RCU <rcu@vger.kernel.org>,
        Frederic Weisbecker <frederic@kernel.org>,
        Neeraj Upadhyay <neeraj.iitr10@gmail.com>,
        Joel Fernandes <joel@joelfernandes.org>,
        Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Subject: Re: [PATCH 2/2] rcu/kvfree: Introduce KFREE_DRAIN_JIFFIES_[MAX/MIN]
 interval
Message-ID: <YpxzB3/HRN/EEHa8@pc638.lan>
References: <20220602080644.432156-1-urezki@gmail.com>
 <20220602080644.432156-2-urezki@gmail.com>
 <20220604155108.GU1790663@paulmck-ThinkPad-P17-Gen-1>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220604155108.GU1790663@paulmck-ThinkPad-P17-Gen-1>
Precedence: bulk

> On Thu, Jun 02, 2022 at 10:06:44AM +0200, Uladzislau Rezki (Sony) wrote:
> > Currently the monitor work is scheduled with a fixed interval that
> > is HZ/20 or each 50 milliseconds. The drawback of such approach is
> > a low utilization of page slot in some scenarios. The page can store
> > up to 512 records. For example on Android system it can look like:
> > 
> > <snip>
> >   kworker/3:0-13872   [003] .... 11286.007048: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000026522604 nr_records=1
> >   kworker/3:0-13872   [003] .... 11286.015638: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000095ed6fca nr_records=2
> >   kworker/1:2-20434   [001] .... 11286.051230: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044872ffd nr_records=1
> >   kworker/1:2-20434   [001] .... 11286.059322: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000026522604 nr_records=2
> >   kworker/0:1-20052   [000] .... 11286.095295: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044872ffd nr_records=2
> >   kworker/0:1-20052   [000] .... 11286.103418: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000cbcf05db nr_records=1
> >   kworker/2:3-14372   [002] .... 11286.135155: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000095ed6fca nr_records=2
> >   kworker/2:3-14372   [002] .... 11286.135198: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044872ffd nr_records=1
> >   kworker/1:2-20434   [001] .... 11286.155377: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000cbcf05db nr_records=5
> >   kworker/2:3-14372   [002] .... 11286.167181: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000026522604 nr_records=5
> >   kworker/1:2-20434   [001] .... 11286.179202: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000008ef95e14 nr_records=1
> >   kworker/2:3-14372   [002] .... 11286.187398: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000c597d297 nr_records=6
> >   kworker/3:0-13872   [003] .... 11286.187445: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000050bf92e2 nr_records=3
> >   kworker/1:2-20434   [001] .... 11286.198975: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000cbcf05db nr_records=4
> >   kworker/1:2-20434   [001] .... 11286.207203: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000095ed6fca nr_records=4
> > <snip>
> > 
> > where a page only carries few records to reclaim a memory. In order to
> > improve batching and make utilization more efficient the patch introduces
> > a drain interval that can be set either to KFREE_DRAIN_JIFFIES_MAX or
> > KFREE_DRAIN_JIFFIES_MIN. It is adjusted if a flood is detected, in this
> > case a memory reclaim occurs more often whereas in mostly idle cases the
> > interval is set to its maximum timeout that improves the utilization of
> > page slots.
> > 
> > Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
> 
> That does look like a problem well worth solving!
>
Agree, better ideas make better final solution :)

> 
> But I am missing one thing. If we are having a callback flood, why do we
> need a shorter timeout?
>
To offload faster, because otherwise we run into classical issue, it is a low
memory condition state resulting in OOM.

>
> Wouldn't a check on the number of blocks queued be simpler, more direct,
> and provide faster response to the start of a callback flood?
>
I rely on krcp->count because not always we can store the pointer in the page
slots. We can not allocate a page in the caller context thus we use page-cache
worker that fills the cache in normal context. While it populates the cache, 
pointers temporary are queued to the linked-list.

Any thoughts?

--
Uladzislau Rezki