Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
To:     linux-serial@vger.kernel.org, Greg KH <gregkh@linuxfoundation.org>,
        Jiri Slaby <jirislaby@kernel.org>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        linux-kernel@vger.kernel.org
Cc:     =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 06/36] serial: 8250_dwlib: Fill in rs485_supported
Date:   Mon,  6 Jun 2022 13:04:03 +0300
Message-Id: <20220606100433.13793-7-ilpo.jarvinen@linux.intel.com>
In-Reply-To: <20220606100433.13793-1-ilpo.jarvinen@linux.intel.com>
References: <20220606100433.13793-1-ilpo.jarvinen@linux.intel.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add information on supported serial_rs485 features. When the driver is
using em485, take advantage of serial8250_em485_supported.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/8250/8250_dwlib.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index fbabfdd8c7b8..120b29519d74 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -149,6 +149,11 @@ static bool dw8250_detect_rs485_hw(struct uart_port *p)
 	return reg;
 }
 
+static const struct serial_rs485 dw8250_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_RTS_ON_SEND |
+		 SER_RS485_RTS_AFTER_SEND,
+};
+
 void dw8250_setup_port(struct uart_port *p)
 {
 	struct dw8250_port_data *pd = p->private_data;
@@ -159,8 +164,10 @@ void dw8250_setup_port(struct uart_port *p)
 	pd->hw_rs485_support = dw8250_detect_rs485_hw(p);
 	if (pd->hw_rs485_support) {
 		p->rs485_config = dw8250_rs485_config;
+		p->rs485_supported = &dw8250_rs485_supported;
 	} else {
 		p->rs485_config = serial8250_em485_config;
+		p->rs485_supported = &serial8250_em485_supported;
 		up->rs485_start_tx = serial8250_em485_start_tx;
 		up->rs485_stop_tx = serial8250_em485_stop_tx;
 	}
-- 
2.30.2