Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
To:     linux-serial@vger.kernel.org, Greg KH <gregkh@linuxfoundation.org>,
        Jiri Slaby <jirislaby@kernel.org>,
        Richard Genoud <richard.genoud@gmail.com>,
        Nicolas Ferre <nicolas.ferre@microchip.com>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Claudiu Beznea <claudiu.beznea@microchip.com>,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 14/36] serial: atmel: Fill in rs485_supported
Date:   Mon,  6 Jun 2022 13:04:11 +0300
Message-Id: <20220606100433.13793-15-ilpo.jarvinen@linux.intel.com>
In-Reply-To: <20220606100433.13793-1-ilpo.jarvinen@linux.intel.com>
References: <20220606100433.13793-1-ilpo.jarvinen@linux.intel.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add information on supported serial_rs485 features.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/atmel_serial.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index dd1c7e4bd1c9..74dd1d3ac46f 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2473,6 +2473,12 @@ static const struct uart_ops atmel_pops = {
 #endif
 };
 
+static const struct serial_rs485 atmel_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX,
+	.delay_rts_before_send = 1,
+	.delay_rts_after_send = 1,
+};
+
 /*
  * Configure the port from the platform device resource info.
  */
@@ -2494,6 +2500,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 	port->mapbase		= mpdev->resource[0].start;
 	port->irq		= platform_get_irq(mpdev, 0);
 	port->rs485_config	= atmel_config_rs485;
+	port->rs485_supported	= &atmel_rs485_supported;
 	port->iso7816_config	= atmel_config_iso7816;
 	port->membase		= NULL;
 
-- 
2.30.2