Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
To:     linux-serial@vger.kernel.org, Greg KH <gregkh@linuxfoundation.org>,
        Jiri Slaby <jirislaby@kernel.org>,
        Vladimir Zapolskiy <vz@mleia.com>,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 09/36] serial: 8250_lpc18cc: Fill in rs485_supported
Date:   Mon,  6 Jun 2022 13:04:06 +0300
Message-Id: <20220606100433.13793-10-ilpo.jarvinen@linux.intel.com>
In-Reply-To: <20220606100433.13793-1-ilpo.jarvinen@linux.intel.com>
References: <20220606100433.13793-1-ilpo.jarvinen@linux.intel.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add information on supported serial_rs485 features.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/8250/8250_lpc18xx.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 570e25d6f37e..66ce5d05fe9c 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -98,6 +98,12 @@ static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value)
 	writel(value, p->membase + offset);
 }
 
+static const struct serial_rs485 lpc18xx_rs485_supported = {
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
+	.delay_rts_after_send = 1,
+	/* Delay RTS before send is not supported */
+};
+
 static int lpc18xx_serial_probe(struct platform_device *pdev)
 {
 	struct lpc18xx_uart_data *data;
@@ -168,6 +174,7 @@ static int lpc18xx_serial_probe(struct platform_device *pdev)
 	uart.port.uartclk = clk_get_rate(data->clk_uart);
 	uart.port.private_data = data;
 	uart.port.rs485_config = lpc18xx_rs485_config;
+	uart.port.rs485_supported = &lpc18xx_rs485_supported;
 	uart.port.serial_out = lpc18xx_uart_serial_out;
 
 	uart.dma = &data->dma;
-- 
2.30.2