Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Andrew Lunn <andrew@lunn.ch>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>
Cc:     Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de,
        linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH net-next v1 3/3] net: phy: dp83td510: disable cable test support for 1Vpp PHYs
Date:   Tue,  7 Jun 2022 12:17:10 +0200
Message-Id: <20220607101710.2833332-3-o.rempel@pengutronix.de>
In-Reply-To: <20220607101710.2833332-1-o.rempel@pengutronix.de>
References: <20220607101710.2833332-1-o.rempel@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Using 1Vpp pulse provides most unreliable results. So, disable cable
testing if PHY is bootstrapped to use 1Vpp-only mode.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/phy/dp83td510.c | 52 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c
index d0229f3b0181..fb39eec40e10 100644
--- a/drivers/net/phy/dp83td510.c
+++ b/drivers/net/phy/dp83td510.c
@@ -31,6 +31,8 @@
 #define DP83TD510E_TDR_FAIL			BIT(0)
 
 #define DP83TD510E_TDR_CFG1			0x300
+/* TX_TYPE: Transmit voltage level for TDR. 0 = 1V, 1 = 2.4V */
+#define DP83TD510E_TDR_TX_TYPE			BIT(12)
 
 #define DP83TD510E_TDR_CFG2			0x301
 #define DP83TD510E_TDR_END_TAP_INDEX_1		GENMASK(14, 8)
@@ -71,6 +73,10 @@
 #define DP83TD510E_UNKN_0310			0x310
 #define DP83TD510E_0310_VAL			0x0036
 
+#define DP83TD510E_CHIP_SOR_1			0x467
+/* If LED_2 is set, blacklist 2.4V mode */
+#define DP83TD510E_SOR_LED_2			BIT(7)
+
 #define DP83TD510E_AN_STAT_1			0x60c
 #define DP83TD510E_MASTER_SLAVE_RESOL_FAIL	BIT(15)
 
@@ -78,6 +84,10 @@
 
 #define DP83TD510_SQI_MAX	7
 
+struct dp83td510_priv {
+	bool allow_v2_4_mode;
+};
+
 struct dp83td510_mse_sqi_range {
 	u16 end;
 	u16 start;
@@ -315,12 +325,29 @@ static int dp83td510_tdr_init(struct phy_device *phydev)
 
 static int dp83td510_cable_test_start(struct phy_device *phydev)
 {
-	int ret;
+	struct dp83td510_priv *priv = phydev->priv;
+	int ret, cfg = 0;
+
+	/* Generate 2.4Vpp pulse if HW is allowed to do so */
+	if (priv->allow_v2_4_mode) {
+		cfg |= DP83TD510E_TDR_TX_TYPE;
+	} else {
+		/* This PHY do not provide usable results with 1Vpp pulse.
+		 * Potentially different dp83td510_tdr_init() values are
+		 * needed.
+		 */
+		return -EOPNOTSUPP;
+	}
 
 	ret = dp83td510_tdr_init(phydev);
 	if (ret)
 		return ret;
 
+	ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_TDR_CFG1,
+			     DP83TD510E_TDR_TX_TYPE, cfg);
+	if (ret)
+		return ret;
+
 	return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_TDR_CFG,
 				DP83TD510E_TDR_START);
 }
@@ -376,6 +403,28 @@ static int dp83td510_cable_test_get_status(struct phy_device *phydev,
 	return phy_set_bits(phydev, MII_BMCR, BMCR_RESET);
 }
 
+static int dp83td510_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct dp83td510_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_CHIP_SOR_1);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & DP83TD510E_SOR_LED_2))
+		priv->allow_v2_4_mode = true;
+
+	return 0;
+}
+
 static int dp83td510_get_features(struct phy_device *phydev)
 {
 	/* This PHY can't respond on MDIO bus if no RMII clock is enabled.
@@ -400,6 +449,7 @@ static struct phy_driver dp83td510_driver[] = {
 	.name		= "TI DP83TD510E",
 
 	.flags          = PHY_POLL_CABLE_TEST,
+	.probe		= dp83td510_probe,
 	.config_aneg	= dp83td510_config_aneg,
 	.read_status	= dp83td510_read_status,
 	.get_features	= dp83td510_get_features,
-- 
2.30.2