Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Satya Priya <quic_c_skakit@quicinc.com>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>
CC:     Lee Jones <lee.jones@linaro.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <swboyd@chromium.org>,
        <quic_collinsd@quicinc.com>, <quic_subbaram@quicinc.com>,
        <quic_jprakash@quicinc.com>,
        Satya Priya <quic_c_skakit@quicinc.com>
Subject: [PATCH V14 1/9] dt-bindings: mfd: pm8008: Add reset-gpios
Date:   Tue, 7 Jun 2022 17:20:07 +0530
Message-ID: <1654602615-28849-2-git-send-email-quic_c_skakit@quicinc.com>
In-Reply-To: <1654602615-28849-1-git-send-email-quic_c_skakit@quicinc.com>
References: <1654602615-28849-1-git-send-email-quic_c_skakit@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add reset-gpios property for pm8008.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in V14:
 - None.

Changes in V13:
 - None.

Changes in V12:
 - None.

Changes in V11:
 - Change the GPIO_ACTIVE_HIGH flag to GPIO_ACTIVE_LOW.

 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index ec3138c..a89649c 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -44,6 +44,9 @@ properties:
   "#size-cells":
     const: 0
 
+  reset-gpios:
+    maxItems: 1
+
 patternProperties:
   "^gpio@[0-9a-f]+$":
     type: object
@@ -92,6 +95,7 @@ required:
   - "#address-cells"
   - "#size-cells"
   - "#interrupt-cells"
+  - reset-gpios
 
 additionalProperties: false
 
@@ -99,6 +103,7 @@ examples:
   - |
     #include <dt-bindings/mfd/qcom-pm8008.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
     qupv3_se13_i2c {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -113,6 +118,8 @@ examples:
         interrupt-parent = <&tlmm>;
         interrupts = <32 IRQ_TYPE_EDGE_RISING>;
 
+        reset-gpios = <&pm8350c_gpios 4 GPIO_ACTIVE_LOW>;
+
         pm8008_gpios: gpio@c000 {
           compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
           reg = <0xc000>;
-- 
2.7.4