Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Satya Priya <quic_c_skakit@quicinc.com>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>
CC:     Lee Jones <lee.jones@linaro.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <swboyd@chromium.org>,
        <quic_collinsd@quicinc.com>, <quic_subbaram@quicinc.com>,
        <quic_jprakash@quicinc.com>,
        Satya Priya <quic_c_skakit@quicinc.com>
Subject: [PATCH V14 9/9] arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp
Date:   Tue, 7 Jun 2022 17:20:15 +0530
Message-ID: <1654602615-28849-10-git-send-email-quic_c_skakit@quicinc.com>
In-Reply-To: <1654602615-28849-1-git-send-email-quic_c_skakit@quicinc.com>
References: <1654602615-28849-1-git-send-email-quic_c_skakit@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add pm8008 infra and regulators support for sc7280 idp.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
Changes in V14:
 - None.

Changes in V13:
 - None.

Changes in V12:
 - None.

Changes in V11:
 - Add ldos and parent supplies directly under pm8008@8 node.

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 66 ++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 5eb6689..166812e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -271,6 +271,63 @@
 	};
 };
 
+pm8008_bus: &i2c1 {
+	status = "okay";
+};
+
+#include "pm8008.dtsi"
+
+&pm8008 {
+	interrupt-parent = <&tlmm>;
+	interrupts = <24 IRQ_TYPE_EDGE_RISING>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pm8008_active>;
+
+	reset-gpios = <&pm8350c_gpios 4 GPIO_ACTIVE_LOW>;
+
+	vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+	vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+	vdd_l5-supply = <&vreg_bob>;
+	vdd_l6-supply = <&vreg_bob>;
+	vdd_l7-supply = <&vreg_bob>;
+};
+
+&pm8008_l1 {
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <1300000>;
+};
+
+&pm8008_l2 {
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <1250000>;
+};
+
+&pm8008_l3 {
+	regulator-min-microvolt = <1650000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&pm8008_l4 {
+	regulator-min-microvolt = <1504000>;
+	regulator-max-microvolt = <1600000>;
+};
+
+&pm8008_l5 {
+	regulator-min-microvolt = <2600000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&pm8008_l6 {
+	regulator-min-microvolt = <2600000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&pm8008_l7 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3544000>;
+};
+
 &qfprom {
 	vcc-supply = <&vreg_l1c_1p8>;
 };
@@ -383,6 +440,15 @@
 	drive-strength = <2>;
 };
 
+&pm8350c_gpios {
+	pm8008_active: pm8008-active {
+		pins = "gpio4";
+		function = "normal";
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
 &qspi_cs0 {
 	bias-disable;
 };
-- 
2.7.4