Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754946AbXEUAob (ORCPT ); Sun, 20 May 2007 20:44:31 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758561AbXEUAoW (ORCPT ); Sun, 20 May 2007 20:44:22 -0400 Received: from mtoichi12.ns.itscom.net ([219.110.2.182]:52093 "EHLO mtoichi12.ns.itscom.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758352AbXEUAoV (ORCPT ); Sun, 20 May 2007 20:44:21 -0400 Date: Mon, 21 May 2007 09:41:19 +0900 From: Mattia Dongili To: David Brownell Cc: Andrew Morton , Linux Kernel Mailing List , ACPI Devel Maling List , linux-pm@lists.linux-foundation.org, Zhang Rui , Len Brown , Greg KH Subject: Re: [2.6.22-rc1-mm1] vaio laptop (SZ72B) immediately resumes after STR Message-ID: <20070521004119.GA3103@inferi.kami.home> References: <20070518071523.GA3195@inferi.kami.home> <20070519000413.75badb6f.akpm@linux-foundation.org> <20070520061408.GA3325@inferi.kami.home> <200705201138.05146.david-b@pacbell.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200705201138.05146.david-b@pacbell.net> X-Message-Flag: Cranky? Try Free Software instead! X-Operating-System: Linux 2.6.22-rc1-mm1-bisect i686 X-Editor: Vim http://www.vim.org/ X-Disclaimer: Buh! User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10706 Lines: 275 On Sun, May 20, 2007 at 11:38:04AM -0700, David Brownell wrote: > On Saturday 19 May 2007, Mattia Dongili wrote: > > On Sat, May 19, 2007 at 12:04:13AM -0700, Andrew Morton wrote: > > > On Sat, 19 May 2007 15:48:29 +0900 Mattia Dongili wrote: > > > > > > > On Fri, May 18, 2007 at 12:22:40AM -0700, Andrew Morton wrote: > > > > > On Fri, 18 May 2007 16:15:24 +0900 Mattia Dongili wrote: > > > > > > > > > > > Hello, > > > > > > > > > > > > After finally catching fw-{ohci,core} to be problematic during resume, > > > > > > I'm now experiencing an immediate resume after suspending. > > > > > > > > > > > > 2.6.21-rc7-mm* didn't even suspend, my last known suspend-and-resuming > > > > > > kernel was 2.6.21-rc5-mm3 (I know one other vaio SZ user could STR with > > > > > > 2.6.21-rc6-mm* after the cpuidle fixes). > > > > > > > > > > > > my .config is: http://oioio.altervista.org/linux/config-2.6.22-rc1-mm1-1 > > > > > > and a str cycle with PM_DEBUG=y: > > > > > > http://oioio.altervista.org/linux/dmesg-SRT-immediately-resumes.txt > > Can you also provide /proc/acpi/wakeup and /proc/bus/usb/devices? > Plus "ethool eth0" and "ethtool -i eth0"? here we go: $ cat /proc/acpi/wakeup Device S-state Status Sysfs node PWRB S4 *enabled S1F0 S4 disabled S1F1 S4 disabled S1F2 S4 disabled S1F3 S4 disabled S1F4 S4 disabled S1F5 S4 disabled S1F6 S4 disabled S1F7 S4 disabled TLAN S3 disabled pci:0000:07:00.0 DLAN S3 disabled S6F0 S4 disabled S6F1 S4 disabled S6F2 S4 disabled S6F3 S4 disabled S6F4 S4 disabled S6F5 S4 disabled S6F6 S4 disabled S6F7 S4 disabled USB1 S3 disabled pci:0000:00:1d.0 USB2 S3 disabled pci:0000:00:1d.1 USB3 S3 disabled pci:0000:00:1d.2 USB4 S3 disabled pci:0000:00:1d.3 USB7 S3 disabled pci:0000:00:1d.7 SLT0 S4 disabled LANC S3 disabled EC0 S5 disabled $ cat /proc/bus/usb/devices T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 45/900 us ( 5%), #Int= 1, #Iso= 1 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.22-rc1-mm1-bisect uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.3 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=054c ProdID=01bb Rev= 1.28 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=044e ProdID=300c Rev=19.15 S: Manufacturer=ALPS S: Product=UGX C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I:* If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.22-rc1-mm1-bisect uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0483 ProdID=2016 Rev= 0.01 S: Manufacturer=STMicroelectronics S: Product=Biometric Coprocessor C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 4 Ivl=20ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.22-rc1-mm1-bisect uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.22-rc1-mm1-bisect uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.22-rc1-mm1-bisect ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=054c ProdID=0281 Rev= 4.52 S: Manufacturer=Sony S: Product=UMH-U09 S: SerialNumber=F000001C9B3A C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05ca ProdID=1830 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=06(still) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=86(I) Atr=01(Isoc) MxPS= 0 Ivl=125us I: If#= 0 Alt= 1 #EPs= 2 Cls=06(still) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=86(I) Atr=01(Isoc) MxPS=2048 Ivl=125us I: If#= 0 Alt= 2 #EPs= 2 Cls=06(still) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=86(I) Atr=01(Isoc) MxPS=3072 Ivl=125us $ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pg Wake-on: d Current message level: 0x000000ff (255) Link detected: yes $ sudo ethtool -i eth0 driver: sky2 version: 1.14 firmware-version: N/A bus-info: 0000:07:00.0 > And, for a bit more info, the output of the appended script. on acpi_system:00/device:00/PNP0C0C:00 on pci0000:00/0000:00:1d.7/usb1 on pci0000:00/0000:00:1d.7 on pci0000:00/0000:00:1d.3/usb5 on pci0000:00/0000:00:1d.3 on pci0000:00/0000:00:1d.2/usb4/4-1 on pci0000:00/0000:00:1d.2/usb4 on pci0000:00/0000:00:1d.2 on pci0000:00/0000:00:1d.1/usb3 on pci0000:00/0000:00:1d.1 on pci0000:00/0000:00:1d.0/usb2 on pci0000:00/0000:00:1d.0 on pci0000:00/0000:00:1c.2/0000:07:00.0 > (That's all *with* the patch listed below -- not reverted.) sure :) ... > > but very very close: > > acpi-driver-model-flags-and-platform_enable_wake.patch > > Which only affects PCI devices at this time, FWIW ... > > This is a symptom of a device or driver misbehaving. You can > work around that; update the relevant /sys/devices/.../power/wakeup > value(s) to "disabled", pending a driver bugfix (or workaround). > > In fact, you could turn them all off (see appended diagnostic > script) then turn them on one at a time to highlight problems > > Reverting that patch just papers over the problem... > > > My suspicion, based on the dmesg and seeing what drivers actually > try to enable wakeup, would be the 'sky2' driver. The other two FWIW the sky2 is never functional upon resume, I need to ifdown, rmmod, modprobe and ifup again to get some networking... > obvious candidates are EHCI (which behaves for me on non-Intel > hardware) and UHCI ... but USB has had a fair amount of testing > in terms of wakeup mechanisms, so that seems a bit less likely > to me (assuming no hardware bugs). > > However, since after reverting the patch above you still saw > other problems (immediate re-suspend) I'm suspecting this isn't > a single simple problem you're finding. eheheh, bisecting this one too, let's see... Thanks -- mattia :wq! - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/