Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates
 149.199.62.198 as permitted sender) receiver=protection.outlook.com;
 client-ip=149.199.62.198; helo=xsj-pvapexch01.xlnx.xilinx.com; pr=C
Envelope-to: bjorn.andersson@linaro.org,
 mathieu.poirier@linaro.org,
 robh+dt@kernel.org,
 krzk+dt@kernel.org,
 linux-remoteproc@vger.kernel.org,
 devicetree@vger.kernel.org,
 linux-kernel@vger.kernel.org,
 linux-arm-kernel@lists.infradead.org,
 openamp-system-reference@lists.openampproject.org
Message-ID: <9722112e-770f-53dd-4b28-48be696c0d12@xilinx.com>
Date:   Tue, 7 Jun 2022 10:32:48 -0700
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:91.0)
 Gecko/20100101 Thunderbird/91.9.1
Subject: Re: [PATCH v8 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem
 bindings
Content-Language: en-US
To:     <bjorn.andersson@linaro.org>, <mathieu.poirier@linaro.org>,
        <robh+dt@kernel.org>, <krzk+dt@kernel.org>,
        <michal.simek@xilinx.com>, <ben.levinsky@xilinx.com>
CC:     <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <openamp-system-reference@lists.openampproject.org>
References: <20220602203834.3675160-1-tanmay.shah@xilinx.com>
 <20220602203834.3675160-2-tanmay.shah@xilinx.com>
From:   Tanmay Shah <tanmay.shah@xilinx.com>
In-Reply-To: <20220602203834.3675160-2-tanmay.shah@xilinx.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 07 Jun 2022 17:32:49.4108
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: eef0a148-d917-4fde-11e9-08da48abbe41
X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.62.198];Helo=[xsj-pvapexch01.xlnx.xilinx.com]
X-MS-Exchange-CrossTenant-AuthSource: SN1NAM02FT0026.eop-nam02.prod.protection.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM6PR02MB5116
X-Spam-Status: No, score=-3.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
	DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,
	NICE_REPLY_A,RDNS_NONE,SPF_HELO_NONE,T_SCC_BODY_TEXT_LINE
	autolearn=unavailable autolearn_force=no version=3.4.6
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on
	lindbergh.monkeyblade.net
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Hi Rob,

Ping for reviews.

Thanks,

Tanmay

On 6/2/22 1:38 PM, Tanmay Shah wrote:
> Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
> Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem
> (cluster).
>
> Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
> ---
>
> Changes in v8:
>    - Add 'items:' for sram property
>
> Changes in v7:
>    - Add minItems in sram property
>
> Changes in v6:
>    - Add maxItems to sram and memory-region property
>
> Changes in v5:
> - Add constraints of the possible values of xlnx,cluster-mode property
> - fix description of power-domains property for r5 core
> - Remove reg, address-cells and size-cells properties as it is not required
> - Fix description of mboxes property
> - Add description of each memory-region and remove old .txt binding link
>    reference in the description
>
> Changes in v4:
>    - Add memory-region, mboxes and mbox-names properties in example
>
> Changes in v3:
>    - None
>
>   .../bindings/remoteproc/xlnx,r5f-rproc.yaml   | 130 ++++++++++++++++++
>   include/dt-bindings/power/xlnx-zynqmp-power.h |   6 +
>   2 files changed, 138 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> new file mode 100644
> index 000000000000..adfe05ff157a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> @@ -0,0 +1,132 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx R5F processor subsystem
> +
> +maintainers:
> +  - Ben Levinsky <ben.levinsky@xilinx.com>
> +  - Tanmay Shah <tanmay.shah@xilinx.com>
> +
> +description: |
> +  The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
> +  real-time processing based on the Cortex-R5F processor core from ARM.
> +  The Cortex-R5F processor implements the Arm v7-R architecture and includes a
> +  floating-point unit that implements the Arm VFPv3 instruction set.
> +
> +properties:
> +  compatible:
> +    const: xlnx,zynqmp-r5fss
> +
> +  xlnx,cluster-mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2]
> +    description: |
> +      The RPU MPCore can operate in split mode(Dual-processor performance), Safety
> +      lock-step mode(Both RPU cores execute the same code in lock-step,
> +      clock-for-clock) or Single CPU mode (RPU core 0 can be held in reset while
> +      core 1 runs normally). The processor does not support dynamic configuration.
> +      Switching between modes is only permitted immediately after a processor reset.
> +      If set to  1 then lockstep mode and if 0 then split mode.
> +      If set to  2 then single CPU mode. When not defined, default will be lockstep mode.
> +
> +patternProperties:
> +  "^r5f-[a-f0-9]+$":
> +    type: object
> +    description: |
> +      The RPU is located in the Low Power Domain of the Processor Subsystem.
> +      Each processor includes separate L1 instruction and data caches and
> +      tightly coupled memories (TCM). System memory is cacheable, but the TCM
> +      memory space is non-cacheable.
> +
> +      Each RPU contains one 64KB memory and two 32KB memories that
> +      are accessed via the TCM A and B port interfaces, for a total of 128KB
> +      per processor. In lock-step mode, the processor has access to 256KB of
> +      TCM memory.
> +
> +    properties:
> +      compatible:
> +        const: xlnx,zynqmp-r5f
> +
> +      power-domains:
> +        description: RPU core PM domain specifier
> +        maxItems: 1
> +
> +      mboxes:
> +        minItems: 1
> +        items:
> +          - description: mailbox channel to send data to RPU
> +          - description: mailbox channel to receive data from RPU
> +
> +      mbox-names:
> +        minItems: 1
> +        items:
> +          - const: tx
> +          - const: rx
> +
> +      sram:
> +        $ref: /schemas/types.yaml#/definitions/phandle-array
> +        minItems: 1
> +        maxItems: 8
> +        items:
> +          maxItems: 1
> +        description: |
> +          phandles to one or more reserved on-chip SRAM regions. Other than TCM,
> +          the RPU can execute instructions and access data from, the OCM memory,
> +          the main DDR memory, and other system memories.
> +
> +          The regions should be defined as child nodes of the respective SRAM
> +          node, and should be defined as per the generic bindings in,
> +          Documentation/devicetree/bindings/sram/sram.yaml
> +
> +      memory-region:
> +        description: |
> +          List of phandles to the reserved memory regions associated with the
> +          remoteproc device. This is variable and describes the memories shared with
> +          the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
> +          vrings, ...). This reserved memory region will be allocated on DDR memory.
> +        minItems: 1
> +        maxItems: 8
> +        items:
> +          - description: region used for RPU firmware image section
> +          - description: vdev buffer
> +          - description: vring0
> +          - description: vring1
> +        additionalItems: true
> +
> +    required:
> +      - compatible
> +      - power-domains
> +
> +    unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    r5fss: r5fss {
> +        compatible = "xlnx,zynqmp-r5fss";
> +        xlnx,cluster-mode = <1>;
> +
> +        r5f-0 {
> +            compatible = "xlnx,zynqmp-r5f";
> +            power-domains = <&zynqmp_firmware 0x7>;
> +            memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> +            mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> +            mbox-names = "tx", "rx";
> +        };
> +
> +        r5f-1 {
> +            compatible = "xlnx,zynqmp-r5f";
> +            power-domains = <&zynqmp_firmware 0x8>;
> +            memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> +            mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> +            mbox-names = "tx", "rx";
> +        };
> +    };
> +...
> diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
> index 0d9a412fd5e0..618024cbb20d 100644
> --- a/include/dt-bindings/power/xlnx-zynqmp-power.h
> +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
> @@ -6,6 +6,12 @@
>   #ifndef _DT_BINDINGS_ZYNQMP_POWER_H
>   #define _DT_BINDINGS_ZYNQMP_POWER_H
>   
> +#define		PD_RPU_0	7
> +#define		PD_RPU_1	8
> +#define		PD_R5_0_ATCM	15
> +#define		PD_R5_0_BTCM	16
> +#define		PD_R5_1_ATCM	17
> +#define		PD_R5_1_BTCM	18
>   #define		PD_USB_0	22
>   #define		PD_USB_1	23
>   #define		PD_TTC_0	24