Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 9 Jun 2022 09:07:49 +0200
From:   Marc Kleine-Budde <mkl@pengutronix.de>
To:     Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc:     linux-kernel@vger.kernel.org,
        Amarula patchwork <linux-amarula@amarulasolutions.com>,
        michael@amarulasolutions.com,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Wolfgang Grandegger <wg@grandegger.com>,
        linux-can@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [RFC PATCH 04/13] can: slcan: use CAN network device driver API
Message-ID: <20220609070749.fjcqsw3nuolgr5wh@pengutronix.de>
References: <20220607094752.1029295-1-dario.binacchi@amarulasolutions.com>
 <20220607094752.1029295-5-dario.binacchi@amarulasolutions.com>
 <20220607111330.tkpaplzeupfq3peh@pengutronix.de>
 <CABGWkvotv4Ebm7OSbp=oQ7vwHhR_=sXfAAEkngjLm2faYrUFPw@mail.gmail.com>
MIME-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha512;
        protocol="application/pgp-signature"; boundary="frh4n6rpdoueeja7"
Content-Disposition: inline
In-Reply-To: <CABGWkvotv4Ebm7OSbp=oQ7vwHhR_=sXfAAEkngjLm2faYrUFPw@mail.gmail.com>
Precedence: bulk


--frh4n6rpdoueeja7
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On 08.06.2022 18:42:09, Dario Binacchi wrote:
> > > In doing so, the struct can_priv::bittiming.bitrate of the driver is =
not
> > > set and since the open_candev() checks that the bitrate has been set,=
 it
> > > must be a non-zero value, the bitrate is set to a fake value (-1) bef=
ore
> > > it is called.
> >
> > What does
> >
> > | ip --details -s -s link show
> >
> > show as the bit rate?
>=20
> # ip --details -s -s link show dev can0

This is the bitrate configured with "ip"?

>  can0: <NOARP,UP,LOWER_UP> mtu 16 qdisc pfifo_fast state UP mode
> DEFAULT group default qlen 10
>     link/can  promiscuity 0 minmtu 0 maxmtu 0
>     can state ERROR-ACTIVE restart-ms 0
>   bitrate 500000 sample-point 0.875
>   tq 41 prop-seg 20 phase-seg1 21 phase-seg2 6 sjw 1
>   slcan: tseg1 2..256 tseg2 1..128 sjw 1..128 brp 1..256 brp-inc 1
>   clock 24000000
>   re-started bus-errors arbit-lost error-warn error-pass bus-off
>   0          0          0          0          0          0
> numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
>     RX: bytes  packets  errors  dropped overrun mcast
>     292        75       0       0       0       0
>     RX errors: length   crc     frame   fifo    missed
>                0        0       0       0       0
>     TX: bytes  packets  errors  dropped carrier collsns
>     0          0        0       0       0       0
>     TX errors: aborted  fifo   window heartbeat transns
>                0        0       0       0       1
>=20
> And after applying your suggestions about using the CAN framework
> support for setting the fixed bit rates (you'll
> find it in V2), this is the output instead:

This looks good.

> # ip --details -s -s link show dev can0
> 5: can0: <NOARP,UP,LOWER_UP> mtu 16 qdisc pfifo_fast state UP mode
> DEFAULT group default qlen 10
>     link/can  promiscuity 0 minmtu 0 maxmtu 0
>     can state ERROR-ACTIVE restart-ms 0
>   bitrate 500000
>      [   10000,    20000,    50000,   100000,   125000,   250000,
>         500000,   800000,  1000000 ]
>   clock 0
>   re-started bus-errors arbit-lost error-warn error-pass bus-off
>   0          0          0          0          0          0
> numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
>     RX: bytes  packets  errors  dropped overrun mcast
>     37307      4789     0       0       0       0
>     RX errors: length   crc     frame   fifo    missed
>                0        0       0       0       0
>     TX: bytes  packets  errors  dropped carrier collsns
>     7276       988      0       0       0       0
>     TX errors: aborted  fifo   window heartbeat transns
>                0        0       0       0       1

Can you configure the bitrate with slcand and show the output of "ip
--details -s -s link show dev can0". I fear it will show 4294967295 as
the bitrate, which I don't like.

A hack would be to replace the -1 by 0 in the CAN netlink code.

Marc

--=20
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

--frh4n6rpdoueeja7
Content-Type: application/pgp-signature; name="signature.asc"

-----BEGIN PGP SIGNATURE-----

iQEzBAABCgAdFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmKhnEIACgkQrX5LkNig
010WSwgAqA3crYZc6TRJlUHLRrLUxsKdkX7A47KeCFQr0JtvQMjb2Z3VB4DsPmtB
M61CVDQ/NRcS4HuuJqyshQsEknOB14BRkgKcZbYqX8BUpcqz2/ghxr23/7J4UT2B
cg7hDrUoXRb4eUCscBdxNT+RTr5K11voeYrcl9XjJ4/0VrC1mv5gCN0oIN11b8qp
973FZd4FBS5X40coGxvT+KIRu8gYcZ048vnFXsB1/L1T2yX7kEdz4uNzxCBF2ajW
qAuhGBR34vb1JVn4Mhfppkfu0TMIdRV8NsOX4wYzDJCS5EQxc8er1vf/57hW3zkU
JwxEDHoFIZrEuOc+umOO1ZpftIkBbw==
=pLef
-----END PGP SIGNATURE-----

--frh4n6rpdoueeja7--