Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
        arm@kernel.org, soc@kernel.org, Nishanth Menon <nm@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 35/48] arm64: dts: ti: align gpio-key node names with dtschema
Date:   Thu,  9 Jun 2022 13:40:22 +0200
Message-Id: <20220609114026.380682-6-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220609113721.379932-1-krzysztof.kozlowski@linaro.org>
References: <20220609113721.379932-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts        | 4 ++--
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 57497cb1ed68..31039f7e36ac 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -73,13 +73,13 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&push_button_pins_default>;
 
-		sw5 {
+		switch-5 {
 			label = "GPIO Key USER1";
 			linux,code = <BTN_0>;
 			gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		sw6 {
+		switch-6 {
 			label = "GPIO Key USER2";
 			linux,code = <BTN_1>;
 			gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2bc26a296496..b1691ac3442d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -26,13 +26,13 @@ gpio_keys: gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
 
-		sw10: sw10 {
+		sw10: switch-10 {
 			label = "GPIO Key USER1";
 			linux,code = <BTN_0>;
 			gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
 		};
 
-		sw11: sw11 {
+		sw11: switch-11 {
 			label = "GPIO Key USER2";
 			linux,code = <BTN_1>;
 			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
-- 
2.34.1