Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
        arm@kernel.org, soc@kernel.org, Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 31/48] ARM: dts: qcom: align gpio-key node names with dtschema
Date:   Thu,  9 Jun 2022 13:40:18 +0200
Message-Id: <20220609114026.380682-2-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20220609113721.379932-1-krzysztof.kozlowski@linaro.org>
References: <20220609113721.379932-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts        | 4 ++--
 arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts | 8 ++++----
 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi             | 2 +-
 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts                 | 4 ++--
 arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi                  | 6 +++---
 arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts  | 4 ++--
 arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi     | 8 ++++----
 arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts       | 6 +++---
 arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts        | 6 +++---
 .../dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts    | 8 ++++----
 10 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index ca9f73528196..549f3ef53b2d 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -44,12 +44,12 @@ ext_3p3v: regulator-fixed@1 {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		volume_up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
-		volume_down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 0cee62c7b8b0..13826462fee5 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -23,28 +23,28 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
 
-		camera-focus {
+		key-camera-focus {
 			label = "camera_focus";
 			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_CAMERA_FOCUS>;
 		};
 
-		camera-snapshot {
+		key-camera-snapshot {
 			label = "camera_snapshot";
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_CAMERA>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "volume_down";
 			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "volume_up";
 			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
index 1f3b1ce82108..af9a26fb5d4a 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
@@ -11,7 +11,7 @@ / {
 	keys {
 		compatible = "gpio-keys";
 
-		reset {
+		key-reset {
 			label = "reset";
 			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 596d129d4a95..760151b52add 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -187,12 +187,12 @@ partition@0 {
 			};
 		};
 
-		gpio_keys {
+		gpio-keys {
 			compatible = "gpio-keys";
 			pinctrl-0 = <&buttons_pins>;
 			pinctrl-names = "default";
 
-			button@1 {
+			button {
 				label = "reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index 5c802b99e15f..ccebb7d56113 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -65,19 +65,19 @@ sata@29000000 {
 			status = "okay";
 		};
 
-		gpio_keys {
+		gpio-keys {
 			compatible = "gpio-keys";
 			pinctrl-0 = <&buttons_pins>;
 			pinctrl-names = "default";
 
-			button@1 {
+			button-1 {
 				label = "reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
-			button@2 {
+			button-2 {
 				label = "wps";
 				linux,code = <KEY_WPS_BUTTON>;
 				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 9493886a5c0d..72e82033252e 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -24,14 +24,14 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
 
-		volume-up {
+		key-volume-up {
 			label = "volume_up";
 			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "volume_down";
 			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
index 1d21de46f85c..e0152f118495 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -20,28 +20,28 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
 
-		volume-down {
+		key-volume-down {
 			label = "volume_down";
 			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		camera-snapshot {
+		key-camera-snapshot {
 			label = "camera_snapshot";
 			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_CAMERA>;
 		};
 
-		camera-focus {
+		key-camera-focus {
 			label = "camera_focus";
 			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_CAMERA_FOCUS>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "volume_up";
 			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
index 58cb2ce1e4df..92857283a675 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -25,7 +25,7 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
 
-		camera-snapshot {
+		key-camera-snapshot {
 			label = "camera_snapshot";
 			gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_CAMERA>;
@@ -33,7 +33,7 @@ camera-snapshot {
 			debounce-interval = <15>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "volume_down";
 			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -41,7 +41,7 @@ volume-down {
 			debounce-interval = <15>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "volume_up";
 			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
index d6b2300a8223..1ed40c14f9d3 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -25,7 +25,7 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
 
-		volume-down {
+		key-volume-down {
 			label = "volume_down";
 			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
@@ -33,7 +33,7 @@ volume-down {
 			debounce-interval = <15>;
 		};
 
-		home-key {
+		key-home {
 			label = "home_key";
 			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
@@ -42,7 +42,7 @@ home-key {
 			debounce-interval = <15>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "volume_up";
 			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 9bd8faea61a5..e409c12edc81 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -24,28 +24,28 @@ gpio-keys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
 
-		volume-down {
+		key-volume-down {
 			label = "volume_down";
 			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		camera-snapshot {
+		key-camera-snapshot {
 			label = "camera_snapshot";
 			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_CAMERA>;
 		};
 
-		camera-focus {
+		key-camera-focus {
 			label = "camera_focus";
 			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_CAMERA_FOCUS>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "volume_up";
 			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
-- 
2.34.1