Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 11 Jun 2022 09:32:47 +0200
From:   Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To:     Christian Hewitt <christianshewitt@gmail.com>
Cc:     Kishon Vijay Abraham I <kishon@ti.com>,
        Mathias Nyman <mathias.nyman@linux.intel.com>,
        Chris Chiu <chris.chiu@canonical.com>,
        linux-usb@vger.kernel.org, linux-amlogic@lists.infradead.org,
        stable@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
        Neil Armstrong <narmstrong@baylibre.com>
Subject: Re: Regression in 5.18.3 from "xhci: Set HCD flag to defer primary
 roothub registration"
Message-ID: <YqRFH2i3s/jL28ZG@kroah.com>
References: <743F7369-2794-4189-8891-5DA62E4B62DA@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <743F7369-2794-4189-8891-5DA62E4B62DA@gmail.com>
Precedence: bulk

On Sat, Jun 11, 2022 at 10:49:23AM +0400, Christian Hewitt wrote:
> Commit 6c64a664e1cff339ec698d803fa8cbb9af5d95ce “xhci: Set HCD flag to defer
> primary roothub registration” added for Linux 5.18.3 caused a regression on
> some Amlogic S912 devices (original user forum report with an Android TV box
> and confirmed with a Khadas VIM2 board). I do not see issues with older S905
> (WeTeK Play2) or newer S922X (Odroid N2+) devices running the same kernel.
> There are no kernel splats or error messages but lsusb shows no output and
> nothing works. Simple revert restores the previous good working behaviour.
> 
> dmesg with commit http://ix.io/3ZTv
> dmesg with revert http://ix.io/3ZTw
> 
> I’m not a coder so will need to be fed instructions to assist with debugging
> the issue further if you don't have access to an Amlogic S912 device. I can
> share devices online for remote poking around if needed.

Does 5.19-rc1 also have this problem?

thanks,

greg k-h