Received: by 2002:a5d:925a:0:0:0:0:0 with SMTP id e26csp219678iol; Sat, 11 Jun 2022 02:35:42 -0700 (PDT) X-Google-Smtp-Source: ABdhPJzcoahpmY3RPIhKfxP+w7tFAN/6qXRlqrlzlgzjcvpLIRo8kNODULtKVjZRE6HihLtdDyWx X-Received: by 2002:a63:2482:0:b0:3fc:55e3:1410 with SMTP id k124-20020a632482000000b003fc55e31410mr45043585pgk.583.1654940142051; Sat, 11 Jun 2022 02:35:42 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1654940142; cv=none; d=google.com; s=arc-20160816; b=Zv/8iY/WduCuDvdq7/QNdsdqjjsNgiyfk5InmmI8E5lzgzxkGvicHbzHq9DcHYKtyM Qs6IdSEEbgVlUvYsqXJpw8XrdxiyKsznLdwxaze5BCCfCGyXO9Zub+vjkwIpy2J6esTt g26AUlgP9YkuAlBvDUksZ9jfp/Zu1wwcxOEF5Qfw5FtENv+vtN45sYZRRahvr8/80mZ6 cnafPvc25zs7iF0+J+x/OggqKaXWlcSMCZ4l+yGSyZ7ETeFOPRbB5CvXLF/vUKWrFE3Y XdeizKae7udMmewCR2Nh3zfUYAnOjJKPpvVA69Dow8nh3qL+79fNZa/jy599wvmaPxwW 45Fw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=UN1rS4N3UNC3Vhq7nTIBWgr8BGdXX2GSZFuEDRG/lqg=; b=NHDqa944lK+IsLO0eLKHGjpzUpxigwloJQhYirM+iFigo1ZFLqqQcID7vkceY5Em5Q 4pEE9my1eNAJL92ySulv8cm9bH2jzHyfvN09aU+VZVbq6We/V8T+nM+G/wEpwhLG83vk +bsgiONw+GkbxbhP7kN209jduk0qpWBIAQ6Na94kAhOS1tO1Oh7VB6WHm+7IuLyhXDIV Fws3zoDlwTCYjjwiqri1BY8KBDdmURayUKDkdChsiFCS0rUdqivQ5j/fR1Mtnex/0KLg Ms6Q7Ji/URCYgVUuxgN5wyPevP2BtNxl5KvBAoOc0ExLzWAkt2fAlLcnbVr8bO7gdR/h FOWg== ARC-Authentication-Results: i=1; mx.google.com; dkim=fail header.i=@metrotek.ru header.s=mail header.b=UttwKvud; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id z10-20020aa7888a000000b0051c395582d3si1682212pfe.186.2022.06.11.02.35.30; Sat, 11 Jun 2022 02:35:42 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=fail header.i=@metrotek.ru header.s=mail header.b=UttwKvud; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232469AbiFKJ3Z (ORCPT + 99 others); Sat, 11 Jun 2022 05:29:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52404 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232614AbiFKJ2f (ORCPT ); Sat, 11 Jun 2022 05:28:35 -0400 Received: from mail.pr-group.ru (mail.pr-group.ru [178.18.215.3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C17D96AA5D; Sat, 11 Jun 2022 02:28:27 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=metrotek.ru; s=mail; h=from:subject:date:message-id:to:cc:mime-version:content-transfer-encoding: in-reply-to:references; bh=8ooPHj9DciQfhFG6N+FDAVSroYYk4O2FaF03l63c+G0=; b=UttwKvudrgKUx4q7pPFqCZgqVbqlFVjlD52zW/Kh8G5eTKk1ZmMgSaBBDRUZswVdASGnRweYbfMoa +Q+iPI/zEiqnYmY7rdUW/XAy25RhDvnuIkVpeZT1wkTUXJ27ywrc9tPp8LVqEF3x4PUYHkvxm8wIyB YfgnO5088ZmfTKV3rahtWd7qtl1igxj5cTtzWjJd2u7WoYMzfxuSWTGBC8/CxDZQDbBj7EefnImiyR OdTK5IyI3kTe6F55DDLIeUF1Y9ICKAc9X7HfLJxpS+mDwGOBAItjaBHgsKMLEfrRAsMEeJHXb1HfSo jdH3PasROeMlEJFOm3ZiTjLLQLW9wGg== X-Kerio-Anti-Spam: Build: [Engines: 2.16.3.1424, Stamp: 3], Multi: [Enabled, t: (0.000016,0.037205)], BW: [Enabled, t: (0.000021,0.000001)], RTDA: [Enabled, t: (0.076314), Hit: No, Details: v2.40.0; Id: 15.52k02f.1g591fe8p.3h0f; mclb], total: 0(700) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS, T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Level: X-Footer: bWV0cm90ZWsucnU= Received: from localhost.localdomain ([178.70.36.174]) (authenticated user i.bornyakov@metrotek.ru) by mail.pr-group.ru with ESMTPSA (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256 bits)); Sat, 11 Jun 2022 12:28:12 +0300 From: Ivan Bornyakov To: mdf@kernel.org, hao.wu@intel.com, yilun.xu@intel.com, trix@redhat.com, corbet@lwn.net Cc: Ivan Bornyakov , Conor.Dooley@microchip.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, linux-fpga@vger.kernel.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, system@metrotek.ru, Conor Dooley Subject: [PATCH v18 3/4] fpga: microchip-spi: add Microchip MPF FPGA manager Date: Sat, 11 Jun 2022 12:05:30 +0300 Message-Id: <20220611090531.9663-4-i.bornyakov@metrotek.ru> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220611090531.9663-1-i.bornyakov@metrotek.ru> References: <20220611090531.9663-1-i.bornyakov@metrotek.ru> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add support to the FPGA manager for programming Microchip Polarfire FPGAs over slave SPI interface with .dat formatted bitsream image. Signed-off-by: Ivan Bornyakov Reviewed-by: Conor Dooley Tested-by: Conor Dooley Acked-by: Xu Yilun --- drivers/fpga/Kconfig | 8 + drivers/fpga/Makefile | 1 + drivers/fpga/microchip-spi.c | 393 +++++++++++++++++++++++++++++++++++ 3 files changed, 402 insertions(+) create mode 100644 drivers/fpga/microchip-spi.c diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index 0831eecc9a09..6c416955da53 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -255,4 +255,12 @@ config FPGA_M10_BMC_SEC_UPDATE (BMC) and provides support for secure updates for the BMC image, the FPGA image, the Root Entry Hashes, etc. +config FPGA_MGR_MICROCHIP_SPI + tristate "Microchip Polarfire SPI FPGA manager" + depends on SPI + help + FPGA manager driver support for Microchip Polarfire FPGAs + programming over slave SPI interface with .dat formatted + bitstream image. + endif # FPGA diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index 139ac1b573d3..42ae8b58abce 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA) += versal-fpga.o +obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI) += microchip-spi.o obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c new file mode 100644 index 000000000000..2d1b73fe0b65 --- /dev/null +++ b/drivers/fpga/microchip-spi.c @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip Polarfire FPGA programming over slave SPI interface. + */ + +#include +#include +#include +#include +#include +#include + +#define MPF_SPI_ISC_ENABLE 0x0B +#define MPF_SPI_ISC_DISABLE 0x0C +#define MPF_SPI_READ_STATUS 0x00 +#define MPF_SPI_READ_DATA 0x01 +#define MPF_SPI_FRAME_INIT 0xAE +#define MPF_SPI_FRAME 0xEE +#define MPF_SPI_PRG_MODE 0x01 +#define MPF_SPI_RELEASE 0x23 + +#define MPF_SPI_FRAME_SIZE 16 + +#define MPF_HEADER_SIZE_OFFSET 24 +#define MPF_DATA_SIZE_OFFSET 55 + +#define MPF_LOOKUP_TABLE_RECORD_SIZE 9 +#define MPF_LOOKUP_TABLE_BLOCK_ID_OFFSET 0 +#define MPF_LOOKUP_TABLE_BLOCK_START_OFFSET 1 + +#define MPF_COMPONENTS_SIZE_ID 5 +#define MPF_BITSTREAM_ID 8 + +#define MPF_BITS_PER_COMPONENT_SIZE 22 + +#define MPF_STATUS_POLL_RETRIES 10000 +#define MPF_STATUS_BUSY BIT(0) +#define MPF_STATUS_READY BIT(1) +#define MPF_STATUS_SPI_VIOLATION BIT(2) +#define MPF_STATUS_SPI_ERROR BIT(3) + +struct mpf_priv { + struct spi_device *spi; + bool program_mode; +}; + +static int mpf_read_status(struct spi_device *spi) +{ + u8 status = 0, status_command = MPF_SPI_READ_STATUS; + struct spi_transfer xfers[2] = { 0 }; + int ret; + + /* + * HW status is returned on MISO in the first byte after CS went + * active. However, first reading can be inadequate, so we submit + * two identical SPI transfers and use result of the later one. + */ + xfers[0].tx_buf = xfers[1].tx_buf = &status_command; + xfers[0].rx_buf = xfers[1].rx_buf = &status; + xfers[0].len = xfers[1].len = 1; + xfers[0].cs_change = 1; + + ret = spi_sync_transfer(spi, xfers, 2); + + if ((status & MPF_STATUS_SPI_VIOLATION) || + (status & MPF_STATUS_SPI_ERROR)) + ret = -EIO; + + return ret ? : status; +} + +static enum fpga_mgr_states mpf_ops_state(struct fpga_manager *mgr) +{ + struct mpf_priv *priv = mgr->priv; + struct spi_device *spi; + bool program_mode; + int status; + + spi = priv->spi; + program_mode = priv->program_mode; + status = mpf_read_status(spi); + + if (!program_mode && !status) + return FPGA_MGR_STATE_OPERATING; + + return FPGA_MGR_STATE_UNKNOWN; +} + +static int mpf_ops_parse_header(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + size_t component_size_byte_num, component_size_byte_off, + components_size_start, bitstream_start, + block_id_offset, block_start_offset; + u8 header_size, blocks_num, block_id; + u32 block_start, component_size; + u16 components_num, i; + + if (!buf) { + dev_err(&mgr->dev, "Image buffer is not provided\n"); + return -EINVAL; + } + + header_size = *(buf + MPF_HEADER_SIZE_OFFSET); + if (header_size > count) { + info->header_size = header_size; + return -EAGAIN; + } + + /* + * Go through look-up table to find out where actual bitstream starts + * and where sizes of components of the bitstream lies. + */ + blocks_num = *(buf + header_size - 1); + block_id_offset = header_size + MPF_LOOKUP_TABLE_BLOCK_ID_OFFSET; + block_start_offset = header_size + MPF_LOOKUP_TABLE_BLOCK_START_OFFSET; + + header_size += blocks_num * MPF_LOOKUP_TABLE_RECORD_SIZE; + if (header_size > count) { + info->header_size = header_size; + return -EAGAIN; + } + + components_size_start = 0; + bitstream_start = 0; + + while (blocks_num--) { + block_id = *(buf + block_id_offset); + block_start = get_unaligned_le32(buf + block_start_offset); + + switch (block_id) { + case MPF_BITSTREAM_ID: + info->header_size = bitstream_start = block_start; + if (block_start > count) + return -EAGAIN; + + break; + case MPF_COMPONENTS_SIZE_ID: + components_size_start = block_start; + break; + default: + break; + } + + if (bitstream_start && components_size_start) + break; + + block_id_offset += MPF_LOOKUP_TABLE_RECORD_SIZE; + block_start_offset += MPF_LOOKUP_TABLE_RECORD_SIZE; + } + + if (!bitstream_start || !components_size_start) { + dev_err(&mgr->dev, "Failed to parse header look-up table\n"); + return -EFAULT; + } + + /* + * Parse bitstream size. + * Sizes of components of the bitstream are 22-bits long placed next + * to each other. Image header should be extended by now up to where + * actual bitstream starts, so no need for overflow check anymore. + */ + components_num = get_unaligned_le16(buf + MPF_DATA_SIZE_OFFSET); + + for (i = 0; i < components_num; i++) { + component_size_byte_num = + (i * MPF_BITS_PER_COMPONENT_SIZE) / BITS_PER_BYTE; + component_size_byte_off = + (i * MPF_BITS_PER_COMPONENT_SIZE) % BITS_PER_BYTE; + + component_size = get_unaligned_le32(buf + + components_size_start + + component_size_byte_num); + component_size >>= component_size_byte_off; + component_size &= GENMASK(MPF_BITS_PER_COMPONENT_SIZE - 1, 0); + + info->data_size += component_size * MPF_SPI_FRAME_SIZE; + } + + return 0; +} + +/* Poll HW status until busy bit is cleared and mask bits are set. */ +static int mpf_poll_status(struct spi_device *spi, u8 mask) +{ + int status, retries = MPF_STATUS_POLL_RETRIES; + + while (retries--) { + status = mpf_read_status(spi); + if (status < 0) + return status; + + if (status & MPF_STATUS_BUSY) + continue; + + if (!mask || (status & mask)) + return status; + } + + return -EBUSY; +} + +static int mpf_spi_write(struct spi_device *spi, const void *buf, size_t buf_size) +{ + int status = mpf_poll_status(spi, 0); + + if (status < 0) + return status; + + return spi_write(spi, buf, buf_size); +} + +static int mpf_spi_write_then_read(struct spi_device *spi, + const void *txbuf, size_t txbuf_size, + void *rxbuf, size_t rxbuf_size) +{ + const u8 read_command[] = { MPF_SPI_READ_DATA }; + int ret; + + ret = mpf_spi_write(spi, txbuf, txbuf_size); + if (ret) + return ret; + + ret = mpf_poll_status(spi, MPF_STATUS_READY); + if (ret < 0) + return ret; + + return spi_write_then_read(spi, read_command, sizeof(read_command), + rxbuf, rxbuf_size); +} + +static int mpf_ops_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, const char *buf, + size_t count) +{ + const u8 program_mode[] = { MPF_SPI_FRAME_INIT, MPF_SPI_PRG_MODE }; + const u8 isc_en_command[] = { MPF_SPI_ISC_ENABLE }; + struct mpf_priv *priv = mgr->priv; + struct device *dev = &mgr->dev; + struct spi_device *spi; + u32 isc_ret = 0; + int ret; + + if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { + dev_err(dev, "Partial reconfiguration is not supported\n"); + return -EOPNOTSUPP; + } + + spi = priv->spi; + + ret = mpf_spi_write_then_read(spi, isc_en_command, sizeof(isc_en_command), + &isc_ret, sizeof(isc_ret)); + if (ret || isc_ret) { + dev_err(dev, "Failed to enable ISC: spi_ret %d, isc_ret %u\n", + ret, isc_ret); + return -EFAULT; + } + + ret = mpf_spi_write(spi, program_mode, sizeof(program_mode)); + if (ret) { + dev_err(dev, "Failed to enter program mode: %d\n", ret); + return ret; + } + + priv->program_mode = true; + + return 0; +} + +static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count) +{ + u8 spi_frame_command[] = { MPF_SPI_FRAME }; + struct spi_transfer xfers[2] = { 0 }; + struct mpf_priv *priv = mgr->priv; + struct device *dev = &mgr->dev; + struct spi_device *spi; + int ret, i; + + if (count % MPF_SPI_FRAME_SIZE) { + dev_err(dev, "Bitstream size is not a multiple of %d\n", + MPF_SPI_FRAME_SIZE); + return -EINVAL; + } + + spi = priv->spi; + + xfers[0].tx_buf = spi_frame_command; + xfers[0].len = sizeof(spi_frame_command); + + for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) { + xfers[1].tx_buf = buf + i * MPF_SPI_FRAME_SIZE; + xfers[1].len = MPF_SPI_FRAME_SIZE; + + ret = mpf_poll_status(spi, 0); + if (ret >= 0) + ret = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers)); + + if (ret) { + dev_err(dev, "Failed to write bitstream frame %d/%zu\n", + i, count / MPF_SPI_FRAME_SIZE); + return ret; + } + } + + return 0; +} + +static int mpf_ops_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + const u8 isc_dis_command[] = { MPF_SPI_ISC_DISABLE }; + const u8 release_command[] = { MPF_SPI_RELEASE }; + struct mpf_priv *priv = mgr->priv; + struct device *dev = &mgr->dev; + struct spi_device *spi; + int ret; + + spi = priv->spi; + + ret = mpf_spi_write(spi, isc_dis_command, sizeof(isc_dis_command)); + if (ret) { + dev_err(dev, "Failed to disable ISC: %d\n", ret); + return ret; + } + + usleep_range(1000, 2000); + + ret = mpf_spi_write(spi, release_command, sizeof(release_command)); + if (ret) { + dev_err(dev, "Failed to exit program mode: %d\n", ret); + return ret; + } + + priv->program_mode = false; + + return 0; +} + +static const struct fpga_manager_ops mpf_ops = { + .state = mpf_ops_state, + .initial_header_size = 71, + .parse_header = mpf_ops_parse_header, + .write_init = mpf_ops_write_init, + .write = mpf_ops_write, + .write_complete = mpf_ops_write_complete, +}; + +static int mpf_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct fpga_manager *mgr; + struct mpf_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->spi = spi; + + mgr = devm_fpga_mgr_register(dev, "Microchip Polarfire SPI FPGA Manager", + &mpf_ops, priv); + + return PTR_ERR_OR_ZERO(mgr); +} + +static const struct spi_device_id mpf_spi_ids[] = { + { .name = "mpf-spi-fpga-mgr", }, + {}, +}; +MODULE_DEVICE_TABLE(spi, mpf_spi_ids); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id mpf_of_ids[] = { + { .compatible = "microchip,mpf-spi-fpga-mgr" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpf_of_ids); +#endif /* IS_ENABLED(CONFIG_OF) */ + +static struct spi_driver mpf_driver = { + .probe = mpf_probe, + .id_table = mpf_spi_ids, + .driver = { + .name = "microchip_mpf_spi_fpga_mgr", + .of_match_table = of_match_ptr(mpf_of_ids), + }, +}; + +module_spi_driver(mpf_driver); + +MODULE_DESCRIPTION("Microchip Polarfire SPI FPGA Manager"); +MODULE_LICENSE("GPL"); -- 2.35.1