Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Heiko Stuebner <heiko@sntech.de>
To:     Peter Geis <pgwipeout@gmail.com>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Michael Riesch <michael.riesch@wolfvision.net>,
        devicetree <devicetree@vger.kernel.org>,
        arm-mail-list <linux-arm-kernel@lists.infradead.org>,
        "open list:ARM/Rockchip SoC..." <linux-rockchip@lists.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: rockchip: Fix SoQuartz CM4IO usb
Date:   Sat, 11 Jun 2022 16:59:53 +0200
Message-ID: <8819229.G0QQBjFxQf@phil>
In-Reply-To: <CAMdYzYqRcrawKc-GsTgwnPuJBJoKTn9Arfpj_Vjnt+3DeT7k9w@mail.gmail.com>
References: <20220610132601.160088-1-pgwipeout@gmail.com> <4178848.3VsfAaAtOV@phil> <CAMdYzYqRcrawKc-GsTgwnPuJBJoKTn9Arfpj_Vjnt+3DeT7k9w@mail.gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
Precedence: bulk

Am Samstag, 11. Juni 2022, 15:53:41 CEST schrieb Peter Geis:
> On Sat, Jun 11, 2022 at 9:50 AM Heiko Stuebner <heiko@sntech.de> wrote:
> >
> > Am Freitag, 10. Juni 2022, 16:44:23 CEST schrieb Peter Geis:
> > > On Fri, Jun 10, 2022 at 9:26 AM Peter Geis <pgwipeout@gmail.com> wrote:
> > > >
> > > > The SoQuartz CM4-IO should support otg mode, however it currently
> > > > defaults to device mode when otg is enabled. Force it to host mode to
> > > > retain the previous behavior.
> > >
> > > It would seem the role-switch issue is more widespread than originally
> > > thought, affecting other boards where automatic control should work.
> > > Please hold this patch while I investigate further.
> >
> > ok!
> >
> > I guess this also applies to
> >         "arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior"?
> 
> No, on Quartz64 Model A it can't work, the requisite pin isn't connected.

ok, so I can pick that other patch up :-) .

> I think I've found the problem, I've requested a few people to test a fix.
> Do you have a Model B or SoQuartz to test against (or any other rk356x
> board that has the id pin hooked up)?

The rk356x in my boardfarm is a Quartz-B ... though an very early model,
so hopefully nothing changed on the board since then.

Although there is nothing connected to usb right now and I only have
remote access this weekend, so any usb tests would need to wait till next
week on my end.


Heiko


> 
> Thanks,
> Peter
> 
> >
> >
> > Heiko
> >
> >
> > > >
> > > > Fixes: bc405bb3eeee ("arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x")
> > > >
> > > > Signed-off-by: Peter Geis <pgwipeout@gmail.com>
> > > > ---
> > > >  arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
> > > > index e00568a6be5c..56764fae9f9d 100644
> > > > --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
> > > > +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
> > > > @@ -169,6 +169,7 @@ &usb2phy0_otg {
> > > >  };
> > > >
> > > >  &usb_host0_xhci {
> > > > +       dr_mode = "host";
> > > >         status = "okay";
> > > >  };
> > > >
> > > > --
> > > > 2.25.1
> > > >
> > >
> >
> >
> >
> >
>