Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Uladzislau Rezki <urezki@gmail.com>
Date:   Mon, 13 Jun 2022 11:47:24 +0200
To:     Joel Fernandes <joel@joelfernandes.org>,
        "Paul E. McKenney" <paulmck@kernel.org>
Cc:     Uladzislau Rezki <urezki@gmail.com>,
        "Paul E. McKenney" <paulmck@kernel.org>,
        LKML <linux-kernel@vger.kernel.org>, RCU <rcu@vger.kernel.org>,
        Frederic Weisbecker <frederic@kernel.org>,
        Neeraj Upadhyay <neeraj.iitr10@gmail.com>,
        Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Subject: Re: [PATCH 2/2] rcu/kvfree: Introduce KFREE_DRAIN_JIFFIES_[MAX/MIN]
 interval
Message-ID: <YqcHrIMefthWe0t4@pc638.lan>
References: <20220602080644.432156-1-urezki@gmail.com>
 <20220602080644.432156-2-urezki@gmail.com>
 <20220604155108.GU1790663@paulmck-ThinkPad-P17-Gen-1>
 <YpxzB3/HRN/EEHa8@pc638.lan>
 <20220607034710.GE1790663@paulmck-ThinkPad-P17-Gen-1>
 <CA+KHdyXU1apQQbVVZ_zX7o86Qp-AQnif2u8aJFULqHNtfCGcSA@mail.gmail.com>
 <YqN1QqRmPpchDm/k@google.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <YqN1QqRmPpchDm/k@google.com>
Precedence: bulk

Hello, Joel, Paul.

> Hi Vlad, Paul,
> 
> On Thu, Jun 09, 2022 at 03:10:57PM +0200, Uladzislau Rezki wrote:
> > On Tue, Jun 7, 2022 at 5:47 AM Paul E. McKenney <paulmck@kernel.org> wrote:
> > >
> > > On Sun, Jun 05, 2022 at 11:10:31AM +0200, Uladzislau Rezki wrote:
> > > > > On Thu, Jun 02, 2022 at 10:06:44AM +0200, Uladzislau Rezki (Sony) wrote:
> > > > > > Currently the monitor work is scheduled with a fixed interval that
> > > > > > is HZ/20 or each 50 milliseconds. The drawback of such approach is
> > > > > > a low utilization of page slot in some scenarios. The page can store
> > > > > > up to 512 records. For example on Android system it can look like:
> > > > > >
> > > > > > <snip>
> > > > > >   kworker/3:0-13872   [003] .... 11286.007048: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000026522604 nr_records=1
> > > > > >   kworker/3:0-13872   [003] .... 11286.015638: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000095ed6fca nr_records=2
> > > > > >   kworker/1:2-20434   [001] .... 11286.051230: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044872ffd nr_records=1
> > > > > >   kworker/1:2-20434   [001] .... 11286.059322: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000026522604 nr_records=2
> > > > > >   kworker/0:1-20052   [000] .... 11286.095295: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044872ffd nr_records=2
> > > > > >   kworker/0:1-20052   [000] .... 11286.103418: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000cbcf05db nr_records=1
> > > > > >   kworker/2:3-14372   [002] .... 11286.135155: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000095ed6fca nr_records=2
> > > > > >   kworker/2:3-14372   [002] .... 11286.135198: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044872ffd nr_records=1
> > > > > >   kworker/1:2-20434   [001] .... 11286.155377: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000cbcf05db nr_records=5
> > > > > >   kworker/2:3-14372   [002] .... 11286.167181: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000026522604 nr_records=5
> > > > > >   kworker/1:2-20434   [001] .... 11286.179202: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000008ef95e14 nr_records=1
> > > > > >   kworker/2:3-14372   [002] .... 11286.187398: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000c597d297 nr_records=6
> > > > > >   kworker/3:0-13872   [003] .... 11286.187445: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000050bf92e2 nr_records=3
> > > > > >   kworker/1:2-20434   [001] .... 11286.198975: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000cbcf05db nr_records=4
> > > > > >   kworker/1:2-20434   [001] .... 11286.207203: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000095ed6fca nr_records=4
> > > > > > <snip>
> > > > > >
> > > > > > where a page only carries few records to reclaim a memory. In order to
> > > > > > improve batching and make utilization more efficient the patch introduces
> > > > > > a drain interval that can be set either to KFREE_DRAIN_JIFFIES_MAX or
> > > > > > KFREE_DRAIN_JIFFIES_MIN. It is adjusted if a flood is detected, in this
> > > > > > case a memory reclaim occurs more often whereas in mostly idle cases the
> > > > > > interval is set to its maximum timeout that improves the utilization of
> > > > > > page slots.
> > > > > >
> > > > > > Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
> > > > >
> > > > > That does look like a problem well worth solving!
> > > > >
> > > > Agree, better ideas make better final solution :)
> > > >
> > > > >
> > > > > But I am missing one thing. If we are having a callback flood, why do we
> > > > > need a shorter timeout?
> > > > >
> > > > To offload faster, because otherwise we run into classical issue, it is a low
> > > > memory condition state resulting in OOM.
> > >
> > > But doesn't each callback queued during the flood give us an opportunity
> > > to react to the flood?  That will be way more fine-grained than any
> > > reasonable timer, right?  Or am I missing something?
> > >
> > We can set the timer to zero or to current "jiffies" to initiate the
> > offloading if the
> > page is full. In that sense probably it make sense to propagate those two attr.
> > to user space, so the user can configure min/max drain interval.
> > 
> > Or we can only deal with fixed interval exposed via sysfs to control it by user.
> > In that case we can get rid of MIN one and just trigger a timer if the page is
> > full. I think this approach is better.
> 
> Yes I also think triggering timer with zero-timeout is better. Can you (Vlad)
> accomplish that by just calling the timer callback inline, instead of queuing
> a timer? I imagine you would just do queue_work() instead of
> queue_delayed_work() in this scenario.
> 
> > > I do agree that the action would often need to be indirect to avoid the
> > > memory-allocation-state hassles, but we already can do that, either via
> > > an extremely short-term hrtimer or something like irq-work.
> > >
> > > > > Wouldn't a check on the number of blocks queued be simpler, more direct,
> > > > > and provide faster response to the start of a callback flood?
> > > > >
> > > > I rely on krcp->count because not always we can store the pointer in the page
> > > > slots. We can not allocate a page in the caller context thus we use page-cache
> > > > worker that fills the cache in normal context. While it populates the cache,
> > > > pointers temporary are queued to the linked-list.
> > > >
> > > > Any thoughts?
> > >
> > > There are a great many ways to approach this.  One of them is to maintain
> > > a per-CPU free-running counter of kvfree_rcu() calls, and to reset this
> > > counter each jiffy.
> > >
> > > Or am I missing a trick here?
> > >
> > Do you mean to have a per-cpu timer that checks the per-cpu-freed counter
> > and schedule the work when if it is needed? Or i have missed your point?
> 
> I think he (Paul) is describing the way 'flood detection' can work similar to how the
> bypass list code is implemented. There he maintains a count which only if
> exceeds a limit, will queue on to the bypass list.
> 
OK, i see that. We also do similar thing. We say it is a flood - when a
page becomes full, so it is kind of threshold that we pass.

> This code:
> 
>         // If we have advanced to a new jiffy, reset counts to allow
>         // moving back from ->nocb_bypass to ->cblist.
>         if (j == rdp->nocb_nobypass_last) {
>                 c = rdp->nocb_nobypass_count + 1;
>         } else {
>                 WRITE_ONCE(rdp->nocb_nobypass_last, j);
>                 c = rdp->nocb_nobypass_count - nocb_nobypass_lim_per_jiffy;
>                 if (ULONG_CMP_LT(rdp->nocb_nobypass_count,
>                                  nocb_nobypass_lim_per_jiffy))
>                         c = 0;
>                 else if (c > nocb_nobypass_lim_per_jiffy)
>                         c = nocb_nobypass_lim_per_jiffy;
>         }
>         WRITE_ONCE(rdp->nocb_nobypass_count, c);
> 
> 
> Your (Vlad's) approach OTOH is also fine to me, you check if page is full and
> make that as a 'flood is happening' detector.
> 
OK, thank you Joel. I also think, that way we improve batching and utilization
of the page what is actually an intention of the patch in question.

--
Uladzislau Rezki