Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Satya Priya <quic_c_skakit@quicinc.com>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>
CC:     Lee Jones <lee.jones@linaro.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <swboyd@chromium.org>,
        <quic_collinsd@quicinc.com>, <quic_subbaram@quicinc.com>,
        <quic_jprakash@quicinc.com>,
        Satya Priya <quic_c_skakit@quicinc.com>
Subject: [PATCH V15 4/9] mfd: pm8008: Add reset-gpios
Date:   Tue, 14 Jun 2022 15:18:26 +0530
Message-ID: <1655200111-18357-5-git-send-email-quic_c_skakit@quicinc.com>
In-Reply-To: <1655200111-18357-1-git-send-email-quic_c_skakit@quicinc.com>
References: <1655200111-18357-1-git-send-email-quic_c_skakit@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add the reset-gpio toggling in the pm8008_probe() to bring
pm8008 chip out of reset instead of doing it in DT node using
"output-high" property.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
Changes in V15:
 - None.

Changes in V14:
 - None.

Changes in V13:
 - None.

 drivers/mfd/qcom-pm8008.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
index c472d7f..5a670b0 100644
--- a/drivers/mfd/qcom-pm8008.c
+++ b/drivers/mfd/qcom-pm8008.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/bitops.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -221,6 +222,7 @@ static int pm8008_probe(struct i2c_client *client)
 {
 	int rc;
 	struct pm8008_data *chip;
+	struct gpio_desc *reset_gpio;
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 	if (!chip)
@@ -233,6 +235,10 @@ static int pm8008_probe(struct i2c_client *client)
 
 	i2c_set_clientdata(client, chip);
 
+	reset_gpio = devm_gpiod_get(chip->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(reset_gpio))
+		return PTR_ERR(reset_gpio);
+
 	if (of_property_read_bool(chip->dev->of_node, "interrupt-controller")) {
 		rc = pm8008_probe_irq_peripherals(chip, client->irq);
 		if (rc)
-- 
2.7.4