Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Laurent Dufour <ldufour@linux.ibm.com>
To:     mpe@ellerman.id.au, benh@kernel.crashing.org, paulus@samba.org,
        nathanl@linux.ibm.com, haren@linux.vnet.ibm.com, npiggin@gmail.com
Cc:     linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/4] Extending NMI watchdog during LPM
Date:   Tue, 14 Jun 2022 15:54:10 +0200
Message-Id: <20220614135414.37746-1-ldufour@linux.ibm.com>
Content-Transfer-Encoding: 8bit
MIME-Version: 1.0
Precedence: bulk

When a partition is transferred, once it arrives at the destination node,
the partition is active but much of its memory must be transferred from the
start node.

It depends on the activity in the partition, but the more CPU the partition
has, the more memory to be transferred is likely to be. This causes latency
when accessing pages that need to be transferred, and often, for large
partitions, it triggers the NMI watchdog.

The NMI watchdog causes the CPU stack to dump where it appears to be
stuck. In this case, it does not bring much information since it can happen
during any memory access of the kernel.

In addition, the NMI interrupt mechanism is not secure and can generate a
dump system in the event that the interruption is taken while MSR[RI]=0.

Depending on the LPAR size and load, it may be interesting to extend the
NMI watchdog timer during the LPM.

That's configurable through sysctl with the new introduced variable
(specific to powerpc) lpm_nmi_watchdog_factor. This value represents the
percentage added to watchdog_tresh to set the NMI watchdog timeout during a
LPM.

Changes in v2:
 - introduce a timer factor.

v1:
[PATCH 0/2] Disabling NMI watchdog during LPM's memory transfer
https://lore.kernel.org/linuxppc-dev/20220601155315.35109-1-ldufour@linux.ibm.com/#r

Laurent Dufour (4):
  powerpc/mobility: Wait for memory transfer to complete
  watchdog: export watchdog_mutex and lockup_detector_reconfigure
  powerpc/watchdog: introduce a LPM factor
  pseries/mobility: Set NMI watchdog factor during LPM

 Documentation/admin-guide/sysctl/kernel.rst | 12 +++
 arch/powerpc/include/asm/nmi.h              |  2 +
 arch/powerpc/kernel/watchdog.c              | 22 ++++-
 arch/powerpc/platforms/pseries/mobility.c   | 90 ++++++++++++++++++++-
 include/linux/nmi.h                         |  3 +
 kernel/watchdog.c                           |  6 +-
 6 files changed, 129 insertions(+), 6 deletions(-)

-- 
2.36.1