Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Ivan Bornyakov <i.bornyakov@metrotek.ru>
To:     mdf@kernel.org, hao.wu@intel.com, yilun.xu@intel.com,
        trix@redhat.com, corbet@lwn.net
Cc:     Ivan Bornyakov <i.bornyakov@metrotek.ru>,
        Conor.Dooley@microchip.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-fpga@vger.kernel.org,
        devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
        linux-kernel@vger.kernel.org, system@metrotek.ru
Subject: [PATCH v19 2/4] docs: fpga: mgr: document parse_header() callback
Date:   Wed, 15 Jun 2022 14:01:35 +0300
Message-Id: <20220615110137.21902-3-i.bornyakov@metrotek.ru>
In-Reply-To: <20220615110137.21902-1-i.bornyakov@metrotek.ru>
References: <20220615110137.21902-1-i.bornyakov@metrotek.ru>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Document newly introduced fpga_manager_ops callback parse_header() along
with header_size and data_size fields of struct fpga_image_info.

Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
---
 Documentation/driver-api/fpga/fpga-mgr.rst | 31 ++++++++++++++++------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst
index 42c01f396dce..f1e106c3194c 100644
--- a/Documentation/driver-api/fpga/fpga-mgr.rst
+++ b/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -79,14 +79,29 @@ do the programming sequence for this particular FPGA.  These ops return 0 for
 success or negative error codes otherwise.
 
 The programming sequence is::
- 1. .write_init
- 2. .write or .write_sg (may be called once or multiple times)
- 3. .write_complete
-
-The .write_init function will prepare the FPGA to receive the image data.  The
-buffer passed into .write_init will be at most .initial_header_size bytes long;
-if the whole bitstream is not immediately available then the core code will
-buffer up at least this much before starting.
+ 1. .parse_header (optional, may be called once or multiple times)
+ 2. .write_init
+ 3. .write or .write_sg (may be called once or multiple times)
+ 4. .write_complete
+
+The .parse_header function will set header_size and data_size to
+struct fpga_image_info. If header_size is set, .write function will get image
+buffer starting at header_size offset from the beginning. If data_size is set,
+.write function will get data_size bytes of the image buffer, otherwise .write
+will get data up to the end of image buffer. This will not affect .write_sg,
+.write_sg will still get whole image in sg_table form. If FPGA image is
+already mapped as a single contiguous buffer, whole buffer will be passed into
+.parse_header. If image is in scatter-gather form, core code will buffer up at
+least .initial_header_size before the first call of .parse_header, if it is
+not enough, .parse_header should set desired size into info->header_size and
+return -EAGAIN, then it will be called again with greater part of image buffer
+on the input.
+
+The .write_init function will prepare the FPGA to receive the image data. The
+buffer passed into .write_init will be at least info->header_size bytes long,
+if it's defined, otherwise .initial_header_size; if the whole bitstream is not
+immediately available then the core code will buffer up at least this much
+before starting.
 
 The .write function writes a buffer to the FPGA. The buffer may be contain the
 whole FPGA image or may be a smaller chunk of an FPGA image.  In the latter
-- 
2.35.1