Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Prashant Malani <pmalani@chromium.org>
To:     linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Cc:     bleung@chromium.org, swboyd@chromium.org,
        heikki.krogerus@linux.intel.com,
        Pin-Yen Lin <treapking@chromium.org>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>,
        =?UTF-8?q?N=C3=ADcolas=20F=20=2E=20R=20=2E=20A=20=2E=20Prado?= 
        <nfraprado@collabora.com>, Prashant Malani <pmalani@chromium.org>,
        Andrzej Hajda <andrzej.hajda@intel.com>,
        Daniel Vetter <daniel@ffwll.ch>,
        David Airlie <airlied@linux.ie>,
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        dri-devel@lists.freedesktop.org (open list:DRM DRIVERS),
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Hsin-Yi Wang <hsinyi@chromium.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Jonas Karlman <jonas@kwiboo.se>,
        =?UTF-8?q?Jos=C3=A9=20Exp=C3=B3sito?= <jose.exposito89@gmail.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Maxime Ripard <maxime@cerno.tech>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Robert Foss <robert.foss@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Sam Ravnborg <sam@ravnborg.org>,
        Thomas Zimmermann <tzimmermann@suse.de>,
        Xin Ji <xji@analogixsemi.com>
Subject: [PATCH v4 7/7] drm/bridge: anx7625: Add typec_mux_set callback function
Date:   Wed, 15 Jun 2022 17:20:23 +0000
Message-Id: <20220615172129.1314056-8-pmalani@chromium.org>
In-Reply-To: <20220615172129.1314056-1-pmalani@chromium.org>
References: <20220615172129.1314056-1-pmalani@chromium.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Pin-Yen Lin <treapking@chromium.org>

Add the callback function when the driver receives state
changes of the Type-C port. The callback function configures the
crosspoint switch of the anx7625 bridge chip, which can change the
output pins of the signals according to the port state.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
---

Changes since v3:
- Added Reviewed-by tag from Angelo.

Changes since v2:
- Moved num_typec_switches check to beginning of function
- Made dp_connected assignments fit on one line (and removed unnecessary
  parentheses)
- Added Reviewed-by and Tested-by tags.

Changes since v1:
- No changes.

 drivers/gpu/drm/bridge/analogix/anx7625.c | 56 +++++++++++++++++++++++
 drivers/gpu/drm/bridge/analogix/anx7625.h | 13 ++++++
 2 files changed, 69 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index bd21f159b973..5992fc8beeeb 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -15,6 +15,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/usb/typec_dp.h>
 #include <linux/usb/typec_mux.h>
 #include <linux/workqueue.h>
 
@@ -2582,9 +2583,64 @@ static void anx7625_runtime_disable(void *data)
 	pm_runtime_disable(data);
 }
 
+static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
+					  enum typec_orientation orientation)
+{
+	if (orientation == TYPEC_ORIENTATION_NORMAL) {
+		anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
+				  SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
+		anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
+				  SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
+	} else if (orientation == TYPEC_ORIENTATION_REVERSE) {
+		anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
+				  SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
+		anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
+				  SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
+	}
+}
+
+static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
+{
+	if (ctx->typec_ports[0].dp_connected && ctx->typec_ports[1].dp_connected)
+		/* Both ports available, do nothing to retain the current one. */
+		return;
+	else if (ctx->typec_ports[0].dp_connected)
+		anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
+	else if (ctx->typec_ports[1].dp_connected)
+		anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
+}
+
 static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
 				 struct typec_mux_state *state)
 {
+	struct anx7625_port_data *data = typec_mux_get_drvdata(mux);
+	struct anx7625_data *ctx = data->ctx;
+	struct device *dev = &ctx->client->dev;
+	bool new_dp_connected, old_dp_connected;
+
+	if (ctx->num_typec_switches == 1)
+		return 0;
+
+	old_dp_connected = ctx->typec_ports[0].dp_connected || ctx->typec_ports[1].dp_connected;
+
+	dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n",
+		ctx->typec_ports[0].dp_connected, ctx->typec_ports[1].dp_connected);
+
+	data->dp_connected = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
+			      state->alt->mode == USB_TYPEC_DP_MODE);
+
+	new_dp_connected = ctx->typec_ports[0].dp_connected || ctx->typec_ports[1].dp_connected;
+
+	/* dp on, power on first */
+	if (!old_dp_connected && new_dp_connected)
+		pm_runtime_get_sync(dev);
+
+	anx7625_typec_two_ports_update(ctx);
+
+	/* dp off, power off last */
+	if (old_dp_connected && !new_dp_connected)
+		pm_runtime_put_sync(dev);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
index 76cfc64f7574..7d6c6fdf9a3a 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.h
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
@@ -55,6 +55,18 @@
 #define HPD_STATUS_CHANGE 0x80
 #define HPD_STATUS 0x80
 
+#define TCPC_SWITCH_0 0xB4
+#define SW_SEL1_DPTX0_RX2 BIT(0)
+#define SW_SEL1_DPTX0_RX1 BIT(1)
+#define SW_SEL1_SSRX_RX2 BIT(4)
+#define SW_SEL1_SSRX_RX1 BIT(5)
+
+#define TCPC_SWITCH_1 0xB5
+#define SW_SEL2_DPTX1_TX2 BIT(0)
+#define SW_SEL2_DPTX1_TX1 BIT(1)
+#define SW_SEL2_SSTX_TX2 BIT(4)
+#define SW_SEL2_SSTX_TX1 BIT(5)
+
 /******** END of I2C Address 0x58 ********/
 
 /***************************************************************/
@@ -444,6 +456,7 @@ struct anx7625_i2c_client {
 };
 
 struct anx7625_port_data {
+	bool dp_connected;
 	struct typec_mux_dev *typec_mux;
 	struct anx7625_data *ctx;
 };
-- 
2.36.1.476.g0c4daa206d-goog