Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <fec70c93-960d-711b-b6a1-ffc8ba23dfdb@gmail.com>
Date:   Fri, 17 Jun 2022 15:06:46 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.10.0
Subject: Re: [PATCH v3 3/4] tty: serial: atmel: remove enable/disable clock
 due to atmel_console_setup()
Content-Language: fr-FR
To:     Claudiu Beznea <claudiu.beznea@microchip.com>,
        richard.genoud@gmail.com, gregkh@linuxfoundation.org,
        jirislaby@kernel.org, nicolas.ferre@microchip.com,
        alexandre.belloni@bootlin.com, patrice.chotard@foss.st.com
Cc:     linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
References: <20220616140024.2081238-1-claudiu.beznea@microchip.com>
 <20220616140024.2081238-4-claudiu.beznea@microchip.com>
From:   Richard Genoud <richard.genoud@gmail.com>
In-Reply-To: <20220616140024.2081238-4-claudiu.beznea@microchip.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk


Le 16/06/2022 à 16:00, Claudiu Beznea a écrit :
> There is no need for clk_prepare_enable() at the beginning of
> atmel_console_setup() and clk_disable_unprepare() at the end of
> atmel_console_setup() as the clock is already enabled when calling
> atmel_console_setup() and its disablement is done at the end
> of probe.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>

> ---
>   drivers/tty/serial/atmel_serial.c | 16 ----------------
>   1 file changed, 16 deletions(-)
> 
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index 4cec97fd7241..3a94c2bdda72 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -2617,7 +2617,6 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
>   
>   static int __init atmel_console_setup(struct console *co, char *options)
>   {
> -	int ret;
>   	struct uart_port *port = &atmel_ports[co->index].uart;
>   	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
>   	int baud = 115200;
> @@ -2630,10 +2629,6 @@ static int __init atmel_console_setup(struct console *co, char *options)
>   		return -ENODEV;
>   	}
>   
> -	ret = clk_prepare_enable(atmel_ports[co->index].clk);
> -	if (ret)
> -		return ret;
> -
>   	atmel_uart_writel(port, ATMEL_US_IDR, -1);
>   	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
>   	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
> @@ -2914,17 +2909,6 @@ static int atmel_serial_probe(struct platform_device *pdev)
>   	if (ret)
>   		goto err_add_port;
>   
> -#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
> -	if (uart_console(&atmel_port->uart)
> -			&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
> -		/*
> -		 * The serial core enabled the clock for us, so undo
> -		 * the clk_prepare_enable() in atmel_console_setup()
> -		 */
> -		clk_disable_unprepare(atmel_port->clk);
> -	}
> -#endif
> -
>   	device_init_wakeup(&pdev->dev, 1);
>   	platform_set_drvdata(pdev, atmel_port);
>   
Thanks !