Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758847AbXEWXR1 (ORCPT ); Wed, 23 May 2007 19:17:27 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756633AbXEWXRS (ORCPT ); Wed, 23 May 2007 19:17:18 -0400 Received: from threatwall.zlynx.org ([199.45.143.218]:33475 "EHLO zlynx.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755287AbXEWXRP (ORCPT ); Wed, 23 May 2007 19:17:15 -0400 Subject: Re: 2.6.22-rc2-mm1 From: Zan Lynx To: Andrew Morton Cc: linux-kernel@vger.kernel.org In-Reply-To: <20070523004233.5ae5f6fd.akpm@linux-foundation.org> References: <20070523004233.5ae5f6fd.akpm@linux-foundation.org> Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-L0f96yUoHGCiIraEQU3d" Date: Wed, 23 May 2007 17:17:09 -0600 Message-Id: <1179962229.8575.4.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.10.1 X-Envelope-From: zlynx@acm.org Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 51759 Lines: 1242 --=-L0f96yUoHGCiIraEQU3d Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable On Wed, 2007-05-23 at 00:42 -0700, Andrew Morton wrote:=20 > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc2/= 2.6.22-rc2-mm1/ >=20 > - A new readahead patch series. This needs serious review and performanc= e > testing please. >=20 > - Added Ingo's CFS CPU scheduler >=20 > - Xen dom-U support is now in the x86 tree. I am having weird problems with USB keyboard and mouse. The USB keyboard will drop keystrokes, but not all of them. The mouse seems to move fine but drops clicks. Could be that an occasional missed move event isn't noticeable. Nothing is logged when a key is dropped. However, I did have some of this when it was first booting: BUG: at drivers/hid/hid-core.c:778 implement() Call Trace: [] :hid:hid_output_report+0x1dc/0x270 [] :usbhid:hid_submit_ctrl+0x7a/0x260 [] :usbhid:usbhid_submit_report+0x11e/0x200 [] :usbhid:hiddev_ioctl+0x3e2/0xae0 [] do_page_fault+0x42e/0x880 [] do_ioctl+0x7d/0xa0 [] vfs_ioctl+0x221/0x2d0 [] trace_hardirqs_on+0xc1/0x160 [] sys_ioctl+0x49/0x80 [] system_call+0x7e/0x83 Here's the entire dmesg: Linux version 2.6.22-rc2-mm1 (root@zephyr) (gcc version 4.2.0 (Gentoo 4.2.0= )) #1 SMP PREEMPT Wed May 23 14:06:56 MDT 2007 Command line: root=3D/dev/sda2 rootfstype=3Dreiser4 ro i8042.nomux elevator= =3Dcfq resume=3D/dev/sda3 panic=3D5 nmi_watchdog=3D1,panic debug kernelcore= =3D512M BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) BIOS-e820: 000000003ff70000 - 000000003ff7f000 (ACPI data) BIOS-e820: 000000003ff7f000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 262000) 1 entries of 256 used end_pfn_map =3D 1048576 DMI present. ACPI: RSDP 000F7240, 0014 (r0 PTLTD ) ACPI: RSDT 3FF7A87E, 0034 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 3FF7EE13, 0074 (r1 NVIDIA CK8 6040000 PTL_ F4240) ACPI: DSDT 3FF7A8B2, 4561 (r1 NVIDIA CK8 6040000 MSFT 100000E) ACPI: FACS 3FF7FFC0, 0040 ACPI: APIC 3FF7EE87, 005A (r1 NVIDIA NV_APIC_ 6040000 LTP 0) ACPI: BOOT 3FF7EEE1, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 3FF7EF09, 00F7 (r1 PTLTD POWERNOW 6040000 LTP 1) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 262000) 1 entries of 256 used No mptable found. sizeof(struct page) =3D 88 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node Node 0: 132096 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 262000 On node 0 totalpages: 261903 Node 0 memmap at 0xffff810001000000 size 23068672 first pfn 0xffff810001000= 000 DMA zone: 88 pages used for memmap DMA zone: 2778 pages reserved DMA zone: 1133 pages, LIFO batch:0 DMA32 zone: 2750 pages used for memmap DMA32 zone: 125250 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 2790 pages used for memmap Movable zone: 127114 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a000= 0 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d000= 0 swsusp: Registered nosave memory region: 00000000000d0000 - 000000000010000= 0 Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) SMP: Allowing 1 CPUs, 0 hotplug CPUs PERCPU: Allocating 32392 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 253497 Kernel command line: root=3D/dev/sda2 rootfstype=3Dreiser4 ro i8042.nomux e= levator=3Dcfq resume=3D/dev/sda3 panic=3D5 nmi_watchdog=3D1,panic debug ker= nelcore=3D512M Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2194.363 MHz processor. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1648 kB per task-struct memory footprint: 1680 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------= - | spin |wlock |rlock |mutex | wsem | rsem = | -------------------------------------------------------------------------= - A-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok = | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok = | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok = | double unlock: ok | ok | ok | ok | ok | ok = | initialize held: ok | ok | ok | ok | ok | ok = | bad unlock order: ok | ok | ok | ok | ok | ok = | -------------------------------------------------------------------------= - recursive read-lock: | ok | | ok = | recursive read-lock #2: | ok | | ok = | mixed read-write-lock: | ok | | ok = | mixed write-read-lock: | ok | | ok = | -------------------------------------------------------------------------= - hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A =3D> hirqs-on/12: ok | ok | ok | sirq-safe-A =3D> hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ e8000000 size 128 MB Memory: 1011976k/1048000k available (3300k kernel code, 35344k reserved, 21= 76k data, 1100k init) SLUB: Genslabs=3D23, HWalign=3D64, Order=3D0-3, MinObjects=3D16, Processors= =3D1, Nodes=3D1 Calibrating delay using timer specific routine.. 4390.50 BogoMIPS (lpj=3D21= 95251) kswapd reclaim order set to 3 Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) SMP alternatives: switching to UP code Freeing SMP alternatives: 25k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 650 Objects with 66 Devices 205 Methods 24 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 3 Objects with 0 Devices 1 Methods 0 Regions tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquire= d evxfevnt-0091 [02] enable : Transition to ACPI mode successf= ul activating NMI Watchdog ... done. Using local APIC timer interrupts. result 12467973 Detected 12.467 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! PM: Adding info for No Bus:platform NET: Registered protocol family 16 No dock devices found. PM: Adding info for No Bus:vtcon0 ACPI: bus type pci registered PM: Adding info for No Bus:id BUG: at include/linux/slub_def.h:83 kmalloc_index() Call Trace: [] get_slab+0xb9/0x180 [] kfree+0xc5/0x110 [] __kmalloc+0x24/0xc0 [] get_modalias+0x68/0x120 [] dmi_dev_uevent+0x37/0x60 [] dev_uevent+0x163/0x220 [] kobject_uevent_env+0x2b7/0x500 [] bus_add_device+0x20/0x140 [] device_add+0x4a2/0x5b0 [] dmi_id_init+0x2cb/0x2f0 [] kernel_init+0x156/0x330 [] trace_hardirqs_on_thunk+0x35/0x37 [] trace_hardirqs_on+0xc1/0x160 [] child_rip+0xa/0x12 [] restore_args+0x0/0x30 [] vgacon_cursor+0x0/0x1f0 [] release_console_sem+0x4b/0x230 [] kernel_init+0x0/0x330 [] child_rip+0x0/0x12 PCI: Using configuration type 1 evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on in= t 0x9 PM: Adding info for acpi:device:0e PM: Adding info for acpi:device:10 PM: Adding info for acpi:device:11 PM: Adding info for acpi:device:12 PM: Adding info for acpi:device:13 PM: Adding info for acpi:device:14 PM: Adding info for acpi:device:15 PM: Adding info for acpi:ACPI0003:00 PM: Adding info for acpi:PNP0C02:00 PM: Adding info for acpi:PNP0C01:00 PM: Adding info for acpi:PNP0C09:00 PM: Adding info for acpi:PNP0C0A:00 PM: Adding info for acpi:PNP0C02:01 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:PNP0800:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:PNP0303:00 PM: Adding info for acpi:PNP0F13:00 PM: Adding info for acpi:PNP0A05:00 PM: Adding info for acpi:PNP0700:00 PM: Adding info for acpi:PNP0401:00 PM: Adding info for acpi:device:16 PM: Adding info for acpi:device:17 PM: Adding info for acpi:device:18 PM: Adding info for acpi:video:00 PM: Adding info for acpi:device:19 PM: Adding info for acpi:device:1a PM: Adding info for acpi:device:1b PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:07 PM: Adding info for acpi:PNP0C0F:08 PM: Adding info for acpi:PNP0C0F:09 PM: Adding info for acpi:PNP0C0F:0a PM: Adding info for acpi:PNP0C0F:0b PM: Adding info for acpi:PNP0C0F:0c PM: Adding info for acpi:PNP0C0F:0d PM: Adding info for acpi:thermal:00 PM: Adding info for acpi:thermal:01 ACPI: PCI Root Bridge [PCI0] (0000:00) PM: Adding info for No Bus:pci0000:00 PCI: Bus #03 (-#06) is hidden behind bridge #02 (-#02) (try 'pci=3Dassign-= busses') Please report the result to linux-kernel to fix this permanently PCI: Bus #07 (-#0a) is hidden behind bridge #02 (-#02) (try 'pci=3Dassign-= busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:01.1 PM: Adding info for pci:0000:00:02.0 PM: Adding info for pci:0000:00:02.1 PM: Adding info for pci:0000:00:02.2 PM: Adding info for pci:0000:00:06.0 PM: Adding info for pci:0000:00:06.1 PM: Adding info for pci:0000:00:08.0 PM: Adding info for pci:0000:00:0a.0 PM: Adding info for pci:0000:00:0b.0 PM: Adding info for pci:0000:00:18.0 PM: Adding info for pci:0000:00:18.1 PM: Adding info for pci:0000:00:18.2 PM: Adding info for pci:0000:00:18.3 PM: Adding info for pci:0000:02:00.0 PM: Adding info for pci:0000:02:01.0 PM: Adding info for pci:0000:02:02.0 PM: Adding info for pci:0000:02:04.0 PM: Adding info for pci:0000:02:04.1 PM: Adding info for pci:0000:02:04.2 PM: Adding info for pci:0000:01:00.0 ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0 ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0 ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0 ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0 ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 ACPI: bus type pnp registered PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a PM: Adding info for pnp:00:0b pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered Generic PHY: Registered new driver SCSI subsystem initialized libata version 2.21 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport PCI: Cannot allocate resource region 0 of device 0000:00:00.0 agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. PM: Adding info for No Bus:agpgart agpgart: AGP aperture is 128M @ 0xe8000000 pnp: 00:01: ioport range 0x8000-0x807f has been reserved pnp: 00:01: ioport range 0x8080-0x80ff has been reserved pnp: 00:01: ioport range 0x8400-0x847f has been reserved pnp: 00:01: ioport range 0x8480-0x84ff has been reserved pnp: 00:01: ioport range 0x8800-0x887f has been reserved pnp: 00:01: ioport range 0x8880-0x88ff has been reserved pnp: 00:01: ioport range 0x2040-0x207f has been reserved Time: tsc clocksource has been installed. pnp: 00:01: ioport range 0x2000-0x203f has been reserved pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved pnp: 00:02: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:02: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:02: iomem range 0xfed00000-0xfed00fff has been reserved PM: Adding info for No Bus:mem PM: Adding info for No Bus:kmem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg PCI: Failed to allocate mem resource #10:4000000@e4000000 for 0000:02:04.0 PCI: Failed to allocate mem resource #10:4000000@e4000000 for 0000:02:04.1 PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 50000000-53ffffff PCI: Bus 7, cardbus bridge: 0000:02:04.1 IO window: 00003800-000038ff IO window: 00003c00-00003cff PREFETCH window: 54000000-57ffffff PCI: Bridge: 0000:00:0a.0 IO window: 3000-7fff MEM window: e0100000-e17fffff PREFETCH window: 50000000-57ffffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: e2000000-e2ffffff PREFETCH window: f0000000-f80fffff PCI: Setting latency timer of device 0000:00:0a.0 to 64 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -= > IRQ 19 ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -= > IRQ 18 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 65536 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered Simple Boot Flag at 0x37 set to 0x1 PM: Adding info for No Bus:mcelog PM: Adding info for No Bus:msr0 PM: Adding info for No Bus:cpu0 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 PM: Adding info for No Bus:rtc Real Time Clock Driver v1.12ac PM: Adding info for No Bus:hpet Linux agpgart interface v0.102 (c) Dave Jones Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 6= 0 seconds). Hangcheck: Using get_cycles(). loop: module loaded Marvell 88E1101: Registered new driver Marvell 88E1111: Registered new driver Marvell 88E1145: Registered new driver Davicom DM9161E: Registered new driver Davicom DM9161A: Registered new driver Davicom DM9131: Registered new driver Cicada Cis8204: Registered new driver Cicada Cis8201: Registered new driver LXT970: Registered new driver LXT971: Registered new driver QS6612: Registered new driver SMSC LAN83C185: Registered new driver Vitesse VSC8244: Registered new driver Broadcom BCM5411: Registered new driver Broadcom BCM5421: Registered new driver Broadcom BCM5461: Registered new driver ICPlus IP175C: Registered new driver PM: Adding info for No Bus:lo 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 18 (level, low) -= > IRQ 18 PM: Adding info for No Bus:eth0 eth0: RealTek RTL8139 at 0xffffc2000001a800, 00:0f:b0:07:dc:49, IRQ 18 eth0: Identified 8139 chip type 'RTL-8101' pata_amd 0000:00:08.0: version 0.3.8 PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi0 : pata_amd PM: Adding info for No Bus:host0 scsi1 : pata_amd PM: Adding info for No Bus:host1 ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma= 0x0000000000012080 irq 14 ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma= 0x0000000000012088 irq 15 ata1.00: ata_hpa_resize: sectors =3D 195371568, hpa_sectors =3D 195371568 ata1.00: ATA-6: HTS721010G9AT00, MCZOA51A, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48=20 ata1.00: ata_hpa_resize: sectors =3D 195371568, hpa_sectors =3D 195371568 ata1.00: configured for UDMA/100 ata2.00: ATAPI, max MWDMA2 ata2.00: configured for MWDMA2 PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA HTS721010G9AT00 MCZO PQ: 0 ANSI: = 5 PM: Adding info for scsi:0:0:0:0 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk PM: Adding info for No Bus:target1:0:0 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.19 PQ: 0 ANSI: = 5 PM: Adding info for scsi:1:0:0:0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d] PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 50000000-53ffffff MEM window: e0400000-e07fffff Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 19 Socket status: 30000086 Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff PM: Adding info for No Bus:pcmcia_socket0 Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff PM: Adding info for No Bus:pcmcia_socket1 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 PM: Adding info for platform:i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio0 serio: i8042 AUX port at 0x60,0x64 irq 12 PM: Adding info for serio:serio1 PM: Adding info for No Bus:psaux mice: PS/2 mouse device common for all mice TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (1 cpu co= res) (version 2.00.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 swsusp: Resume From Partition /dev/sda3 PM: Checking swsusp image. input: AT Translated Set 2 keyboard as /class/input/input3 PM: Resume from disk failed. Freeing unused kernel memory: 1100k freed PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 reiser4: sda2: found disk format 4.0.0. PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Enabling device 0000:00:02.0 (0004 -> 0006) ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 22, io mem 0xe0000000 usb usb1: new device found, idVendor=3D0000, idProduct=3D0000 usb usb1: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22-rc2-mm1 ohci_hcd usb usb1: SerialNumber: 0000:00:02.0 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected PM: Adding info for No Bus:timer PM: Adding info for No Bus:usbdev1.1_ep81 PCI: Enabling device 0000:00:02.1 (0004 -> 0006) ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, low) -= > IRQ 21 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.1: irq 21, io mem 0xe0001000 usb usb2: new device found, idVendor=3D0000, idProduct=3D0000 usb usb2: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22-rc2-mm1 ohci_hcd usb usb2: SerialNumber: 0000:00:02.1 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected PM: Adding info for No Bus:usbdev2.1_ep81 ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -= > IRQ 22 PCI: Setting latency timer of device 0000:00:06.0 to 64 input: PS/2 Mouse as /class/input/input4 input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 AC'97 0 analog subsections not ready usb 3-2: new high speed USB device using ehci_hcd and address 2 usb 3-2: new device found, idVendor=3D050d, idProduct=3D0237 usb 3-2: new device strings: Mfr=3D0, Product=3D0, SerialNumber=3D0 PM: Adding info for usb:3-2 PM: Adding info for No Bus:usbdev3.2_ep00 usb 3-2: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2:1.0 hub 3-2:1.0: USB hub found hub 3-2:1.0: 7 ports detected PM: Adding info for No Bus:usbdev3.2_ep81 intel8x0_measure_ac97_clock: measured 50207 usecs intel8x0: clocking to 47409 PM: Adding info for No Bus:card0 PM: Adding info for No Bus:pcmC0D2p PM: Adding info for No Bus:pcmC0D1c PM: Adding info for No Bus:pcmC0D0p PM: Adding info for No Bus:pcmC0D0c PM: Adding info for ac97:0-0:AD1981B PM: Adding info for No Bus:controlC0 usb 3-2.1: new low speed USB device using ehci_hcd and address 4 usb 3-2.1: new device found, idVendor=3D045e, idProduct=3D0059 usb 3-2.1: new device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 3-2.1: Product: Microsoft Wireless Intellimouse Explorer=EF=BF=BD 1.0A usb 3-2.1: Manufacturer: Microsoft PM: Adding info for usb:3-2.1 PM: Adding info for No Bus:usbdev3.4_ep00 usb 3-2.1: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2.1:1.0 PM: Adding info for No Bus:usbdev3.4_ep81 usb 3-2.2: new full speed USB device using ehci_hcd and address 5 usb 3-2.2: new device found, idVendor=3D0451, idProduct=3D2036 usb 3-2.2: new device strings: Mfr=3D0, Product=3D1, SerialNumber=3D0 usb 3-2.2: Product: General Purpose USB Hub PM: Adding info for usb:3-2.2 PM: Adding info for No Bus:usbdev3.5_ep00 usb 3-2.2: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2.2:1.0 hub 3-2.2:1.0: USB hub found hub 3-2.2:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.5_ep81 usb 3-2.3: new high speed USB device using ehci_hcd and address 6 usb 3-2.3: new device found, idVendor=3D0781, idProduct=3Db4b5 usb 3-2.3: new device strings: Mfr=3D3, Product=3D4, SerialNumber=3D5 usb 3-2.3: Product: ImageMate 14 in 1 Reader/Writer=20 usb 3-2.3: Manufacturer: SanDisk=20 usb 3-2.3: SerialNumber: 0304237855 PM: Adding info for usb:3-2.3 PM: Adding info for No Bus:usbdev3.6_ep00 usb 3-2.3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2.3:1.0 PM: Adding info for No Bus:usbdev3.6_ep81 PM: Adding info for No Bus:usbdev3.6_ep02 usbcore: registered new interface driver hiddev Initializing USB Mass Storage driver... usb 2-2: new full speed USB device using ohci_hcd and address 2 usb 2-2: new device found, idVendor=3D049f, idProduct=3D0086 usb 2-2: new device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 2-2: Product: Bluetooth by hp usb 2-2: Manufacturer: ACTIONTEC PM: Adding info for usb:2-2 PM: Adding info for No Bus:usbdev2.2_ep00 PM: Adding info for No Bus:usbdev2.2_ep83 PM: Adding info for bluetooth:hci0 input: Logitech USB Receiver as /class/input/input8 PM: Adding info for No Bus:hiddev0 PM: Adding info for No Bus:hidraw2 input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0= 000:00:02.2-2.2.1 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver hci_usb NET: Registered protocol family 10 ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block= 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names Adding 2843496k swap on /dev/disk/by-uuid/fd35277a-8dc7-4afe-8257-fda61b757= 344. Priority:100 extents:1 across:2843496k PM: Adding info for No Bus:target2:0:0 scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9339 PQ: 0 ANSI: = 0 PM: Adding info for scsi:2:0:0:0 sd 2:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg2 type 0 PM: Adding info for No Bus:target2:0:1 PM: Removing info for No Bus:target2:0:1 PM: Adding info for No Bus:target2:0:2 PM: Removing info for No Bus:target2:0:2 PM: Adding info for No Bus:target2:0:3 PM: Removing info for No Bus:target2:0:3 PM: Adding info for No Bus:target2:0:4 PM: Removing info for No Bus:target2:0:4 PM: Adding info for No Bus:target2:0:5 PM: Removing info for No Bus:target2:0:5 PM: Adding info for No Bus:target2:0:6 PM: Removing info for No Bus:target2:0:6 PM: Adding info for No Bus:target2:0:7 PM: Removing info for No Bus:target2:0:7 usb-storage: device scan complete PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Removing info for No Bus:vcs2 PM: Removing info for No Bus:vcsa2 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Removing info for No Bus:vcs3 PM: Removing info for No Bus:vcsa3 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Removing info for No Bus:vcs4 PM: Removing info for No Bus:vcsa4 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Removing info for No Bus:vcs5 PM: Removing info for No Bus:vcsa5 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Removing info for No Bus:vcs6 PM: Removing info for No Bus:vcsa6 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Removing info for No Bus:vcs7 PM: Removing info for No Bus:vcsa7 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Removing info for No Bus:vcs8 PM: Removing info for No Bus:vcsa8 PM: Adding info for No Bus:vcs9 PM: Adding info for No Bus:vcsa9 PM: Removing info for No Bus:vcs9 PM: Removing info for No Bus:vcsa9 PM: Adding info for No Bus:vcs10 PM: Adding info for No Bus:vcsa10 PM: Removing info for No Bus:vcs10 PM: Removing info for No Bus:vcsa10 PM: Adding info for No Bus:vcs11 PM: Adding info for No Bus:vcsa11 PM: Removing info for No Bus:vcs11 PM: Removing info for No Bus:vcsa11 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Removing info for No Bus:vcs2 PM: Removing info for No Bus:vcsa2 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Removing info for No Bus:vcs3 PM: Removing info for No Bus:vcsa3 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Removing info for No Bus:vcs4 PM: Removing info for No Bus:vcsa4 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Removing info for No Bus:vcs5 PM: Removing info for No Bus:vcsa5 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Removing info for No Bus:vcs6 PM: Removing info for No Bus:vcsa6 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Removing info for No Bus:vcs7 PM: Removing info for No Bus:vcsa7 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Removing info for No Bus:vcs8 PM: Removing info for No Bus:vcsa8 PM: Adding info for No Bus:vcs9 PM: Adding info for No Bus:vcsa9 PM: Removing info for No Bus:vcs9 PM: Removing info for No Bus:vcsa9 PM: Adding info for No Bus:vcs10 PM: Adding info for No Bus:vcsa10 PM: Removing info for No Bus:vcs10 PM: Removing info for No Bus:vcsa10 PM: Adding info for No Bus:vcs11 PM: Adding info for No Bus:vcsa11 PM: Removing info for No Bus:vcs11 PM: Removing info for No Bus:vcsa11 Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized ata1.00: ata_hpa_resize: sectors =3D 195371568, hpa_sectors =3D 195371568 ata1.00: ata_hpa_resize: sectors =3D 195371568, hpa_sectors =3D 195371568 ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't suppor= t DPO or FUA BUG: at drivers/hid/hid-core.c:778 implement() Call Trace: [] :hid:hid_output_report+0x1dc/0x270 [] :usbhid:hid_submit_ctrl+0x7a/0x260 [] :usbhid:usbhid_submit_report+0x11e/0x200 [] :usbhid:hiddev_ioctl+0x3e2/0xae0 [] do_page_fault+0x42e/0x880 [] do_ioctl+0x7d/0xa0 [] vfs_ioctl+0x221/0x2d0 [] trace_hardirqs_on+0xc1/0x160 [] sys_ioctl+0x49/0x80 [] system_call+0x7e/0x83 BUG: at drivers/hid/hid-core.c:778 implement() Call Trace: [] :hid:hid_output_report+0x1dc/0x270 [] :usbhid:hid_submit_ctrl+0x7a/0x260 [] :usbhid:usbhid_submit_report+0x11e/0x200 [] :usbhid:hiddev_ioctl+0x3e2/0xae0 [] do_page_fault+0x42e/0x880 [] do_ioctl+0x7d/0xa0 [] vfs_ioctl+0x221/0x2d0 [] trace_hardirqs_on+0xc1/0x160 [] sys_ioctl+0x49/0x80 [] system_call+0x7e/0x83 BUG: at drivers/hid/hid-core.c:778 implement() Call Trace: [] :hid:hid_output_report+0x1dc/0x270 [] :usbhid:hid_submit_ctrl+0x7a/0x260 [] :usbhid:usbhid_submit_report+0x11e/0x200 [] :usbhid:hiddev_ioctl+0x3e2/0xae0 [] do_page_fault+0x42e/0x880 [] do_ioctl+0x7d/0xa0 [] vfs_ioctl+0x221/0x2d0 [] trace_hardirqs_on+0xc1/0x160 [] sys_ioctl+0x49/0x80 [] system_call+0x7e/0x83 BUG: at drivers/hid/hid-core.c:778 implement() Call Trace: [] :hid:hid_output_report+0x1dc/0x270 [] :usbhid:hid_submit_ctrl+0x7a/0x260 [] :usbhid:usbhid_submit_report+0x11e/0x200 [] :usbhid:hiddev_ioctl+0x3e2/0xae0 [] do_page_fault+0x42e/0x880 [] do_ioctl+0x7d/0xa0 [] vfs_ioctl+0x221/0x2d0 [] trace_hardirqs_on+0xc1/0x160 [] sys_ioctl+0x49/0x80 [] system_call+0x7e/0x83 BUG: at drivers/hid/hid-core.c:778 implement() Call Trace: [] :hid:hid_output_report+0x1dc/0x270 [] :usbhid:hid_submit_ctrl+0x7a/0x260 [] :usbhid:usbhid_submit_report+0x11e/0x200 [] :usbhid:hiddev_ioctl+0x3e2/0xae0 [] do_page_fault+0x42e/0x880 [] do_ioctl+0x7d/0xa0 [] vfs_ioctl+0x221/0x2d0 [] trace_hardirqs_on+0xc1/0x160 [] sys_ioctl+0x49/0x80 [] system_call+0x7e/0x83 BUG: at drivers/hid/hid-core.c:778 implement() Call Trace: [] :hid:hid_output_report+0x1dc/0x270 [] :usbhid:hid_submit_ctrl+0x7a/0x260 [] :usbhid:usbhid_submit_report+0x11e/0x200 [] :usbhid:hiddev_ioctl+0x3e2/0xae0 [] do_page_fault+0x42e/0x880 [] do_ioctl+0x7d/0xa0 [] vfs_ioctl+0x221/0x2d0 [] trace_hardirqs_on+0xc1/0x160 [] sys_ioctl+0x49/0x80 [] system_call+0x7e/0x83 BUG: at drivers/hid/hid-core.c:778 implement() Call Trace: [] :hid:hid_output_report+0x1dc/0x270 [] :usbhid:hid_submit_ctrl+0x7a/0x260 [] :usbhid:usbhid_submit_report+0x11e/0x200 [] :usbhid:hiddev_ioctl+0x3e2/0xae0 [] do_page_fault+0x42e/0x880 [] do_ioctl+0x7d/0xa0 [] vfs_ioctl+0x221/0x2d0 [] trace_hardirqs_on+0xc1/0x160 [] sys_ioctl+0x49/0x80 [] system_call+0x7e/0x83 BUG: at drivers/hid/hid-core.c:778 implement() Call Trace: [] :hid:hid_output_report+0x1dc/0x270 [] :usbhid:hid_submit_ctrl+0x7a/0x260 [] :usbhid:usbhid_submit_report+0x11e/0x200 [] :usbhid:hiddev_ioctl+0x3e2/0xae0 [] do_page_fault+0x42e/0x880 [] do_ioctl+0x7d/0xa0 [] vfs_ioctl+0x221/0x2d0 [] trace_hardirqs_on+0xc1/0x160 [] sys_ioctl+0x49/0x80 [] system_call+0x7e/0x83 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D [ INFO: possible circular locking dependency detected ] 2.6.22-rc2-mm1 #1 ------------------------------------------------------- rhythmbox/6976 is trying to acquire lock: (&mm->mmap_sem){----}, at: [] do_page_fault+0x17c/0x880 but task is already holding lock: (&data->latch){----}, at: [] get_exclusive_access+0x11/0= x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&data->latch){----}: [] __lock_acquire+0xbfc/0x1030 [] lock_acquire+0x4b/0x70 [] get_exclusive_access+0x11/0x20 [] down_write+0x2f/0x40 [] get_exclusive_access+0x11/0x20 [] mmap_unix_file+0x58/0x140 [] mmap_region+0x195/0x540 [] do_mmap_pgoff+0x2fe/0x390 [] _spin_unlock_irq+0x2f/0x50 [] elf_map+0xfa/0x100 [] load_elf_binary+0x1c14/0x2110 [] add_lock_to_list+0x65/0xe0 [] __lock_acquire+0xcce/0x1030 [] get_page_from_freelist+0x33e/0x520 [] trace_hardirqs_on+0xc1/0x160 [] get_page_from_freelist+0x215/0x520 [] load_aout_binary+0x0/0x980 [] load_elf_binary+0x0/0x2110 [] search_binary_handler+0xf6/0x290 [] do_execve+0x18f/0x250 [] sys_execve+0x44/0xb0 [] stub_execve+0x67/0xb0 [] 0xffffffffffffffff -> #0 (&mm->mmap_sem){----}: [] print_circular_bug_header+0xe8/0xf0 [] __lock_acquire+0xa32/0x1030 [] _spin_unlock_irqrestore+0x65/0x80 [] lock_acquire+0x4b/0x70 [] do_page_fault+0x17c/0x880 [] down_read+0x32/0x40 [] do_page_fault+0x17c/0x880 [] _spin_unlock_irq+0x24/0x50 [] trace_hardirqs_on+0xc1/0x160 [] _spin_unlock_irqrestore+0x65/0x80 [] error_exit+0x0/0x96 [] file_read_actor+0x44/0x1a0 [] __lock_page+0x5f/0x70 [] do_generic_mapping_read+0x233/0x560 [] file_read_actor+0x0/0x1a0 [] generic_file_aio_read+0x106/0x1a0 [] do_sync_read+0xd9/0x120 [] lockdep_init_map+0x55/0x4e0 [] autoremove_wake_function+0x0/0x30 [] _spin_unlock+0x29/0x50 [] reiser4_grab+0x8c/0xd0 [] read_unix_file+0x454/0x490 [] vfs_read+0xc5/0x180 [] sys_read+0x53/0x90 [] system_call+0x7e/0x83 [] 0xffffffffffffffff other info that might help us debug this: usb 3-2: new high speed USB device using ehci_hcd and address 8 usb 3-2: new device found, idVendor=3D050d, idProduct=3D0237 usb 3-2: new device strings: Mfr=3D0, Product=3D0, SerialNumber=3D0 PM: Adding info for usb:3-2 PM: Adding info for No Bus:usbdev3.8_ep00 usb 3-2: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2:1.0 hub 3-2:1.0: USB hub found hub 3-2:1.0: 7 ports detected PM: Adding info for No Bus:usbdev3.8_ep81 usb 3-2.1: new low speed USB device using ehci_hcd and address 9 usb 3-2.1: new device found, idVendor=3D045e, idProduct=3D0059 usb 3-2.1: new device strings: Mfr=3D1, Product=3D2, SerialNumber=3D0 usb 3-2.1: Product: Microsoft Wireless Intellimouse Explorer=EF=BF=BD 1.0A usb 3-2.1: Manufacturer: Microsoft PM: Adding info for usb:3-2.1 PM: Adding info for No Bus:usbdev3.9_ep00 usb 3-2.1: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2.1:1.0 input: Microsoft Microsoft Wireless Intellimouse Explorer=EF=BF=BD 1.0A as = /class/input/input9 PM: Adding info for No Bus:hidraw0 input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft Wireless Intellimou= se Explorer=EF=BF=BD 1.0A] on usb-0000:00:02.2-2.1 PM: Adding info for No Bus:usbdev3.9_ep81 usb 3-2.2: new full speed USB device using ehci_hcd and address 10 usb 3-2.2: new device found, idVendor=3D0451, idProduct=3D2036 usb 3-2.2: new device strings: Mfr=3D0, Product=3D1, SerialNumber=3D0 usb 3-2.2: Product: General Purpose USB Hub PM: Adding info for usb:3-2.2 PM: Adding info for No Bus:usbdev3.10_ep00 usb 3-2.2: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2.2:1.0 hub 3-2.2:1.0: USB hub found hub 3-2.2:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.10_ep81 usb 3-2.3: new high speed USB device using ehci_hcd and address 11 usb 3-2.3: new device found, idVendor=3D0781, idProduct=3Db4b5 usb 3-2.3: new device strings: Mfr=3D3, Product=3D4, SerialNumber=3D5 usb 3-2.3: Product: ImageMate 14 in 1 Reader/Writer=20 usb 3-2.3: Manufacturer: SanDisk=20 usb 3-2.3: SerialNumber: 0304237855 PM: Adding info for usb:3-2.3 PM: Adding info for No Bus:usbdev3.11_ep00 usb 3-2.3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2.3:1.0 scsi3 : SCSI emulation for USB Mass Storage devices PM: Adding info for No Bus:host3 PM: Adding info for No Bus:usbdev3.11_ep81 PM: Adding info for No Bus:usbdev3.11_ep02 usb-storage: device found at 11 usb-storage: waiting for device to settle before scanning usb 3-2.2.1: new low speed USB device using ehci_hcd and address 12 usb 3-2.2.1: new device found, idVendor=3D046d, idProduct=3Dc704 usb 3-2.2.1: new device strings: Mfr=3D1, Product=3D2, SerialNumber=3D3 usb 3-2.2.1: Product: USB Receiver usb 3-2.2.1: Manufacturer: Logitech usb 3-2.2.1: SerialNumber: 04E5EF PM: Adding info for usb:3-2.2.1 PM: Adding info for No Bus:usbdev3.12_ep00 usb 3-2.2.1: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2.2.1:1.0 input: Logitech USB Receiver as /class/input/input10 PM: Adding info for No Bus:hidraw1 input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:0= 0:02.2-2.2.1 PM: Adding info for No Bus:usbdev3.12_ep81 PM: Adding info for usb:3-2.2.1:1.1 input: Logitech USB Receiver as /class/input/input11 PM: Adding info for No Bus:hiddev0 PM: Adding info for No Bus:hidraw2 input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0= 000:00:02.2-2.2.1 PM: Adding info for No Bus:usbdev3.12_ep82 PM: Adding info for No Bus:target3:0:0 scsi 3:0:0:0: Direct-Access Generic STORAGE DEVICE 9339 PQ: 0 ANSI: = 0 PM: Adding info for scsi:3:0:0:0 sd 3:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 3:0:0:0: [sdb] Assuming drive cache: write through sd 3:0:0:0: [sdb] 8018640 512-byte hardware sectors (4106 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 3:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 3:0:0:0: [sdb] Attached SCSI removable disk sd 3:0:0:0: Attached scsi generic sg2 type 0 PM: Adding info for No Bus:target3:0:1 PM: Removing info for No Bus:target3:0:1 PM: Adding info for No Bus:target3:0:2 PM: Removing info for No Bus:target3:0:2 PM: Adding info for No Bus:target3:0:3 PM: Removing info for No Bus:target3:0:3 PM: Adding info for No Bus:target3:0:4 PM: Removing info for No Bus:target3:0:4 PM: Adding info for No Bus:target3:0:5 PM: Removing info for No Bus:target3:0:5 PM: Adding info for No Bus:target3:0:6 PM: Removing info for No Bus:target3:0:6 PM: Adding info for No Bus:target3:0:7 PM: Removing info for No Bus:target3:0:7 usb-storage: device scan complete --=20 Zan Lynx --=-L0f96yUoHGCiIraEQU3d Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.4 (GNU/Linux) iD8DBQBGVMt1G8fHaOLTWwgRAqv1AJ0QBTw+okM98z/lF/CJlV49cbajgACeNhLK g8PyazjdNGK4dvk2xOurfxM= =SqXB -----END PGP SIGNATURE----- --=-L0f96yUoHGCiIraEQU3d-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/