Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20220617164000.v8.1.Id769ddc5dbf570ccb511db96da59f97d08f75a9c@changeid>
 <20220617164000.v8.4.I41e2c2dc12961fe000ebc4d4ef6f0bc5da1259ea@changeid>
In-Reply-To: <20220617164000.v8.4.I41e2c2dc12961fe000ebc4d4ef6f0bc5da1259ea@changeid>
From:   Doug Anderson <dianders@chromium.org>
Date:   Fri, 17 Jun 2022 17:16:28 -0700
Message-ID: <CAD=FV=XFxpBdsp7HN3B_cyq9un8zCH4bhyZXghBuHnixi2jn3w@mail.gmail.com>
Subject: Re: [PATCH v8 4/5] arm64: dts: qcom: sc7180: Add pazquel dts files
To:     "Joseph S. Barrera III" <joebar@chromium.org>
Cc:     LKML <linux-kernel@vger.kernel.org>,
        Alexandru M Stan <amstan@chromium.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        linux-arm-msm <linux-arm-msm@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi,

On Fri, Jun 17, 2022 at 4:40 PM Joseph S. Barrera III
<joebar@chromium.org> wrote:
>
> Pazquel is a trogdor-based board. These dts files are unchanged copies
> from the downstream Chrome OS 5.4 kernel.
>
> Signed-off-by: Joseph S. Barrera III <joebar@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> (no changes since v7)
>
> Changes in v7:
>     - Incorporated changes from Stephen's "Simplify!" series.

You missed an important bit here. Pazquel has a trackpad, doesn't it?
In the "Simplify!" series Stephen made it so that devices that have a
trackpad need to enable it, right?


> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 5cfd6316768c..dc26704dfe34 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -79,6 +79,10 @@ dtb-$(CONFIG_ARCH_QCOM)      += sc7180-trogdor-mrbland-rev0-auo.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-mrbland-rev0-boe.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-mrbland-rev1-auo.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-mrbland-rev1-boe.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pazquel-lte-parade.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pazquel-lte-ti.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pazquel-parade.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pazquel-ti.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pompom-r1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pompom-r1-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += sc7180-trogdor-pompom-r2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
> new file mode 100644
> index 000000000000..ecedab8d1662
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Pazquel board device tree source
> + *
> + * Copyright 2021 Google LLC.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc7180.dtsi"

This is not good and was an important part of "Simplify!" sc7180.dtsi
should only be included by sc7180-trogdor.dtsi.


> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
> new file mode 100644
> index 000000000000..5991c94b4aa1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
> @@ -0,0 +1,218 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Pazquel board device tree source
> + *
> + * Copyright 2021 Google LLC.
> + */
> +
> +#include "sc7180-trogdor.dtsi"
> +
> +&ap_sar_sensor {
> +       compatible = "semtech,sx9324";
> +       semtech,ph0-pin = <1 3 3>;
> +       semtech,ph1-pin = <3 1 3>;
> +       semtech,ph2-pin = <1 3 3>;
> +       semtech,ph3-pin = <0 0 0>;
> +       semtech,ph01-resolution = <1024>;
> +       semtech,ph23-resolution = <1024>;
> +       semtech,startup-sensor = <1>;
> +       semtech,ph01-proxraw-strength = <3>;
> +       semtech,ph23-proxraw-strength = <1>;
> +       semtech,avg-pos-strength = <128>;


You seem to be missing the recent downstream changes here.

semtech,input-analog-gain = <0>;
semtech,cs-idle-sleep = "gnd";

You had this right in one of your two v6 series. Not sure why you keep
regressing random things each version...

-Doug