Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <18c0e9c9-f0c9-7458-8287-e52f63247c16@foss.st.com>
Date:   Tue, 21 Jun 2022 15:39:40 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.9.1
Subject: Re: [PATCH 2/4] i2c: stm32: only perform a reset if there is a reset
 property
Content-Language: en-US
To:     Alain Volmat <alain.volmat@foss.st.com>, <wsa@kernel.org>,
        <robh+dt@kernel.org>
CC:     <mark.rutland@arm.com>, <mcoquelin.stm32@gmail.com>,
        <alexandre.torgue@foss.st.com>, <linux-i2c@vger.kernel.org>,
        <devicetree@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <fabrice.gasnier@foss.st.com>,
        <amelie.delaunay@foss.st.com>
References: <20220620105405.145959-1-alain.volmat@foss.st.com>
 <20220620105405.145959-3-alain.volmat@foss.st.com>
From:   Pierre Yves MORDRET <pierre-yves.mordret@foss.st.com>
In-Reply-To: <20220620105405.145959-3-alain.volmat@foss.st.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi All

Look good to me.

Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>

Regards

On 6/20/22 12:54, Alain Volmat wrote:
> Allow the driver to properly initialize even if there is no reset
> property given.  In such case reset control is not done and
> initialization proceed.
> 
> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
> ---
>  drivers/i2c/busses/i2c-stm32f7.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index 6d4aa64b195d..b29d8e476342 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -2138,13 +2138,14 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
>  
>  	rst = devm_reset_control_get(&pdev->dev, NULL);
>  	if (IS_ERR(rst)) {
> -		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
> -				    "Error: Missing reset ctrl\n");
> -		goto clk_free;
> +		ret = PTR_ERR(rst);
> +		if (ret == -EPROBE_DEFER)
> +			goto clk_free;
> +	} else {
> +		reset_control_assert(rst);
> +		udelay(2);
> +		reset_control_deassert(rst);
>  	}
> -	reset_control_assert(rst);
> -	udelay(2);
> -	reset_control_deassert(rst);
>  
>  	i2c_dev->dev = &pdev->dev;
>  

-- 
--
~ Py MORDRET
--