Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Robert Foss <robert.foss@linaro.org>
To:     bjorn.andersson@linaro.org, agross@kernel.org,
        mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
        krzk+dt@kernel.org, jonathan@marek.ca, robert.foss@linaro.org,
        linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>
Subject: [PATCH v6 4/6] clk: qcom: add support for SM8350 DISPCC
Date:   Wed, 22 Jun 2022 01:34:10 +0200
Message-Id: <20220621233412.506768-5-robert.foss@linaro.org>
In-Reply-To: <20220621233412.506768-1-robert.foss@linaro.org>
References: <20220621233412.506768-1-robert.foss@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Jonathan Marek <jonathan@marek.ca>

Add support to the SM8350 display clock controller by extending the SM8250
display clock controller, which is almost identical but has some minor
differences.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---

Changes since v1
 - Remove comment - Dmitry

Changes since v2
 - Add my SoB - Bjorn
 - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag

Changes since v3
 - Add kconfig dependency on SM_GCC_8350 - Konrad
 - Change hex to lowercase - Konrad
 - Split from dispcc-sm8250.c implementation
 - Switch from .fw_name to .index

Changes since v4
 - Hex to lowercase - Konrad
 - Remove bad match table entries - Konrad

Changes since v5
 - Reverted split from dispcc-sm8250
 - Re-added tags from v3


 drivers/clk/qcom/Kconfig         |  4 +--
 drivers/clk/qcom/dispcc-sm8250.c | 60 +++++++++++++++++++++++++++++++-
 2 files changed, 61 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index b11235c21952..4c3d1a548b7a 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -618,11 +618,11 @@ config SM_DISPCC_6125
 	  splash screen
 
 config SM_DISPCC_8250
-	tristate "SM8150 and SM8250 Display Clock Controller"
+	tristate "SM8150/SM8250/SM8350 Display Clock Controller"
 	depends on SM_GCC_8150 || SM_GCC_8250
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
-	  SM8150 and SM8250 devices.
+	  SM8150/SM8250/SM8350 devices.
 	  Say Y if you want to support display devices and functionality such as
 	  splash screen.
 
diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index db9379634fb2..4e101d584115 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = {
 	{ 249600000, 2000000000, 0 },
 };
 
+static struct pll_vco lucid_5lpe_vco[] = {
+	{ 249600000, 1750000000, 0 },
+};
+
 static struct alpha_pll_config disp_cc_pll0_config = {
 	.l = 0x47,
 	.alpha = 0xE000,
@@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
 	{ .compatible = "qcom,sc8180x-dispcc" },
 	{ .compatible = "qcom,sm8150-dispcc" },
 	{ .compatible = "qcom,sm8250-dispcc" },
+	{ .compatible = "qcom,sm8350-dispcc" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
@@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 		return PTR_ERR(regmap);
 	}
 
-	/* note: trion == lucid, except for the prepare() op */
+	/* Apply differences for SM8150 and SM8350 */
 	BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
 	if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
 	    of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
@@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 		disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
 		disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
 		disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
+	} else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
+		static struct clk_rcg2 * const rcgs[] = {
+			&disp_cc_mdss_byte0_clk_src,
+			&disp_cc_mdss_byte1_clk_src,
+			&disp_cc_mdss_dp_aux1_clk_src,
+			&disp_cc_mdss_dp_aux_clk_src,
+			&disp_cc_mdss_dp_link1_clk_src,
+			&disp_cc_mdss_dp_link_clk_src,
+			&disp_cc_mdss_dp_pixel1_clk_src,
+			&disp_cc_mdss_dp_pixel2_clk_src,
+			&disp_cc_mdss_dp_pixel_clk_src,
+			&disp_cc_mdss_esc0_clk_src,
+			&disp_cc_mdss_mdp_clk_src,
+			&disp_cc_mdss_pclk0_clk_src,
+			&disp_cc_mdss_pclk1_clk_src,
+			&disp_cc_mdss_rot_clk_src,
+			&disp_cc_mdss_vsync_clk_src,
+		};
+		static struct clk_regmap_div * const divs[] = {
+			&disp_cc_mdss_byte0_div_clk_src,
+			&disp_cc_mdss_byte1_div_clk_src,
+			&disp_cc_mdss_dp_link1_div_clk_src,
+			&disp_cc_mdss_dp_link_div_clk_src,
+		};
+		unsigned int i;
+		static bool offset_applied;
+
+		/* only apply the offsets once (in case of deferred probe) */
+		if (!offset_applied) {
+			for (i = 0; i < ARRAY_SIZE(rcgs); i++)
+				rcgs[i]->cmd_rcgr -= 4;
+
+			for (i = 0; i < ARRAY_SIZE(divs); i++) {
+				divs[i]->reg -= 4;
+				divs[i]->width = 4;
+			}
+
+			disp_cc_mdss_ahb_clk.halt_reg -= 4;
+			disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
+
+			offset_applied = true;
+		}
+
+		disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
+
+		disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c;
+		disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
+		disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
+		disp_cc_pll0.vco_table = lucid_5lpe_vco;
+		disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c;
+		disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
+		disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
+		disp_cc_pll1.vco_table = lucid_5lpe_vco;
 	}
 
 	clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
-- 
2.34.1