Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 28 Jun 2022 11:51:36 +0200
From:   Pali =?utf-8?B?Um9ow6Fy?= <pali@kernel.org>
To:     Ilpo =?utf-8?B?SsOkcnZpbmVu?= <ilpo.jarvinen@linux.intel.com>
Cc:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Jiri Slaby <jirislaby@kernel.org>,
        Allen Yan <yanwei@marvell.com>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        Gregory CLEMENT <gregory.clement@bootlin.com>,
        linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] serial: mvebu: Apply old baudrate to termios
Message-ID: <20220628095136.fhtjjjkj3mre7hwa@pali>
References: <20220628094155.26297-1-ilpo.jarvinen@linux.intel.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20220628094155.26297-1-ilpo.jarvinen@linux.intel.com>
User-Agent: NeoMutt/20180716
Precedence: bulk

On Tuesday 28 June 2022 12:41:55 Ilpo Järvinen wrote:
> A fallback baud rate was derived from old termios but got never applied
> to (new/current) termios. Old termios is dropped once ->set_termios()
> call chain completes, only termios persists the values. Encode also the
> old baud rate into termios.
> 
> Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Hello! Could you explain a bit more what is this patch fixing? I have
not caught it yet. Do you have a test scenario which can demonstrate
this issue? Because I have tested this driver more deeply (on Mox
and Espressobin) and I have not seen any remaining issue with reporting
incorrect baudrate.

> ---
>  drivers/tty/serial/mvebu-uart.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
> index 0429c2a54290..12a79018697f 100644
> --- a/drivers/tty/serial/mvebu-uart.c
> +++ b/drivers/tty/serial/mvebu-uart.c
> @@ -592,10 +592,9 @@ static void mvebu_uart_set_termios(struct uart_port *port,
>  		if (old)
>  			baud = uart_get_baud_rate(port, old, NULL,
>  						  min_baud, max_baud);
> -	} else {
> -		tty_termios_encode_baud_rate(termios, baud, baud);
> -		uart_update_timeout(port, termios->c_cflag, baud);
>  	}
> +	tty_termios_encode_baud_rate(termios, baud, baud);
> +	uart_update_timeout(port, termios->c_cflag, baud);
>  
>  	/* Only the following flag changes are supported */
>  	if (old) {
> 
> -- 
> tg: (f287f971e256..) fix/mvebu-apply-old-baud (depends on: tty-next)