Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Tue, 28 Jun 2022 15:47:59 +0200
From:   Michael Walle <michael@walle.cc>
To:     Andy Shevchenko <andy.shevchenko@gmail.com>
Cc:     Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        "Rafael J. Wysocki" <rafael@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
        devicetree <devicetree@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Horatiu Vultur <horatiu.vultur@microchip.com>
Subject: Re: fwnode_for_each_child_node() and OF backend discrepancy
In-Reply-To: <CAHp75VcANMjxgS6S24Zh+mz66usb6LBnQk-ENvU9JHSXXsG1DA@mail.gmail.com>
References: <4e1d5db9dea68d82c94336a1d6aac404@walle.cc>
 <Yrrhs3D++V79/4Jk@smile.fi.intel.com>
 <f17d3ecfecf4491dd15b1fa092205f3f@walle.cc>
 <CAHp75Vd6e3WwHPfyL=GP=vsoWhwGXadwQziiRRwfHPfjkX2eFg@mail.gmail.com>
 <2f2d7685e0e43194270a310034004970@walle.cc>
 <CAHp75VcANMjxgS6S24Zh+mz66usb6LBnQk-ENvU9JHSXXsG1DA@mail.gmail.com>
User-Agent: Roundcube Webmail/1.4.13
Message-ID: <9e58f421c27121977d11381530757a6e@walle.cc>
Precedence: bulk

[adding Horatiu Vultur, because we now digress to the bug
in the switch, rather than that odd OF behavior]

Am 2022-06-28 15:29, schrieb Andy Shevchenko:
> On Tue, Jun 28, 2022 at 3:23 PM Michael Walle <michael@walle.cc> wrote:
>> 
>> >> I was trying to fix the lan966x driver [1] which doesn't work if there
>> >> are disabled nodes in between.
>> >
>> > Can you elaborate what's wrong now in the behaviour of the driver? In
>> > the code it uses twice the _available variant.
>> 
>> Imagine the following device tree snippet:
>>   port0 {
>>     reg = <0>;
>>     status = "okay";
>>   }
>>   port1 {
>>     reg = <1>;
>>     status = "disabled";
>>   }
>>   port@2 {
>>     reg = <2>;
>>     status = "okay";
>>   }
>> 
>> The driver will set num_phys_ports to 2. When port@2 is probed, it
>> will have the (correct!) physical port number 2. That will then
>> trigger various EINVAL checks with "port_num >= num_phys_ports" or
>> WARN()s.
> 
> It means the above mentioned condition is wrong: it should be
> 
> "port_idx >= num_phys_ports" (if the port_idx doesn't exists, that's
> the bug in the first place)

I can't follow you here. Please note, that you need the actual
physical port number. It's not a made up number, but corresponds
to a physical port on that ethernet switch. So you can't just skip
the disabled ones. port@2 must have port number 2.

>> So the easiest fix would be to actual count all the child nodes
>> (regardless if they are available or not), assuming there are as
>> many nodes as physical ports.
>> 
>> But num_phys_ports being a property of the hardware
> 
> So, name is wrong, that's how I read it, it should be
> num_of_acrive_phys_ports (or alike).

See above, it is not just an iterator but corresponds to
a hardware property.

>> I don't
>> think it's good to deduce it by counting the child nodes anyway,
> 
> Right.
> 
>> but it should rather be a (hardcoded) property of the driver.
> 
> Also good to update.

Horatiu, can we determine the actual number of ports (or maybe
determine if its a LAN9668 or a LAN9662) from the hardware itself
in an easy way? That way we wouldn't need a new compatible string,
but could use the generic "lan966x" one.

-michael

[1] 
https://elixir.bootlin.com/linux/v5.19-rc4/source/drivers/net/ethernet/microchip/lan966x/lan966x_main.c